Modeling the Mechanical Properties of Clay Powder Filled Recycled Low Density Polyethylene Composites
- 1 Department of Chemistry, Federal University of Technology, Owerri, Nigeria
- 2 Department of Polymer and Textile Engineering, Federal University of Technology, Owerri, Nigeria
- 3 Department of Materials and Metallurgical Engineering, Federal University of Technology, Owerri, Nigeria
Abstract
This study modeled some mechanical properties of clay powder filled recycled low-density polyethylene, rLDPE (rLDPE composite). The rLDPE is commonly referred to as used sachet water bags. The clay powder (filler) was obtained by sun-drying, grinding, and sieving. Two particle sizes of clay powder were used: − 90 μm and − 425 μm to represent the passing sizes at different clay powder contents of 5, 10, 15 and 20 wt% which were thoroughly mixed with the recycled low-density polyethylene in an injection molding machine at 173 ° C. The results showed that the tensile strength, tensile modulus, hardness, flexural strength, fatigue strength and hardness increased with increase in clay powder contents. However, there were decreases in strain-at-breakage and shear strength as clay powder content increased. Model equations showed that smaller particle size enhanced the mechanical properties and equations generated can be used to predict the properties of composites at predetermined clay contents. Standard deviations obtained for the various mechanical properties show that the model, in most cases had the lowest degree of scatter (dispersion) than those of − 90 μm and − 425 μm. Hence, these models are suitable to predict outcomes of the properties of the clay filled recycled low-density polyethylene composites.
- Ali, D.S.M., Alemzadeh, I., Reza, D.S.M. and Vosoughi, M. (2011) Studies on the Oxygen Barrier and Mechanical Properties of Low-Density Polyethylene/Organoclay Nanocomposite Films in the Presence of Ethylene Vinyl Acetate Copolymer as a New Type of Compatibilizer. Materials and Design, 32, 1806-1813. https://doi.org/10.1016/j.matdes.2010.12.028
- Beylergil, B., Tanoğlu, M. and Aktaş, E. (2017) Enhancement of Interlaminar Fracture Toughness of Carbon Fiber-Epoxy Composites Using Polyamide-6,6 Electrospun Nanofibers. Journal of Applied Polymer Science, 134, 45244. https://doi.org/10.1002/app.v134.35
- Ishida, H., Campbell, S. and Blackwell, J. (2000) General Approach to Nanocomposite Preparation. Chemistry of Materials, 12, 1260-1267. https://doi.org/10.1021/cm990479y
- Lama, C.K., Cheunga, H.Y., Laua, K.T., Zhoua, L.M., Hob, M.W. and Huib, D. (2005) Cluster Size Effect in Hardness of Nanoclay/Epoxy Composites. Composites: Part B, 36, 263-269. https://doi.org/10.1016/j.compositesb.2004.09.006
- Gopakumar, T.G., Lee, J.A., Kontopoulou, M. and Parent, J.S. (2002) Influence of Clay Exfoliation on the Physical Properties of Montmorillonite/Polyethylene Composites. Polymer, 43, 5483-5491. https://doi.org/10.1016/S0032-3861(02)00403-2
- Loganathan, R., Eunkyoung, S. and Behnam, P. (2011) Structure and Tensile Properties of Nanoclay-Polypropylene. Journal of Applied Polymer Science, 121, 410-419. https://doi.org/10.1002/app.33619
- Jo, C., Fu, J. and Naguib, H.E. (2006) Constitutive Modeling for Intercalated PMMA/Clay Nanocomposite Foams. Polymer Engineering & Science, 46, 1787. https://doi.org/10.1002/pen.20656
- Shia, D., Hui, C.Y., Burnside, S.D. and Giannelis, E.P. (1998) An Interface Model for the Prediction of Young’s Modulus of Layered Silicate-Elastomer Nanocomposites. Polymer Composite, 19, 608. https://doi.org/10.1002/pc.10134
- Arulmurugan, S. and Ventateshwaran, N. (2016) Vibration Analysis of Nanoclay Filled Natural Fibre Composites. Polymers and Polymer Composites, 24, 507-516. https://doi.org/10.1177/096739111602400709
- Fornes, T.D. and Paul, D.R. (2003) Modeling Properties of Nylon 6/Clay Nanocomposites Using Composite Theories. Polymer, 44, 4993. https://doi.org/10.1016/S0032-3861(03)00471-3
- Onuegbu, G.C. and Madufor, I.C. (2012) Effect of Filler Loadings on the End-Use Properties of Maize Tassel Filled High Density Polyethylene. International Research Journal in Engineering, Science and Technology, 9, 2.