Effect of Electric Field Strength and Water Content on the Electrorheology of Silica Dispersions
- 1 Faculty of Health and Applied Sciences, Namibia University of Science and Technology, Windhoek, Namibia
Abstract
The effect of water content on the electrorheological effect (ERE) behaviour of silica dispersions has been investigated. The types of silica powders were fumed silica, precipitated and acid washed silica and colloidal silica. Silica dispersions with a water content varying in the range 10% - 30%, and with conducting ions deliberately added, were redispersed in chlorinated hydrocarbon oil and then the ER behaviour studied. Samples were tested on a static yield rig (SYR), an instrument which can measure both the yield stress and the conductivity. The effects of electric field strength and water content on the ERE were studied. The yield stress initially increased with increase in electric field strength and then decreased at high electric fields suggesting a breakdown in structure of the electrorheological fluid samples tested. It was also found that the ERE increased and electric saturation or electric breakdown shifted to lower electric fields as the water content increased. Higher electric fields caused a drop in the ERE.
- Sheng, P., Wen, W. and Huang, X. (2008) Electrorheological Fluids: Structures and Mechanisms. Soft Matter, 4, 200-210. https://doi.org/10.1039/B710948M
- Winslow, W.M. (1949) Induced Fibration of Suspensions. Journal of Applied Physics, 20, 1137-1140. https://doi.org/10.1063/1.1698285
- Inasaki, A.I. (1997) Application of Electrorheological Fluid Dampers to Machine Tool Elements. CIRP Annals-Manufacturing Technology, 46, 309-312.
- Gawade, S.S. and Jadhav, A.A. (2012) A Review on Electrorheological (ER) Fluids and Its Applications. International Journal of Engineering Research & Technology, 1, 1-7.
- Wen, W., Huang, X., Yang, S., Lu, K. and Sheng, P. (2003) The Giant Electrorheological Effect in Suspensions of Nanoparticles. Nature Materials, 2, 727-730. https://doi.org/10.1038/nmat993
- Monkman, G.J. (1991) Addition of Solid Structures to Electrorheological Fluids. Journal of Rheology, 35, 1385-1387. https://doi.org/10.1122/1.550237
- Bergna, H.E., Ed. (1994) The Colloid Chemistry of Silica. In: Comstock, J., Ed., Advances in Chemistry Series, Vol. 234, American Chemical Society, Washington DC. https://doi.org/10.1021/ba-1994-0234
- Tam, W.Y., Yi, G.H., Wen, W., Loy, M.M.T. and Sheng, P. (1997) New Electrorheological Fluid: Theory and Experiment. Physical Review Letters, 78, 2987-2990. https://doi.org/10.1103/PhysRevLett.78.2987
- Unal, H.I., Sahan, B. and Erol, O. (2012) Investigation of Electrokinetic and Electrorheological Properties of Polyindole Prepared in the Presence of a Surfactant. Materials Chemistry and Physics, 134, 382-391.
- Deinega, Y.F. and Vindogradov, G.V. (1984) Electric Fields in the Rheology of Disperse Systems. Rheologica Acta, 23, 636-651. https://doi.org/10.1007/BF01438804
- Brunn, P.O. and Abu-Jdayi, B. (2004) A Phenomenological Model of Electrorheological Fluids. Rheologica Acta, 43, 62-67. https://doi.org/10.1007/s00397-003-0320-0
- Cabuka, M., Yavuza, M. and Unalb, H.I. (2016) Electrokinetic, Electrorheological and Viscoelastic Properties of Polythiophene-Graft-Chitosan Copolymer Particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 510, 231-238.
- Puvanatvattana, T., Chotpattananont, D., Hiamtup, P., Niamlang, S., Kunanuruksapong, R., Sirivat, A. and Jamieson, A.M. (2008) Electric Field Induced Stress Moduli of Polythiophene/Polyisoprene Suspensions: Effects of Particle Conductivity and Concentration. Materials Science and Engineering C, 28, 119-128.