Sol-gel titania films were deposited on 316L stainless steel using titanium isopropoxide as a chemical precursor. Dip-coating was performed at withdrawal speeds of 6 mm/min, 30 mm/min, and 60 mm/min. Deposited gel films were heat treated in air at 80℃, 100℃, 300℃, and 400℃. The structural evolution of the coatings was evaluated by infrared reflection-absorption spectroscopy. The influence of the withdrawal speed and the heat treatment temperature on the structure of the films was studied by varying the reflectance incidence angle during the infrared experiments and by Glow Discharge Spectrometry. Free functional groups were detected. The results indicate the formation of bidendate bridging coordination of carboxylic acid to titanium. Titanium atoms can also be pentacoordinated according to the processing conditions of the films. We observed a tendency of increasing amounts of OH groups with decreasing reflectance incidence angle. The film hardness was measured via Knoop microindenation hardness test.
Y. Xu, C. J. Chen, R. Xu and J. D. Mackenzie, “Ferroelectric Sr0.60Ba0.40Nb2O 6 Thin Films by the Sol-Gel Process: Electrical and Optical Properties,” Physical Review B, Vol. 44, No. 1, 1991, pp. 35-41. doi:10.1103/PhysRevB.44.35
B. D. Fabes, B. J. J. Zelinski and D. R. Uhlmann, “Sol-Gel Ceramic Coatings,” In: J. B. Wachtman and R. A. Haber, Eds., Ceramic Films and Coatings, Noyes Publication, Saddle River, 1993, pp. 224-283.
A. Yasumori, H. Shinoda, Y. Kameshima, S. Hayashi and K. Okada, “Photocatalytic and Photoelectrochemical Properties of TiO2-Based Multiple Layer Thin Film Prepared by Sol-Gel and Reactive-Sputtering Methods,” Journal of Materials Chemistry, Vol. 11, No. 4, 2001, pp. 1253-1257. doi:10.1039/b100216n
L. L. Hench and W. L. Vasconcelos, “Sol-Gel Silica Science,” Annual Review in Materials Science, Vol. 20, 1990, pp. 269-298. doi:10.1146/annurev.ms.20.080190.001413
C. McDonagh, F. Sheridan, T. Butler and B. D. MacCraith, “Characterisation of Sol-Gel-Derived Silica Films,” Journal of Non-Crystalline Solids, Vol. 194, No. 1-2, 1996, pp. 72-77. doi:10.1016/0022-3093(95)00488-2
K. Izumi, N. Minami and Y. Uchida, “Sol-Gel Derived Coatings on Steel Sheets,” Key Engineering Materials, Vol. 150, 1998, pp. 77-88. doi:10.4028/www.scientific.net/KEM.150.77
J. Oh, H. Imai and H. Hirashima, “Direct Deposition of Silica Films Using Silicon Alkoxide Solution,” Journal of Non-Crystalline Solids, Vol. 241, No. 2-3, 1998, pp. 91-97. doi:10.1016/S0022-3093(98)00772-8
H. Ohsaki and Y. Kokubu, “Global Market and Technology Trends on Coated Glass for Architectural, Automotive and Display Applications,” Thin Solid Films, Vol. 351, No. 1-2, 1999, pp. 1-7. doi:10.1016/S0040-6090(99)00147-9
L. M. Sheppard, “Sol-Gel: Making Its Way into the Mainstream,” Photonics Spectra, Vol. 34, No. 1, 2000, pp. 128-132.
D. C. L. Vasconcelos, J. A. N. Carvalho, M. Mantel and W. L. Vasconcelos, “Corrosion Resistance of Stainless Steel Coated with Sol-Gel Silica,” Journal of Non-Crystalline Solids, Vol. 273, No. 1-3, 2000, pp. 135-139. doi:10.1016/S0022-3093(00)00155-1
T. Lampke, S. Darwich, D. Nickel and B. Wielage, “Development and Characterization of Sol-Gel Composite Coatings on Aluminum Alloys for Corrosion Protection,” Materialwissenschaft und Werkstofftechnik, Vol. 39, No. 12, 2008, pp. 914-919. doi:10.1002/mawe.200800396
T. Gichuhi, A. Balgeman, A. Adams and S. Prince, “Hybrid Sol-Gel Corrosion Inhibitors: A Novel Approach to Corrosion Inhibitorsfor Coating,” Journal of Coatings Technology, Vol. 6, No. 4, 2009, pp. 24-29.
G. Tsaneva, V. Kozhukharov, S. Kozhukharov, M. Iva- nova, J. Gerwann, M. Schem and T. Schmidt, “Functional Nanocomposite Coatings for Corrosion Protection of Aluminum Alloy and Steel,” Journal of the University of Chemical Technology and Metallurgy, Vol. 43, No. 2, 2008, pp. 231-238.
