Recent Advances on Preparation Method of Ti-Based Hydrogen Storage Alloy — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Recent Advances on Preparation Method of Ti-Based Hydrogen Storage Alloy
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
,
Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
1 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
2 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
3 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
4 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
5 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
6 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
7 Guangxi Key Laboratory of Information Materials, School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin, China
Ti-based hydrogen storage alloy is one of the most common solid-state hydrogen storage materials due to its high hydrogen absorption capacity, low dehydrogenation temperature and rich resources. This paper mainly presents the influence of several different preparation methods of Ti-based hydrogen storage alloys on the hydrogen storage performance including traditional preparation methods (smelting, rapid quenching and mechanical alloying) and novel methods by plastic deformation (cold rolling, equal channel angular pressing and high-pressure torsion). The microstructure analysis and hydrogen storage properties of Ti-based alloy are summarized thoroughly corresponding with the preparation processes mentioned above. It was found that slight introduction of lattice defects including dislocation, grain boundary, sub-grain boundary and cracks by severe plastic deformation (SPD) was beneficial to improve the hydriding/dehydriding kinetic characteristic. However, the nonuniform composition and residual stress of the alloy may be caused by SPD, which is not conducive to the improvement of hydrogen storage capacity. In the future, it would be expected that new methods and technologies combined with dopant and modification are applied to Ti-based hydrogen storage alloys to make breakthroughs in practical application.
Wang, F., Li, R., Ding, C., Tang, W., Wang, Y., Xu, S., Yu, R. and Wu, Y. (2017) Recent Progress on the Hydrogen Storage Properties of ZrCo-Based Alloys Applied in International Thermonuclear Experimental Reactor (ITER). Progress in Natural Science: Materials International, 27, 58-65. https://doi.org/10.1016/j.pnsc.2016.12.018
Lin, H.J., Li, H.W., Shao, H., Lu, Y. and Asano, K. (2020) In Situ Measurement Technologies on Solid-State Hydrogen Storage Materials: A Review. Materials Today Energy, 17, Article ID: 100463. https://doi.org/10.1016/j.mtener.2020.100463
Kojima, Y. (2019) Hydrogen Storage Materials for Hydrogen and Energy Carriers. International Journal of Hydrogen Energy, 44, 18179-18192. https://doi.org/10.1016/j.ijhydene.2019.05.119
Rong, M., Wang, F., Wang, J., Wang, Z. and Zhou, H. (2017) Effect of Heat Treatment on Hydrogen Storage Properties and Thermal Stability of V68Ti20Cr12 Alloy. Progress in Natural Science: Materials International, 27, 543-549. https://doi.org/10.1016/j.pnsc.2017.08.012
