Slurry parameters were controlled prior to spray-drying to visualize and govern an understanding of which parameters govern hollow coring and granule morphology during spray-drying. An aqueous alumina using a polyvinyl alcohol binder (PVA) system was analyzed and granules were processed by altering the slurry specific gravity and viscosity value prior to spray-drying. Spray-dried granules were uniaxial dry-pressed at varying moisture contents to show the plasticizing effects of moisture during compaction. A novel characterization method using a field emission electron microscope (FESEM) was implemented to image the green microstructures of the granules and compacted samples. Slurries with a higher specific gravity and viscosity resulted in denser granules with spherical shapes. Viscosity affected the binder segregation during the spray-drying process. Granules stored at higher moisture contents resulted in denser compacts with fewer intergranular pores and cracks along granule boundaries. Using a FESEM resulted in higher resolution for green microstructural characterization.
Uematsu, K., Kim, J. Y., Miyashita, M., Uchida, N. and Saito, K. (1990) Direct Observation of Internal Structure in Spray-Dried Alumina Granules. Journal of the American Ceramic Society, 73, 2555-2557. https://doi.org/10.1111/j.1151-2916.1990.tb07635.x
Zhang, Y., Uchida, N. and Uematsu, K. (1995) Direct Observation of Non-Uniform Distribution of PVA Binder in Alumina Green Body. Journal of Materials Science, 30, 1357-1360. https://doi.org/10.1007/BF00356144
Uematsu, K. (1996) Immersion Microscopy for Detailed Characterization of Defects in Ceramic Powders and Green Bodies. Powder Technology, 88, 291-298. https://doi.org/10.1016/S0032-5910(96)03133-6
Zhang, Y., Tang, X., Uchida, N. and Uematsu, K. (1998) Binder Surface Segregation during Spray Drying of Ceramic Slurry. Journal of Materials Research, 13, 1881-1887. https://doi.org/10.1557/JMR.1998.0267
Hotta, T., Nakahira, K., Naito, M., Shinohara, N., Okumiya, M. and Uematsu, K. (1999) Origin of Strength Change in Ceramics Associated with the Alteration of Spray Dryer. Journal of materials research, 14, 2974-2979. https://doi.org/10.1557/JMR.1999.0398
Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu, K. (1999) Formation Mechanisms of Processing Defects and Their Relevance to the Strength in Alumina Ceramics Made by Powder Compaction Process. Journal of Materials Science, 34, 4271-4277. https://doi.org/10.1023/A:1004611105281
Shinohara, N., Okumiya, M., Hotta, T., Nakahira, K., Naito, M. and Uematsu K. (1999) Seasonal Variation of Microstructure and Sintered Strength of Dry-Pressed Alumina. Journal of the American Ceramic Society, 82, 3441-3446. https://doi.org/10.1111/j.1151-2916.1999.tb02262.x
Uematsu, K., Uchida, N., Kato, Z., Tanaka, S., Hotta, T. and Naito M. (2001) Infrared Microscopy for Examination of Structure in Spray-Dried Granules and Compacts. Journal of the American Ceramic Society, 84, 254-256. https://doi.org/10.1111/j.1151-2916.2001.tb00646.x
Shinohara, N., Katori, S., Okumiya, M., Hotta, T., Nakahira, K., Naito, M., et al. (2002) Effect of Heat Treatment of Alumina Granules on the Compaction Behavior and Properties of Green and Sintered Bodies. Journal of the European Ceramic Society, 22, 2841-2848. https://doi.org/10.1016/S0955-2219(02)00059-6
Saito, Y., Nyumura, J., Zhang, Y., Tanaka, S., Uchida, N. and Uematsu, K. (2002) Kinetics of Property Change Associated with Atmospheric Humidity Changes in Alumina Powder Granules with PVA Binder. Journal of the European Ceramic Society, 22, 2835-2840. https://doi.org/10.1016/S0955-2219(02)00041-9
Saito, Y., Nyumura, J., Fukai, K., Zhang, Y., Uchida, N. and Uematsu, K. (2002) Moisture Diffusion in Alumina Green Compact Containing Polyvinyl Alcohol Binder. Journal of the Ceramic Society of Japan, 110, 237-242. https://doi.org/10.2109/jcersj.110.237
Tanaka, S., Pin, C.C. and Uematsu, K. (2006) Effect of Organic Binder Segregation on Sintered Strength of DRY-Pressed Alumina. Journal of the American Ceramic Society, 89, 1903-1907. https://doi.org/10.1111/j.1551-2916.2006.01057.x
Tanaka, S., Chia-Pin, C., Kato, Z. and Uematsu, K. (2007) Effect of Internal Binder on Microstructure in Compacts Made from Granules. Journal of the European Ceramic Society, 27, 873-877. https://doi.org/10.1016/j.jeurceramsoc.2006.04.038
Imran, Z.M., Tanaka, S. and Uematsu, K. (2009) Effect of Polyacrylic Acid (PAA) Binder System on Particle Orientation during Dry-Pressing. Powder Technology, 196, 133-138. https://doi.org/10.1016/j.powtec.2009.07.003
Zainuddin, M.I., Tanaka, S., Furushima, R. and Uematsu, K. (2010) Correlation between Slurry Properties and Structures and Properties of Granules. Journal of the European Ceramic Society, 30, 3291-3296. https://doi.org/10.1016/j.jeurceramsoc.2010.07.004
Uematsu, K., Miyashita, M., Kim, J.Y. and Uchida, N. (1992) Direct Study of the Behavior of Flaw-Forming Defect in Sintering. Journal of the American Ceramic Society, 75, 1016-1018. https://doi.org/10.1111/j.1151-2916.1992.tb04178.x
Hondo, T., Kato, Z., Yasuda, K., Wakai, F. and Tanaka, S. (2016) Coarse Pore Evolution in Dry-Pressed Alumina Ceramics during Sintering. Advanced Powder Technology, 27, 1006-1012. https://doi.org/10.1016/j.apt.2016.04.009
Saito, Y., Tanaka, S. and Uchida, N. (2002) CLSM for Ceramic Green Microstructure. American Ceramic Society Bulletin, 81, 35-38.