M. Guglielmi, “Sol-Gel Coatings on Metals,” Journal of Sol-Gel Science and Technology, Vol. 8, No. 1-3, 1997, pp. 443-449. doi:10.1007/BF02436880
K. Izumi, N. Minami and Y. Uchida, “Sol-Gel-Derived Coatings on Steel Sheets,” Key Engineering Materials, Vol. 150, 1998, pp. 77-88. doi:10.4028/www.scientific.net/KEM.150.77
M. Atik, S. H. Messaddeq, F. P. Luna and M. A. Aegerter, “Zirconia Sol-Gel Coatings Deposited on 304 and 316L Stainless Steel for Chemical Protection in Acid Media,” Journal of Materials Science Letters, Vol. 15, No. 23, 1996, pp. 2051-2054.
L. Landau and B. Levich, “Dragging of a liquid by a moving plate,” Acta Physicochimica U.R.S.S., Vol. 17, No. 1-2, 1942, pp. 42-54.
D. L. Wood, E. M. Rabinovich, D. W. Johnson Jr., J. B. Mac- Chesney and E. M. Vogel, “Preparation of High-Silica Glasses from Colloidal Gels. 3. Infrared Spectrophotometric Studies,” Journal of the American Ceramic Society, Vol. 66, No. 10, 1983, pp. 693-699. doi:10.1111/j.1151-2916.1983.tb10531.x
M. Burgos and M. Langlet, “The Sol-Gel Transformation of TIPT Coatings: A FTIR Study,” Thin Solid Films, Vol. 349, No. 1-2, 1999, pp. 19-23. doi:10.1016/S0040-6090(99)00139-X
R. Urlaub, U. Posset and R. Thull, “FT-IR Spectroscopic Investigations on Sol-Gel-Derived Coatings from Acid- Modified Titanium Alkoxides,” Journal of Non-Crystalline Solids, Vol. 265, No. 3, 2000, pp. 276-284. doi:10.1016/S0022-3093(00)00003-X
P. A. Venz, R. L. Frost and J. T. Kloprogge, “Chemical Properties of Modified Titania Hydrolysates,” Journal of Non-Crystalline Solids, Vol. 276, No. 1-3, 2000, pp. 95- 112. doi:10.1016/S0022-3093(00)00267-2
S. Doeuff, M. Henry, C. Sanchez and J. Livage, “Hydrolysis of titanium alkoxides: Modification of the molecular precursor by acetic acid,” Journal of Non-Crystal- line Solids, Vol. 89, No. 1-2, January 1987, pp. 206-216. doi:10.1016/S0022-3093(87)80333-2
F. N. Castellano, J. M. Stipkala, L. A. Friedman and G. L. Meyer, “Spectroscopic and excited-state properties of Titanium-Dioxide Gels,” Chemistry of Materials, Vol. 6, No. 11, 1994, pp. 2123-2129. doi:10.1021/cm00047a037
C. Sanches, F. Babonneau, S. Doeuff, A. Leaustic, “Chemical Modifications of Titanium Alkoxide Precursors,” In: J. D. Mackenzie and D. R. Ulrich, Eds., Ultrastructure Processing of Advanced Materials, John Wiley, New York, 1988, pp. 77-78.
C. J. Brinker and G. W. Scherer, “Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing,” Academic Press, New York, 1990.
D. P. Birnie, “Esterification Kinetics in Titanium Isopropoxide-Acetic Acid Solutions,” Journal of Materials Science, Vol. 35, No. 2, 2000, pp. 367-374. doi:10.1023/A:1004770007284
Y. Djaoued, S. Badilescu, P. V. Ashrit and J. Robichaud, “Vibrational Properties of the Sol-Gel Prepared Nanocrystalline TiO2 Thin Films,” The Internet Journal of Vibrational Spectroscopy, Vol. 5, Section 4, 2001. http://www.ijvs.com/archive.html
M. Crisan, M. Zaharescu, A. Jitianu, D. Crisan and M. Preda, “Sol-Gel Poly-Component Nano-Sized Oxide Powders,” Journal of Sol-Gel Science and Technology, Vol. 19, No. 1-3, 2000, pp. 409-412. doi:10.1023/A:1008735127136
H. Izutsu, P. K. Nair, K. Maeda, Y. Kiyozumi and F. Mizukami, “Structure and Properties of TiO2-SiO2 Prepared by Sol-Gel Method in the Presence of Tartaric Acid,” Materials Research Bulletin, Vol. 32, No. 9, S1997, pp. 1303-1311. doi:10.1016/S0025-5408(97)00106-2
D. C. Bradley, R. C. Mehrotra and D. P. Gaur, “Metal Alkoxides,” Academic Press, New York, 1978.
C. M. Phillippi and S. R. Lyon, “Longitudinal-Optical Phonons in TiO2 (Rutile) Thin-Film Spectra,” Physical Review B, Vol. 3, No. 6, 1971, pp. 2086-2087. doi:10.1103/PhysRevB.3.2086
S. Musi? , M. Goti?, M. Ivanda, S. Popovi?, A. Turkovi?, R. Trojko, A. Sekuli? and K. Furi?, “Chemical and Microstructural Properties of TiO2 Synthesized by Sol-Gel Procedure,” Materials Science and Engineering B, Vol. 47, No. 1, 1997, pp. 33-40. doi:10.1016/S0921-5107(96)02041-7