Rusman, N.A.A. and Dahari, M. (2016) A Review on the Current Progress of Metal Hydrides Material for Solid-State Hydrogen Storage Applications. International Journal of Hydrogen Energy, 41, 12108-12126. https://doi.org/10.1016/j.ijhydene.2016.05.244
Sakintuna, B., Lamaridarkrim, F. and Hirscher, M. (2007) Metal Hydride Materials for Solid Hydrogen Storage: A review. International Journal of Hydrogen Energy, 32, 1121-1140. https://doi.org/10.1016/j.ijhydene.2006.11.022
2019) US DOE Funding Fuel Cell, Hydrogen Projects. Fuel Cells Bulletin, 2019, 13-14. https://doi.org/10.1016/S1464-2859(19)30391-8
Tarasov, B.P., Fursikov, P.V., Volodin, A.A., Bocharnikov, M.S., Shimkus, Y.Y., Kashin, A.M., Yartys, V.A., Chidziva, S., Pasupathi, S. and Lototskyy, M.V. (2020) Metal Hydride Hydrogen Storage and Compression Systems for Energy Storage Technologies. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2020.07.085
Boateng, E. and Chen, A. (2020) Recent Advances in Nanomaterial-Based Solid-State Hydrogen Storage. Materials Today Advances, 6, Article ID: 100022. https://doi.org/10.1016/j.mtadv.2019.100022
Ren, J., Musyoka, N.M., Langmi, H.W., Mathe, M. and Liao, S. (2017) Current Research Trends and Perspectives on Materials-Based Hydrogen Storage Solutions: A Critical Review. International Journal of Hydrogen Energy, 42, 289-311. https://doi.org/10.1016/j.ijhydene.2016.11.195
Pickering, L., Lototskyy, M.V., Wafeeq Davids, M., Sita, C. and Linkov, V. (2018) Induction Melted AB2-Type Metal Hydrides for Hydrogen Storage and Compression Applications. Materials Today: Proceedings, 5, 10470-10478. https://doi.org/10.1016/j.matpr.2017.12.378
Nei, J., Young, K., Salley, S.O. and Ng, K.Y.S. (2012) Effects of Annealing on Zr8Ni19X2 (X = Ni, Mg, Al, Sc, V, Mn, Co, Sn, La, and Hf): Hydrogen Storage and Electrochemical Properties. International Journal of Hydrogen Energy, 37, 8418-8427. https://doi.org/10.1016/j.ijhydene.2012.02.066
Kumar, S., Jain, A., Ichikawa, T., Kojima, Y. and Dey, G.K. (2017) Development of Vanadium Based Hydrogen Storage Material: A Review. Renewable and Sustainable Energy Reviews, 72, 791-800. https://doi.org/10.1016/j.rser.2017.01.063
Guo, X., Wang, S., Liu, X., Li, Z., Lü, F., Mi, J., Hao, L. and Jiang, L. (2011) Laves Phase Hydrogen Storage Alloys for Super-High-Pressure Metal Hydride Hydrogen Compressors. Rare Metals, 30, 227-231. https://doi.org/10.1007/s12598-011-0373-7
Zhang, Y., Wang, H., Zhai, T., Yang, T., Qi, Y. and Zhao, D. (2014) Hydrogen Storage Characteristics of the Nanocrystalline and Amorphous Mg-Nd-Ni-Cu-Based Alloys Prepared by Melt Spinning. International Journal of Hydrogen Energy, 39, 3790-3798. https://doi.org/10.1016/j.ijhydene.2013.12.139
Lv, W., Shi, Y., Deng, W., Yuan, J., Yan, Y. and Wu, Y. (2016) Effect of Mg Substitution for La on Microstructure, Hydrogen Storage and Electrochemical Properties of La 1−x Mg x Ni 3.5 (x = 0.20, 0.23, 0.25 at%) Alloys. Progress in Natural Science: Materials International, 26, 177-181. https://doi.org/10.1016/j.pnsc.2016.03.008