Saito, Y., Tanaka, S., Uchida, N. and Uematsu, K. (2001) Direct Evidence for Low-Density Regions in Compacted Spray-Dried Powders. Journal of the American Ceramic Society, 84, 2454-2456. https://doi.org/10.1111/j.1151-2916.2001.tb01035.x
Tanaka, S. (2006) Design of Packing Structures through Direct Characterization of Ceramics Green Bodies. Journal of the Ceramic Society of Japan, 114, 141-146. https://doi.org/10.2109/jcersj.114.141
Tanaka, S., Kato, Z., Uchida, N. and Uematsu, K. (2003) Direct Observation of Aggregates and Agglomerates in Alumina Granules. Powder Technology, 129, 153-155. https://doi.org/10.1016/S0032-5910(02)00226-7
Kato, Z., Tanaka, S., Uchida, N. and Uematsu, K. (2006) Observation of the Granule Packing Structure Using a Confocal Laser-Scanning Microscope. Journal of the European Ceramic Society, 26, 683-687. https://doi.org/10.1016/j.jeurceramsoc.2005.07.005
Tanaka, S., Kuwano, Y. and Uematsu, K. (2007) Packing Structure of Particles in a Green Compact and Its Influence on Sintering Deformation. Journal of the American Ceramic Society, 90, 3717-3719. https://doi.org/10.1111/j.1551-2916.2007.01975.x
Hondo, T., Kato, Z. and Tanaka, S. (2014) Enhancing the Contrast of Low-Density Packing Regions in Images of Ceramic Powder Compacts Using a Contrast Agent for Micro-X-Ray Computed Tomography. Journal of the Ceramic Society of Japan, 122, 574-576. https://doi.org/10.2109/jcersj2.122.574
Deis, T.A. and Lannutti, J.J. (1998) X-Ray Computed Tomography for Evaluation of Density Gradient Formation during the Compaction of Spray-Dried Granules. Journal of the American Ceramic Society, 81, 1237-1247. https://doi.org/10.1111/j.1151-2916.1998.tb02474.x
Cottrino, S., Jorand, Y., Maire, E. and Adrien, J. (2013) Characterization by X-Ray Tomography of Granulated Alumina Powder during in Situ Die Compaction. Materials Characterization, 81, 111-123. https://doi.org/10.1016/j.matchar.2013.04.004
Lu, P., Lannutti, J.J., Klobes, P. and Meyer, K. (2000) X-Ray Computed Tomography and Mercury Porosimetry for Evaluation of Density Evolution and Porosity Distribution. Journal of the American Ceramic Society, 83, 518-522. https://doi.org/10.1111/j.1151-2916.2000.tb01227.x
Ku, N. (2015) Evaluation of the Behavior of Ceramic Powders under Mechanical Vibration and Its Effect on the Mechanics of Auto-Granulation. Ph.D. Thesis, Rutgers University, New Brunswick.
Alazzawi, M.K., Murali, S. and Haber, R.A. (2017) Visualizing the Effect of Extrusion Velocity on the Spatial Variation of Porosity in a Titanium Dioxide/Binder System. Materials Sciences and Applications, 8, 933. https://doi.org/10.4236/msa.2017.813068
Promdej, C., Areeraksakul, S., Pavarajarn, V., Shigetaka, W., Wasanapiarnpong, T. and Charinpanitkul, T. (2008) Preparation of Translucent Alumina Ceramic Specimen Using Slip Casting Method. Journal of the Ceramic Society of Japan, 116, 409-413. https://doi.org/10.2109/jcersj2.116.409
Yu, B., Feng, Y.J., Wohn, L.S., Huang, C., Li, Y.F. and Jia, Z. (2011) Spray-Drying of Alumina Powder for APS: Effect of Slurry Properties and Drying Conditions upon Particle Size and Morphology of Feedstock. Bulletin of Materials Science, 34, 1653-1661. https://doi.org/10.1007/s12034-011-0373-0