Surface Modifications of Cellulose Acetate Film for the Application of Face Shield
- 1 Thomas Jefferson High School for Science and Technology, Alexandria, Virginia, USA
Abstract
During the COVID-19 pandemic, personal protective equipment (PPE) has become crucial to protect humans from the transmission of the virus. The face shield is a simple and effective PPE to prevent the viral and bacterial contact. Since COVID-19 is known to be spread via respiratory droplets, the face shield has become increasingly important PPE. However, the common materials used in face shields are synthetic, environmentally unfriendly polymers, which cause an accumulation of plastic waste once disposed. Cellulose acetate (CA) can be used as an alternative for face shield films due to its ability to decompose safely in the environment; however, pristine CA cannot serve as an effective face shield due to its low hydrophobicity. In this research, the somewhat hydrophilic character of CA with a water contact angle of 55 ° is experimented on: hexamethyldisilazane (HMDS) is utilized to improve the hydrophobicity of CA up to a water contact angle of 77 ° . After the oxidization of the surface of CA via oxygen plasma, implementing HMDS shows a significant increase in hydrophobicity of the film.
- Total Case Numbers and Death in the U.S. http://news.google.com/
- News Articles from CNN and ABC News. www.cnn.com/2020/05/04/world/coronavirus-plastic-waste-pollution-intl/index.html, abcnews.go.com/Politics/covid-19-pandemic-concern-plastic-pollution-environmental-headlines/story?id=71698898
- Ach, A. (1993) Biodegradable Plastics Based on Cellulose-Acetate. Journal of Macromolecular Science-Pure and Applied Chemistry, A30, 733-740. https://doi.org/10.1080/10601329308021259
- Siddiquie, R.Y., Agrawal, A. and Joshi, S.S. (2020) Surface Alterations to Impart Antiviral Properties to Combat COVID-19 Transmission. Transactions of the Indian National Academy of Engineering; 5, 343-347. https://doi.org/10.1007/s41403-020-00096-9
- Schneider, C.A., Rasband, W.S. and Eliceiri, K.W. (1997-2018). https://imagej.nih.gov/ij/
- Wu, W., Wu, J., Kim, J.H. and Lee, N.Y. (2015) Instantaneous Room Temperature Bonding of a Wide Range of Non-Silicon Substrates with Poly(Dimethylsiloxane) (PDMS) Elastomer Mediated by a Mercaptosilane. Lab on a Chip, 15, 2819-2825. https://doi.org/10.1039/C5LC00285K
- Wu, J. and Lee, N.Y. (2014) One-Step Surface Modification for Irreversible Bonding of Various Plastics with a Poly(Dimethylsiloxane) Elastomer at Room Temperature. Lab on a Chip, 14, 1564-1571. https://doi.org/10.1039/c3lc51324f
- Tang, L. and Lee, N.Y. (2010) A Facile Route for Irreversible Bonding of Plastic-PDMS Hybrid Microdevices at Room Temperature. Lab on a Chip, 10, 1274-1280. https://doi.org/10.1039/b924753j
- Law, K.Y. (2014) Definitions for Hydrophilicity, Hydrophobicity, and Superhydrophobicity: Getting the Basics Right. Journal of Physical Chemistry Letters, 5, 686-688. https://doi.org/10.1021/jz402762h
- Hetemi, D. and Pinson, J. (2017) Surface Functionalisation of Polymers. Chemical Society Reviews, 46, 5701-5713. https://doi.org/10.1039/C7CS00150A
- Dobos, A.M., Stoica, I., Olaru, N., Olaru, L., Ioanid, E.G. and Ioan, S. (2012) Surface Properties and Biocompatibility of Cellulose Acetates. Journal of Applied Polymer Science, 125, 2521-2528. https://doi.org/10.1002/app.36361
- Commercial Website. http://microchemicals.com/products/adhesion_promotion/hmds.html