Research ArticleOpen AccessGoogle Scholar indexed
Facile Synthesis and Thermal Stability of Nanocrystalline Molybdenum Carbide
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Materials Sciences and Applications·Volume 02 (2011)·Pages 1313–1316·Published 27 September 2011·DOI10.4236/msa.2011.29178
Copy link · social · email
Abstract
Nanocrystalline molybdenum carbide (Mo<sub>2</sub>C) was prepared via one simple route by the reaction of metallic magnesium powders with molybdenum trioxide and potassium acetate in an autoclave at the condition of 600℃ and 4 h. X-ray powder diffraction (XRD) pattern indicated that the product was hexagonal α-Mo<sub>2</sub>C, and the cell constant was a = 3.0091 Å, c = 4.7368 Å. Scanning electron microscopy (SEM) image showed that the sample consisted of particles with an average size of about 100 nm in diameter. The product was also studied by the thermogravimetric analysis (TGA). It had good thermal stability and oxidation resistance below 450℃ in air.
KeywordsMolybdenum CarbideChemical SynthesisX-Ray DiffractionThermogravimetric Analysis
- T. Hachisuka, “Role of Molybdenum Carbide in Promoting Densification During Sintering of TiC-TiN-Mo sub 2 C-Cr sub 3 C sub 2 Ceramic Composite,” Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 38, No. 2, February1991, pp. 145-152.doi:10.2497/jjspm.38.145
- H. C. Kim, H. K. Park, I. K. Jeong, I. Y. Ko and I. J. Shon, “Sintering of Binderless WC-Mo2C Hard Materials by Rapid Sintering Process,” Ceramics International, Vol. 34, No. 6, 2008, pp. 1419-1423. doi:10.1016/j.ceramint.2007.03.029
- Z. Guo, J. Xiong, M. Yang, J. Wang, L. Sun, Y. Wu, J. Chen and S. Xiong, “Microstructure and Properties of Ti(C,N)-Mo2C-Fe Cermets,” International Journal of Refractory Metals & Hard Materials, Vol. 27, No. 4, 2009, pp. 781-783.
- X. H. Wang, F. Han, X. M. Liu, S. Y. Qu and Z. D. Zou, “Effect of Molybdenum on the Microstructure and Wear Resistance of Fe-Based Hardfacing Coatings,” Materials Science and Engineering A, Vol. 489, No. 1-2, 2009, pp. 193-200. doi:10.1016/j.msea.2007.12.020
- G. Z. Jin, J. H. Zhu, X. J. Fan, G. D. Sun and J. B. Gao, “Effect of Ni Promoter on Dibenzothiophene Hydrodesulfurization Performance of Molybdenum Carbide Catalyst,” Chinese Journal of Catalysis, Vol. 27, No. 10, October 2006, pp. 899-903. doi:10.1016/S1872-2067(06)60046-6
- M. L. Xiang, D. B. Li , W. H. Li, B. Zhong and Y. H. Sun, “Performances of Mixed Alcohols Synthesis over Potassium Promoted Molybdenum Carbides,” Fuel, Vol. 85, No. 17-18, 2006, pp. 2662-2665. doi:10.1016/j.fuel.2006.05.012
- E. C. Weigert, J. South, S. A. Rykov and J. G. Chen, “Multifunctional Composites Containing Molybdenum Carbides as Potential Electrocatalysts,” Catalysis Today, Vol. 99, No. 3-4, 2005, pp. 285-290. doi:10.1016/j.cattod.2004.10.003
- M. Lewandowski, A. Szymanska-Kolasa, P. Da Costa and C. Sayag, “Catalytic Performances of Platinum Doped Molybdenum Carbide for Simultaneous Hydrodenitrogenation and Hydrodesulfurization,” Catalysis Today, Vol. 119, No. 1-4, 2007, pp. 31-34. doi:10.1016/j.cattod.2006.08.062
- J. M. Cheng and W. Huang, “Effect of Cobalt (Nickel) Content on the Catalytic Performance of Molybdenum Carbides in Dry-Methane Reforming,” Fuel Processing Technology, Vol. 91, No. 2, February 2010, pp. 185-193. doi:10.1016/j.fuproc.2009.09.011
- M. Nagai and K. Matsuda, “Low-Temperature Water-Gas Shift Reaction over Cobalt-Molybdenum Carbide Catalyst,” Journal of Catalysis, Vol. 238, No. 2, 2006, pp. 489-496. doi:10.1016/j.jcat.2006.01.003