Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material…
Qingwang Liu, Zhe Zhang, Zhenzhong Fan, Zhenzhong Fan, Jigang Wang
The low-permeability oil and gas resources of our country are quite common and abundant. Their reserve has accounted for one-fifth of total oil reserves of our country, and their yield has constituted the important part of national petroleum annual yield, but…
Kenta Miura, Yuki Arai, Kazusa Kano, Osamu Hanaizumi
An erbium and ytterbium co-doped tantalum-oxide (Ta 2 O 5 :Er, Yb) thin film was fabricated using a simple co-sputtering method for the first time, and its photoluminescence (PL) spectrum was evaluated. Energy transfers between Er 3+ and Yb <sup>3+</sup> in t…
Sadia Khanam, A. K. M. Zakaria, M. H. Ahsan, T. K. Datta, S. Aktar, S. I. Liba, S. Hossain, A. K. Das, I. Kamal, S. M. Yunus, D. K. Saha, S.-G. Eriksson
The polycrystalline spinel oxides Ni<SUB>X</SUB> Co<SUB> 1-X </SUB> Fe <SUB>2</SUB> O <SUB>4</SUB> with composition x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0 were prepared by conventional solid state ceramic sintering technique in air at 1300°C. X-ray diffraction e…
Hiroaki Murase, Shinichi Kawasaki, Toshimichi Kitaoka, Jouji Furukawa, Hirofumi Ueda, Hiroyuki Nishimura, Kazushi Yamada
The fusion strength of electrofusion joints using the polyethylene (PE) pipe connection greatly depends on the amount of sand which adheres to the interface by wind and so on, because there is no flow of melted resin at the fusion interface on electrofusion j…
Muna Musa Abbas, Saad Frhan Oboudi, Nadein Qahtan Raoof
One and multi-step solid state reaction methods were used to prepare a high temperature superconductor with a nominal composition Bi 2-x Li x Pb 0.3 Sr 2 Ca 2 Cu 3 O 10+δ for ( 0 ≤ x ≤ 0 .5). T he effect o f preparation conditions and substituting Li on Bi si…
Go Sajiki, Yasuhiko Benino, Tokuro Nanba, Hiroshi Okano
Zinc oxide (ZnO) and niobium oxide (NbO<SUB>x</SUB>) with a nano-island structure were deposited by a sputtering method on Al-coated glass substrates. Cells with a (ZnO or NbO <SUB>x</SUB> )/Al/glass|KNO <SUB>3</SUB> aq.|Al/ glass structure were assembled, an…
Hussein A. Ahmed, Alan S. Said Ahmad, Ari A. Mohammed
The present work measured the bulk etch rate (V <SUB>B</SUB> ) of solid state nuclear track detector by taking the diameter time measurement of alpha particle in CR-39 detector. The values of the track diameter have been found by using TRACK-TEST program from…
Zhaofang Du, Liling Zhang, Yunhui Xu
The oxidized bamboo pulp fiber yarns were prepared by the HNO<SUB>3</SUB> /H <SUB>3</SUB> PO <SUB>4</SUB> -NaNO <SUB>2</SUB> oxidation system. The effects of the oxidation concentration and reaction time on the weight loss, the carboxyl content and the breaki…
Laishram Robindro Singh
Development of advanced display and lighting technology such as field emission displays and plasma display panels requires phosphor which has a high efficiency and low degradation. Particle sizes and the locations of dopants in the hosts take an important rol…
Kenta Miura, Takumi Osawa, Yuya Yokota, Tetsuhito Suzuki, Osamu Hanaizumi
We prepared thulium and cerium co-doped tantalum-oxide (Ta 2 O 5 :Tm, Ce) thin films by radiofrequency co-sputtering of Tm 2 O 3 and CeO 2 pellets on a Ta 2 O 5 disc for the first time, and photoluminescence (PL) properties of the films annealed at 700°C, 800…
No articles in this issue.
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).