Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material…
Xiaoli Li, Long Cheng, Long Cheng, Yalei Wang, Yan Gao, Zhiyong Quan, Xiufang Qin, Harry J. Blythe, Gillian A. Gehring, Xiaohong Xu
Co-ZnO films were prepared on oxidised silicon by magnetron sputtering at room temperature both with and without a ZnO buffer-layer. The Co-ZnO films consisted of Co particles dispersed in a semiconductor matrix. The combination of a Co-ZnO layer and a ZnO bu…
Fusheng Ma, Yuping Wu, Baoyu Zong
The complex permeability of the artificial spin ice array at different magnetic states is calculated using the micromagnetic simulation method. It is observed that the permeability spectra are dependent on the magnetization distributions of the array. The dep…
Shigeo Fujii, Koji Wakamatsu, Hiroshi Satoh, Setsuo Yamamoto
The sintering characteristics of hexagonal Co 2 -Y-type ferrite, Ba 2 Co 2 Fe 12 O 22 , with the addition of 0.6 wt% CuO, were studied in order to allow for preparation in air, as opposed to the convention ally recommended O 2 , for industrial production. The…
Jeannot Mane Mane, François Le Normand, Rolant Eba Medjo, Costel Sorin Cojocaru, Ovidiu Ersen, Antoine Senger, Carine Laffon, Bridinette Thiodjio Sendja, César Mbane Biouele, Germain Hubert Ben-Bolie, Pierre Owono Ateba, Philippe Parent, 1 1
X-Ray Absorption Spectroscopy (XAS) on the carbon K edge of carbon nanostructures (nanotubes, nanofibers, nanowalls) is reported here. They are grown on plain SiO2 (8 nm thick)/Si(100) sub strates by a Plasma and Hot Filaments-enhanced Catalytic Chemical Vapo…
Samia Mahouche-Chergui, Yves Grohens, Eric Balnois, Bénédicte Lebeau, Yves Scudeller
The present work is focused on better understanding of the interfacial interactions of SBA-15 mesoporous silica particles with flax fibers. In order to overcome the inherent complexity of flax fiber surface composition we have prepared model polysaccharide su…
Ruey Shan Chen, Mohd Hafizuddin Ab Ghani, Mohd Nazry Salleh, Sahrim Ahmad, Sinyee Gan
Polymer blends based on recycled high density polyethylene (rHDPE) and recycled poly(ethylene terephthalate) (rPET) with and without ethylene-glycidyl methacrylate copolymer (E-GMA) as compatibilizer were fabricated in a co-rotating twin screw extruder. The e…
Mohamed Ali Ahmed, Kasim El-Sayed Rady, Kamel Mohamed El-Shokrofy, Ahmed Abo Arais, Mohamed Said Shams
The effect of Zn 2+ ions on the microstructure and electrical properties of Mn 1-x Zn x Fe 2 O 4 (0.0 ≤ x ≤ 0.5 in steps of 0.1) through a solid state reaction has been investigated. The structural properties have been investigated using X-ray diffraction (XR…
Cynthia D’Avila Carvalho Erbetta, Getúlio F. Manoel, Ana Paula Lelis Rodrigues Oliveira, Maria Elisa Scarpelli Ribeiro e Silva, Roberto Fernando Souza Freitas, Ricardo Geraldo Sousa
In the present work, rheological properties of HDPE samples were measured at temperatures of 150°C, 190°C and 230°C. It was shown, by oscillatory tests, at low frequencies, that, for temperatures of 150°C and 190°C, there was a predominance of the viscous beh…
Matthew Edwards, Stephen Egarievwe, Afef Janen, Tatiana Kukhtarev, Jemilia Polius, John Corda
Pure and doped Polyvinylidene difluoride (PVDF) films, for the detection of infrared radiation, have been well documented using the mechanism of pyroelectricity. Alternatively, the electrical properties of films made from Polyvinyl Alcohol (PVA) have received…
Carla Costa, M. Sofia Ribeiro, Nuno Brito
This paper presents research on transport properties and alkali-silica reaction (ASR) susceptibility of mortars containing a pozzolanic waste generated in the fluid catalytic cracking (wFCC) unit by the Portuguese oil-refinery. For this purpose, two series of…
No articles in this issue.
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).