Huot, J. and Tousignant, M. (2017) Hydrogen Sorption Enhancement in Cold-Rolled and Ball-Milled CaNi5. Journal of Materials Science, 52, 11911-11918. https://doi.org/10.1007/s10853-017-1250-z
Emami, H., Edalati, K., Matsuda, J., Akiba, E. and Horita, Z. (2015) Hydrogen Storage Performance of TiFe after Processing by Ball Milling. Acta Materialia, 88, 190-195. https://doi.org/10.1016/j.actamat.2014.12.052
Chen, X.Y., Chen, R.R., Ding, X., Fang, H.Z., Guo, J.J., Ding, H.S., Su, Y.Q. and Fu, H.Z. (2018) Crystal Structure and Hydrogen Storage Properties of Ti-V-Mn Alloys. International Journal of Hydrogen Energy, 43, 6210-6218. https://doi.org/10.1016/j.ijhydene.2018.02.009
Zhou, H.Y., Wang, F., Wang, J., Wang, Z.M., Yao, Q.R., Deng, J.Q., Tang, C.Y. and Rao, G.H. (2014) Hydrogen Storage Properties and Thermal Stability of V35Ti20Cr45 Alloy by Heat Treatment. International Journal of Hydrogen Energy, 39, 14887-14895. https://doi.org/10.1016/j.ijhydene.2014.07.054
Shahi, R.R., Yadav, T.P., Shaz, M.A., Srivastava, O.N. and van Smaalen, S. (2011) Effect of Processing Parameter on Hydrogen Storage Characteristics of As Quenched Ti45Zr38Ni17 Quasicrystalline Alloys. International Journal of Hydrogen Energy, 36, 592-599. https://doi.org/10.1016/j.ijhydene.2010.10.031
Hu, F., Wen, Y., Chan, K.C., Yue, T.M., Zhou, Y.Z., Zhu, S.L. and Yang, X.J. (2015) Synthesis of Self-Detached Nanoporous Titanium-Based Metal Oxide. Journal of Solid State Chemistry, 229, 78-86. https://doi.org/10.1016/j.jssc.2015.05.021
Wang, W., Zhang, X. and Sun, J. (2018) Phase Stability and Tensile Behavior of Metastable β Ti-V-Fe and Ti-V-Fe-Al Alloys. Materials Characterization, 142, 398-405. https://doi.org/10.1016/j.matchar.2018.06.008
Itoh, H., Arashima, H., Kubo, K., Kabutomori, T. and Ohnishi, K. (2005) Improvement of Cyclic Durability of BCC Structured Ti-Cr-V Alloys. Journal of Alloys and Compounds, 404-406, 417-420. https://doi.org/10.1016/j.jallcom.2004.12.175
Wang, X.Y., Zhang, S.L., Feng, S.D., Qi, L. and Liu, R.P. (2018) Effect of Pressure on the Structure of Ti75Al25 Alloy during Rapid-Quenching Process. Journal of Non-Crystalline Solids, 502, 136-141. https://doi.org/10.1016/j.jnoncrysol.2018.08.001
Baster, D., Takasaki, A., Kuroda, C., Hanc, E., Lee, S.-H., Świerczek, K., Szmyd, J.S., Kim, J.-Y. and Molenda, J. (2013) Effect of Mechanical Milling on Electrochemical Properties of Ti 45 Zr 38-x Ni 17+x (x = 0, 8) Quasicrystals Produced by Rapid-Quenching. Journal of Alloys and Compounds, 580, S238-S242. https://doi.org/10.1016/j.jallcom.2013.03.272
Liu, B., Zhang, Y., Mi, G., Zhang, Z. and Wang, L. (2009) Crystallographic and ElectroChemical Characteristics of Ti-Zr-Ni-Pd Quasicrystalline Alloys. International Journal of Hydrogen Energy, 34, 6925-6929. https://doi.org/10.1016/j.ijhydene.2009.06.044
Takasaki, A. and Kelton, K.F. (2002) High-Pressure Hydrogen Loading in Ti45Zr38Ni17 Amorphous and Quasicrystal Powders Synthesized by Mechanical Alloying. Journal of Alloys and Compounds, 347, 295-300. https://doi.org/10.1016/S0925-8388(02)00782-X
