ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material…
Chantale Njiomou Djangang, Elie Kamseu, Antoine Elimbi, Gisèle Laure Lecomte, Philippe Blanchart, 1 1
In this paper, a glass powder from waste containers was mixed (10 - 40 wt.%) with a kaolinitic sandy clay from Cameroon to elaborate net-shape ceramics, fired at 1100 ° C. The sintering behavior was from dilatometry and thermo gravimetric analyses together wi…
A. A. Apostolov, S. Djoumaliisky
The oxidation time and oxidation temperature of a total of 20 specimens with unknown pre-history from various manufacturers of polyethylene and poly(ethylene-co-propylene) are determined. The specimens are in the form of fittings used in piping. The specimens…
Muhammad Rifai, Hiroyuki Miyamoto, Hiroshi Fujiwara
The effect of the deformation route on the microstructure, and the mechanical and electrochemical properties of low CN Fe-20%Cr alloy by equal channel angular pressing, have been investigated focusing on the anisotropy of the microstructure. This alloy was pr…
Inessa Yu. Shimkevich, Alexander L. Shimkevich
The results of molecular-dynamics (MD) simulation are obtained for structural and thermodynamic properties of the molten system, Na 1- x Pb x ( x ≤ 0.1), at 698 K in the model of nearly free electronic gas (NFE approximation). The all numerical experiments ar…
Nobuyuki Imamura, Hiroki Sakamoto, Yuji Higuchi, Hiroyuki Yamamoto, Shinichi Kawasaki, Kazushi Yamada, Hiroyuki Nishimura, Takahiro Nishino
Recycled PET (R-PET) is well known to exhibit brittle behavior in the presence of notches and indicated the low heat distortion temperature. In addition, it is hard to prevent some impurities such as cap or label of the bottle that mixed into R-PET during the…
Milan Melník, Peter Mikuš
This review covers structural parameters of almost two thousand monomeric Pt coordination complexes. The Pt is found in the oxidation states zero, +1, +2, +3 and +4, from which oxidation state +2 by far prevails. There is a wide variety of donor atom ligands…
Eguiberto Galego, Marilene Morelli Serna, Rubens Nunes de Faria Junior
This paper presents the results of investigations carried out with Pr-based magnetic powders. The magnetically hard powders were produced from homogenised alloys using a high temperature hydrogen pulverization process. Alloys and powders were investigated by…
H. Sakly, H. Ben Ouada, N. Jaffrezic Renault
The aim of this work was to study the electrochemical behavior of gold electrode which was modified with p-tert-butylcalix[6]arene membrane and this in the presence of different nickel ions based concentrations in order to form a nickel electrochemical sensor…
Safdar Habibi, Babak Jaleh, Amir Namdarmanesh, Mojtaba Shamlo
In this paper binary alloy of Al-Cu with composition Al (100-x) Cu x , (x = 10, 15, 20) is prepared by thermal evaporation method. The prepared samples are annealed at different temperatures and investigated by XRD and microhardness method. XRD has been used…
Yi-Fen Chiang, Yu-Chou Chao
In this study, the azo red dyes derived from p-n-alkyl aniline by the introduction of different alkyl groups having high solubility in dodecane were synthesized. Results indicated that the elementary properties of red oil inks were 1) non-polarity; 2) low vis…
No articles in this issue.
Materials Sciences and Applications (MSA) is an international journal dedicated to the latest advancements in materials. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of material… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).