A Novel and Simple Route to Synthesis Nanocrystalline Titanium Carbide Via the Reaction of Titanium Dioxide and Different Carbon Source
- 1
- 2
- 3
- 4
- 5
Abstract
A novel and simple route for synthesizing nanocrystalline ceramic powders in molten salt was introduced in the paper. Titanium carbide (TiC) was prepared via the reaction of metallic magnesium powders with titanium dioxide (TiO<sub>2</sub>), carbon source and molten salt in an autoclave at 650°C. Carbon source (oxalic acid and citric acid) in this paper was stable, low toxic and cheap. X-ray powder diffraction (XRD) patterns indicated that the products were cubic TiC. Scanning electron microscopy (SEM) images showed that the samples consisted of particles with an average size of 200 nm and 100 nm in diameter, respectively. Energy Dispersive Spectrometer (EDS) analysis of the samples suggested the products contained carbon and titanium elements. The product was also studied by the thermogravimetric analysis (TGA). It had good thermal stability and oxidation resistance below 350°C in air.
- E. K. Stroms, “The Refractory Carbides, Refractory Ma- terials Series,” Academic Press, New York, 1967.
- L. E. Toth, “Transition Metal Carbides and Nitrides,” Academic Press, New York, 1971.
- H. O. Pierson. “Handbook of Refractory Carbides and Nitrides,” Noyes Publications, Park Ridge, 1996.
- M. Nagai, T. Miyao and T. Tuboi, “Hydrodesulfurization of Dibenzothiophene on Alumina-Supported Molybde- num Nitride,” Catalysis Letters, Vol. 18, No. 1-2, 1993, pp. 9-14. doi:10.1007/BF00769493
- J. J. Gangler, “Some Physical Properties of Eight Re- fractory Oxides and Carbides,” Journal of the American Ceramic Society, Vol. 33, No. 12, 1950, pp. 367-374. doi:10.1111/j.1151-2916.1950.tb14155.x
- Y. Shin, X. S. Li, C. Wang, J. R. Coleman and G. R. Exarhos, “Synthesis of Hierarchical Titanium Carbide from Titania-Coated Cellulose Paper,” Advanced Mate- rials, Vol. 16, No. 14, 2004, pp. 1212-1215. doi:10.1002/adma.200306661
- G. Yasuo, F. Kensaku, K. Mikio, O. Yutaka, N. Masanobu and A. Kensuke, “Synthesis of Titanium Carbide from a Composite of TiO2, Nanoparticles/Methyl Cellulose by Carbothermal Reduction,” Material Research Bulletin, Vol. 36, No. 13-14, 2001, pp. 2263-2275. doi:10.1016/S0025-5408(01)00713-9
- P. Huber, D. Manova, S. Mandl and B. Rauschenbach, “Formation of TiN, TiC and TiCN by Metal Plasma Im- mersion Ion Implantation and Deposition,” Surface and Coatings Technology, Vol. 174-175, 2003, pp. 1243-1247. doi:10.1016/S0257-8972(03)00458-4
- S. C Tjong and Z. Y. Ma, “Microstructural and Mecha- nical Characteristics of in Situ Metal Matrix Composites,” Materials Science and Engineering: R: Reports, Vol. 29, No. 3-4, 2000, pp. 49-113. doi:10.1016/S0927-796X(00)00024-3
- N. Durlu, “Titanium Carbide Based Composites for High- temperature Applications,” Journal of the European Ce- ramic Society, Vol. 19, No. 13-14, 1999, pp. 2415-2419. doi:10.1016/S0955-2219(99)00101-6
- P. Ettmayer, H. Kolaska, W. Lengauer and K. Dreyer, “Ti(C,N)––Metallurgy and Properties,” International Jour- nal of Refractory Metals and Hard Materials, Vol. 13, No. 6, 1995, pp. 343-351. doi:10.1016/0263-4368(95)00027-G
- R. Koc and J. S. Folmer, “Carbothermal Synthesis of Titanium Carbide Using Ultrafine Titania Powders,” Jour- nal of Materials Science, Vol. 32, No. 12, 1997, pp. 3101- 3111. doi:10.1023/A:1018634214088
- N. A. Hassine, J. G. P. Binner and T. E. Cross, “Synthesis of Refractory Metal Carbide Powders via Microwave Carbothermal Reduction,” International Journal of Re- fractory Metals and Hard Materials, Vol. 13, No. 6, 1995, pp. 353-358. doi:10.1016/0263-4368(95)00035-H