Ouyang, L., Huang, J., Wang, H., Liu, J. and Zhu, M. (2017) Progress of Hydrogen Storage Alloys for Ni-MH Rechargeable Power Batteries in Electric Vehicles: A Review. Materials Chemistry and Physics, 200, 164-178. https://doi.org/10.1016/j.matchemphys.2017.07.002
Liu, H., Zhai, X., Li, Z., Tao, X., Liu, W. and Zhao, J. (2018) Improved Electrochemical Hydrogen Storage Performance of Ti49Zr26Ni25 Quasicrystal Alloy by Doping with Mesoporous α-Fe2O3 Particles. International Journal of Hydrogen Energy, 43, 7447-7455. https://doi.org/10.1016/j.ijhydene.2018.02.149
Tian, F. and Li, N. (2020) Investigation of the Feasibility of A Novel Heat Stamping Process for Producing Complex-Shaped Ti-6Al-4V Panel Components. Procedia Manufacturing, 47, 1374-1380. https://doi.org/10.1016/j.promfg.2020.04.267
Shukla, S. and Bajpai, V. (2020) Effect of Cryogenic Quenching on Microstructure and Microhardness of Ti-6Al-4V Alloy. Materials Letters, 267, Article ID: 127532. https://doi.org/10.1016/j.matlet.2020.127532
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D.C.W., Gupta, J., Gao, B., Cao, X., Tang, J. and Ok, Y.S. (2020) Ball Milling as a Mechanochemical Technology for Fabrication of Novel Biochar Nanomaterials. Bioresource Technology, 312, Article ID: 123613. https://doi.org/10.1016/j.biortech.2020.123613
Lee, J.-H., Park, H.-K., Kim, J.-H., Jang, J.-H., Hong, S.-K. and Oh, I.-H. (2020) Constitutive Behavior and Microstructural Evolution in Ti-Al-Si Ternary Alloys Processed by Mechanical Milling and Spark Plasma Sintering. Journal of Materials Research and Technology, 9, 2247-2258. https://doi.org/10.1016/j.jmrt.2019.12.056
Khajavi, S., Rajabi, M. and Huot, J. (2019) Effect of Cold Rolling and Ball Milling on First Hydrogenation of Ti 0.5 Zr 0.5 (Mn 1−x Fe x ) Cr1, x = 0, 0.2, 0.4. Journal of Alloys and Compounds, 775, 912-920. https://doi.org/10.1016/j.jallcom.2018.10.179
Das, B. and Patra, A. (2020) Fabrication of W-Ti-Mo Alloys and Its Microstructure, Mechanical Properties Prepared by Mechanical Alloying. Materials Today: Proceedings, 26, 2845-2852. https://doi.org/10.1016/j.matpr.2020.02.592
Vega, L.E.R., Leiva, D.R., Leal Neto, R.M., Silva, W.B., Silva, R.A., Ishikawa, T.T., Kiminami, C.S. and Botta, W.J. (2020) Improved Ball Milling Method for the Synthesis of Nanocrystalline TiFe Compound Ready to Absorb Hydrogen. International Journal of Hydrogen Energy, 45, 2084-2093. https://doi.org/10.1016/j.ijhydene.2019.11.035
Ariga, Y., Takasaki, A., Kimijima, T. and Świerczek, K. (2015) Electrochemical Properties of Ti 49 Zr 26 Ni 25−x Pd x (x = 0-6) Quasicrystal Electrodes Produced by Mechanical Alloying. Journal of Alloys and Compounds, 645, S152-S154. https://doi.org/10.1016/j.jallcom.2015.01.114
Sun, F., Yan, M.-Y., Liu, X.-P., Ye, J.-H., Li, Z.-N., Wang, S.-M. and Jiang, L.-J. (2015) Effect of N2, CH4 and O2 on Hydrogen Storage Performance of 2LiNH2 + MgH2 system. International Journal of Hydrogen Energy, 40, 6173-6179. https://doi.org/10.1016/j.ijhydene.2015.03.084
Zhang, T.B., Yang, X.W., Li, J.S., Hu, R., Xue, X.Y. and Fu, H.Z. (2012) On the Poisoning Effect of O2 and N2 for the Zr0.9Ti0.1V2 Hydrogen Storage Alloy. Journal of Power Sources, 202, 217-224. https://doi.org/10.1016/j.jpowsour.2011.12.002
