On the Vickers Microhardness and Wide-Angle X-Ray Line Width for Characterization of the Oxidative Stability of Poly(ethylene-co-propylene) Pipes
- 1 Laboratory on Structure and Properties of Polymers, Faculty of Chemistry and Pharmacy, University of Sofia, Sofia, Bulgaria
Abstract
The purpose of the current study is to evaluate the ageing of poly(ethylene-co-propylene) fittings produced by several manufacturers. The fittings were aged for varying times as follows: 0, 2, 13, 23, 45, 106, 225 and 391 days at 100 ° C. In a previous paper, the oxidation induction time (OItime) and oxidation induction temperature (OItemp) were evaluated with respect to every single step of the ageing process [1] . Here, the Vickers microhardness and wide-angle X-ray line width were used for characterization of the oxidative stability of poly(ethylene-co-propylene) pipes. Both the Vickers microhardness and wide-angle X-ray line width as evaluated from a certain reflex of the diffractogram generally increase with ageing for most samples. The higher microhardness is most likely related to higher fragility of the pipes. The increase of the X-ray line width with ageing indirectly proves that reducing the crystallite size as well as increase of the crystallite defectiveness take place.
- Apostolov, A.A. (2018) On the Oxidation Induction Time and Oxidation Induction Temperature for Characterization of the Oxidative Stability of Poly(Ethylene-Co-Propylene) Pipes. Proceeding of the Bulgarian Academy of Sciences, 71, 38-45.
- Krumova, M., Flores, A., Balta-Calleja, F.J. and Fakirov S. (2002) Elastic Properties of Oriented Polymers, Blends and Reinforced Composites Using the Microindentation Technique. Colloid and Polymer Science, 280, 591-598. https://doi.org/10.1007/s00396-001-0646-z
- Focke, F.W. and van der Westhuizen, I. (2010) Oxidation Induction Time and Oxidation Induction Temperature of Polyethylene in Air. Journal of Thermal Analysis and Calorimetry, 99, 285-293. https://doi.org/10.1007/s10973-009-0097-1
- Krebs, C., Avondet, M-A. and Leu, K.W. (1998) Long Term Behaviour of Thermoplastics—Ageing Behaviour and Chemical Resistance. Hanser-Verlag, Munich.
- Balta Calleja, F. and Fakirov, S. (2000) Microhardness of Polymers. Cambridge University Press, Cambridge. www.cambridge.org/9780521642187
- Wening, W. and Schoeller, T. (1991) Zusammenhange zwischen mechanischem Verhalten und Morphologie von eigenfaserverstarkten Poly(propylen)/Poly(l-buten)-Blends, kristallisiert aus der hochorientierten Schmelze. Angewandte Makromolekulare Chemie, 192, 183-197. https://doi.org/10.1002/apmc.1991.051920115
- Martinez-Salazar, J., Garcia Tijego, J.M. and Balta-Calleja, F.J. (1988) Microstructural Changes in Polyethylene-Polypropylene Blends as Revealed by Microhardness. Journal of Materials Science, 23, 862-866. https://doi.org/10.1007/BF01153980
- Fischer E.W. and Fakirov, S. (1976) Structure and Properties of Polyethyleneterephthalate Crystallized by Annealing in the Highly Oriented State. Part 1 Morphological Structure as Revealed by Small-Angle X-Ray Scattering. Journal of Materials Science, 11, 1041-1065. https://doi.org/10.1007/BF02396639
- Weon, J. (2009) Effects of Thermal Ageing on Mechanical and Thermal Behaviors of Linear Low Density Polyethylene Pipe. Polymer Degradation and Stability, 95, 14-20. https://doi.org/10.1016/j.polymdegradstab.2009.10.016