Prediction of Weld Joint Shape and Dimensions in Laser Welding Using a 3D Modeling and Experimental Validation
- 1 Engineering Department, University of Quebec at Rimouski, Rimouski, Canada
- 2 Engineering Department, University of Quebec at Rimouski, Rimouski, Canada
Abstract
This paper presents an experimentally validated weld joint shape and dimensions predictive 3D modeling for low carbon galvanized steel in butt-joint configurations. The proposed modelling approach is based on metallurgical transformations using temperature dependent material properties and the enthalpy method. Conduction and keyhole modes welding are investigated using surface and volumetric heat sources, respectively. Transition between the heat sources is carried out according to the power density and interaction time. Simulations are carried out using 3D finite element model on commercial software. The simulation results of the weld shape and dimensions are validated using a structured experimental investigation based on Taguchi method. Experimental validation conducted on a 3 kW Nd: YAG laser source reveals that the modelling approach can provide not only a consistent and accurate prediction of the weld characteristics under variable welding parameters and conditions but also a comprehensive and quantitative analysis of process parameters effects. The results show great concordance between predicted and measured values for the weld joint shape and dimensions.
- Mazumder, J. (1982) Laser Welding: State of the Art Review. Journal of the Minerals, metals, and Materials Society, 34, 16-24. https://doi.org/10.1007/BF03338045
- Assuncao, E., Williams, S. and Yapp, D. (2012) Interaction Time and Beam Diameter Effects on the Conduction Mode Limit. Optics and Lasers in Engineering, 50, 823-828.
- Kuang, J.H., Hung, T.P. and Chen, C.K. (2012) A Keyhole Volumetric Model for Weld Pool Analysis in Nd: YAG Pulsed Laser Welding. Optics & Laser Technology, 44, 1521-1528.
- Otto, A. and Schmidt, M. (2010) Towards a Universal Numerical Simulation Model for Laser Material Processing. Physics Procedia, 5, 35-46.
- Mackwood, A.P. and Crafer, R.C. (2005) Thermal Modelling of Laser Welding and Related Processes: A Literature Review. Optics & Laser Technology, 37, 99-115.
- Rosenthal, D. (1946) The Theory of Moving Sources of Heat and Its Application to Metal Treatments. ASME, Cambridge.
- Eagar, T. and Tsai, N. (1983) Temperature Fields Produced by Traveling Distributed Heat Sources. Welding Journal, 62, 346-355.
- Goldak, J., Chakravarti, A. and Bibby, M. (1984) A New Finite Element Model for Welding Heat Sources. Metallurgical Transactions B, 15, 299-305. https://doi.org/10.1007/BF02667333
- Pang, S., Chen, X., Zhou, J., Shao, X. and Wang, C. (2015) 3D Transient Multiphase Model for Keyhole, Vapor Plume, and Weld Pool Dynamics in Laser Welding including the Ambient Pressure Effect. Optics and Lasers in Engineering, 74, 47-58.
- Chongbunwatana, K. (2014) Simulation of Vapour Keyhole and Weld Pool Dynamics during Laser Beam Welding. Production Engineering, 8, 499-511. https://doi.org/10.1007/s11740-014-0555-x
- Abderrazak, K., Bannour, S., Mhiri, H., Lepalec, G. and Autric, M. (2009) Numerical and Experimental Study of Molten Pool Formation during Continuous Laser Welding of AZ91 Magnesium Alloy. Computational Materials Science, 44, 858-866. https://doi.org/10.1016/j.commatsci.2008.06.002
- Shanmugam, N.S., Buvanashekaran, G. and Sankaranarayanasamy, K. (2010) Experimental Investigation and Finite Element Simulation of Laser Beam Welding of AISI 304 Stainless Steel Sheet. Experimental Techniques, 34, 25-36. https://doi.org/10.1111/j.1747-1567.2009.00552.x
- Koo, B.S. (2013) Simulation of Melt Penetration and Fluid Flow Behavior during Laser Welding. Ph.D. Thesis, Lehigh University, Ann Arbor.