Sandrock, G. (1999) A Panoramic Overview of Hydrogen Storage Alloys from AGas Reaction Point of View. Journal of Alloys and Compounds, 293-295, 877-888. https://doi.org/10.1016/S0925-8388(99)00384-9
Liu, H., Liu, W., Sun, Y., Chen, P., Zhao, J., Guo, X. and Su, Z. (2020) Preparation and Electrochemical Hydrogen Storage Properties of Ti49Zr26Ni25 Alloy Covered with Porous Polyaniline. International Journal of Hydrogen Energy, 45, 11675-11685. https://doi.org/10.1016/j.ijhydene.2020.02.115
Lin, J., Sun, L., Cao, Z., Yin, D., Liang, F., Wu, Y. and Wang, L. (2016) A Novel Method to Prepare Ti1.4V0.6Ni Alloy Covered with Carbon and Nanostructured Co3O4, and Its Good Electrochemical Hydrogen Storage Properties as Negative Electrode Material for Ni-MH battery. Electrochimica Acta, 222, 1716-1723. https://doi.org/10.1016/j.electacta.2016.11.163
Zadorozhnyy, V., Klyamkin, S., Zadorozhnyy, M., Bermesheva, O. and Kaloshkin, S. (2012) Hydrogen Storage Nanocrystalline TiFe Intermetallic Compound: Synthesis by Mechanical Alloying and Compacting. International Journal of Hydrogen Energy, 37, 17131-17136. https://doi.org/10.1016/j.ijhydene.2012.08.078
Abe, M. and Kuji, T. (2007) Hydrogen Absorption of TiFe Alloy Synthesized by Ball Milling and Post-Annealing. Journal of Alloys and Compounds, 446-447, 200-203. https://doi.org/10.1016/j.jallcom.2006.12.063
Berdonosova, E.A., Klyamkin, S.N., Zadorozhnyy, V.Y., Zadorozhnyy, M.Y., Geodakian, K.V., Gorshenkov, M.V. and Kaloshkin, S.D. (2016) Calorimetric Study of Peculiar Hydrogenation Behavior of Nanocrystalline TiFe. Journal of Alloys and Compounds, 688, 1181-1185. https://doi.org/10.1016/j.jallcom.2016.07.145
Hotta, H., Abe, M., Kuji, T. and Uchida, H. (2007) Synthesis of Ti-Fe Alloys by Mechanical Alloying. Journal of Alloys and Compounds, 439, 221-226. https://doi.org/10.1016/j.jallcom.2006.05.137
Zaluski, L., Tessier, P., Ryan, D.H., Doner, C.B., Zaluska, A., Ström-Olsen, J.O., Trudeau, M.L. and Schulz, R. (1993) Amorphous and Nanocrystalline Fe-Ti Prepared by Ball Milling. Journal of Materials Research, 8, 3059-3068. https://doi.org/10.1557/JMR.1993.3059
Falcão, R.B., Dammann, E.D.C.C., Rocha, C.J., Durazzo, M., Ichikawa, R.U., Martinez, L.G., Botta, W.J. and Leal Neto, R.M. (2018) An Alternative Route to Produce Easily Activated Nanocrystalline TiFe Powder. International Journal of Hydrogen Energy, 43, 16107-16116. https://doi.org/10.1016/j.ijhydene.2018.07.027
Haraki, T., Oishi, K., Uchida, H., Miyamoto, Y., Abe, M., Kokaji, T. and Uchida, S. (2008) Properties of Hydrogen Absorption by Nano-Structured FeTi Alloys. International Journal of Materials Research, 99, 507-512. https://doi.org/10.3139/146.101669
Vega, L.E.R., Leiva, D.R., Leal Neto, R.M., Silva, W.B., Silva, R.A., Ishikawa, T.T., Kiminami, C.S. and Botta, W.J. (2018) Mechanical Activation of TiFe for Hydrogen Storage by Cold Rolling under Inert Atmosphere. International Journal of Hydrogen Energy, 43, 2913-2918. https://doi.org/10.1016/j.ijhydene.2017.12.054
Edalati, K., Matsuda, J., Yanagida, A., Akiba, E. and Horita, Z. (2014) Activation of TiFe for Hydrogen Storage by Plastic Deformation Using Groove Rolling and High-Pressure Torsion: Similarities and Differences. International Journal of Hydrogen Energy, 39, 15589-15594. https://doi.org/10.1016/j.ijhydene.2014.07.124
Manna, J., Tougas, B. and Huot, J. (2018) Mechanical Activation of Air Exposed TiFe+4wt% Zr Alloy for Hydrogenation by Cold Rolling and Ball Milling. International Journal of Hydrogen Energy, 43, 20795-20800. https://doi.org/10.1016/j.ijhydene.2018.09.096
Leng, H., Yan, P., Han, X., Liu, W., Liu, Q. and Li, Q. (2020) Microstructural Characterization and Hydrogenation Performance of ZrxV5Fe(x=3-9) Alloys. Progress in Natural Science: Materials International, 30, 229-238. https://doi.org/10.1016/j.pnsc.2020.01.002
de Araujo-Silva, R.A., Jorge Jr., A.M., Vega, L.E.R., Leal Neto, R.M., Leiva, D.R. and Botta, W.J. (2019) Hydrogen Desorption/Absorption Properties of the Extensively Cold Rolled β Ti-40Nb Alloy. International Journal of Hydrogen Energy, 44, 20133-20144. https://doi.org/10.1016/j.ijhydene.2019.05.211
Radhi, H.N., Aljassani, A.M.H. and Mohammed, M.T. (2020) Effect of ECAP on Microstructure, Mechanical and Tribological Properties of Aluminum and Brass Alloys: A Review. Materials Today: Proceedings, 26, 2302-2307. https://doi.org/10.1016/j.matpr.2020.02.497
Polyakova, V.V., Semenova, I.P., Polyakov, A.V., Magomedova, D.K., Huang, Y. and Langdon, T.G. (2017) Influence of Grain Boundary Misorientations on the Mechanical Behavior of ANear-α Ti-6Al-7Nb Alloy Processed by ECAP. Materials Letters, 190, 256-259. https://doi.org/10.1016/j.matlet.2016.12.083
Huang, S.-J., Chiu, C., Chou, T.-Y. and Rabkin, E. (2018) Effect of Equal Channel Angular Pressing (ECAP) on Hydrogen Storage Properties of Commercial Magnesium Alloy AZ61. International Journal of Hydrogen Energy, 43, 4371-4380. https://doi.org/10.1016/j.ijhydene.2018.01.044
Bartha, K., Veverková, A., Strásky, J., Vesely, J., Minárik, P., Corrêa, C.A., Polyakova, V., Semenova, I. and Janeček, M. (2020) Effect of the Severe Plastic Deformation by ECAP on Microstructure and Phase Transformations in Ti-15Mo alloy. Materials Today Communications, 22, Article ID: 100811. https://doi.org/10.1016/j.mtcomm.2019.100811
Czerwinski, A., Lapovok, R., Tomus, D., Estrin, Y. and Vinogradov, A. (2011) The Influence of Temporary Hydrogenation on ECAP Formability and Low Cycle Fatigue Life of CP Titanium. Journal of Alloys and Compounds, 509, 2709-2715. https://doi.org/10.1016/j.jallcom.2010.11.188
Verleysen, P. and Lanjewar, H. (2020) Dynamic High-Pressure Torsion: A Novel Technique for Dynamic Severe Plastic Deformation. Journal of Materials Processing Technology, 276, Article ID: 116393. https://doi.org/10.1016/j.jmatprotec.2019.116393
Zhilyaev, A.P. and Langdon, T.G. (2008) Using High-Pressure Torsion for Metal Processing: Fundamentals and Applications. Progress in Materials Science, 53, 893-979. https://doi.org/10.1016/j.pmatsci.2008.03.002
Yang, J., Wang, G., Park, J.M. and Kim, H.S. (2019) Microstructural Behavior and Mechanical Properties of Nanocrystalline Ti-22Al-25Nb Alloy Processed by High-Pressure Torsion. Materials Characterization, 151, 129-136. https://doi.org/10.1016/j.matchar.2019.02.029
Wei, D.-X., Koizumi, Y., Nagasako, M. and Chiba, A. (2017) Refinement of Lamellar Structures in Ti-Al Alloy. Acta Materialia, 125, 81-97. https://doi.org/10.1016/j.actamat.2016.11.045
Shuitcev, A., Gunderov, D.V., Sun, B., Li, L., Valiev, R.Z. and Tong, Y.X. (2020) Nanostructured Ti29.7Ni50.3Hf20 High Temperature Shape Memory Alloy Processed by High-Pressure Torsion. Journal of Materials Science & Technology, 52, 218-225. https://doi.org/10.1016/j.jmst.2020.01.065
Jia, J., Zhang, K. and Jiang, S. (2014) Microstructure and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by Vacuum Hot Pressing Sintering. Materials Science and Engineering: A, 616, 93-98. https://doi.org/10.1016/j.msea.2014.08.018
Niu, H.Z., Chen, Y.F., Zhang, D.L., Zhang, Y.S., Lu, J.W., Zhang, W. and Zhang, P.X. (2016) Fabrication of a Powder Metallurgy Ti2AlNb-Based Alloy by Spark Plasma Sintering and Associated Microstructure Optimization. Materials & Design, 89, 823-829. https://doi.org/10.1016/j.matdes.2015.10.042
Lu, Z.-G., Wu, J., Guo, R.-P., Xu, L. and Yang, R. (2017) Hot Deformation Mechanism and Ring Rolling Behavior of Powder Metallurgy Ti2AlNb Intermetallics. Acta Metallurgica Sinica (English Letters), 30, 621-629. https://doi.org/10.1007/s40195-017-0583-6
Sim, K.H., Wang, G., Ju, J.M., Yang, J. and Li, X. (2017) Microstructure and Mechanical Properties of A Ti-22Al-25Nb Alloy Fabricated from Elemental Powders by Mechanical Alloying and Spark Plasma Sintering. Journal of Alloys and Compounds, 704, 425-433. https://doi.org/10.1016/j.jallcom.2017.01.354
Shagiev, M.R., Galeyev, R.M., Valiakhmetov, O.R. and Safiullin, R.V. (2008) Improved Mechanical Properties of Ti2AlNb-Based Intermetallic Alloys and Composites. Advanced Materials Research, 59, 105-108. https://doi.org/10.4028/www.scientific.net/AMR.59.105
Mao, Y., Yang, S., Wu, C., Luo, L. and Chen, Y. (2017) Preparation of (FeV80)48Ti26+xCr26(x=0-4) Alloys by the Hydride Sintering Method and Their Hydrogen Storage Performance. Journal of Alloys and Compounds, 705, 533-538. https://doi.org/10.1016/j.jallcom.2017.02.166
El-Shafie, M., Kambara, S. and Hayakawa, Y. (2019) Hydrogen Production Technologies Overview. Journal of Power and Energy Engineering, 7, 107-154. https://doi.org/10.4236/jpee.2019.71007
Rosen, M. (2015) The Prospects for Renewable Energy through Hydrogen Energy Systems. Journal of Power and Energy Engineering, 3, 373-377. https://doi.org/10.4236/jpee.2015.34050
Ren, L., Zhou, S. and Ou, X. (2020) Life-Cycle Energy Consumption and Greenhouse-Gas Emissions of Hydrogen Supply Chains for Fuel-Cell Vehicles in China. Energy, 209, 118482. https://doi.org/10.1016/j.energy.2020.118482
Thomas, J.M., Edwards, P.P., Dobson, P.J. and Owen, G.P. (2020) Decarbonising Energy: The Developing International Activity in Hydrogen Technologies and Fuel Cells. Journal of Energy Chemistry, 51, 405-415. https://doi.org/10.1016/j.jechem.2020.03.087