Feasibility of Prototyping the Jominy Test Device: Corroborating for Studies and Preliminary Results of the Heating and Data Acquisition Subsystems
- 1 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 2 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 3 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 4 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 5 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 6 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 7 Department Management and Business, State College of Technology (FATEC), São Paulo, Brazil
- 8 Department Mathematics, International University Center (UNINTER), São Paulo, Brazil
- 9 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 10 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 11 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 12 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 13 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 14 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 15 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 16 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 17 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- 18 Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
- Department Mechanical Engineering, Salesian University Center of Sao Paulo (UNISAL), São Paulo, Brazil
Abstract
This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototype of the device, covering the four aspects of the project, being they: test device, test body heating system, test automation and instrumentation using embedded electronics and financial analysis for the elaboration of this project in Brazil. It was possible to observe in the results that the system is efficient, simple and functional, it was possible to obtain the first test carried out in the controlled environment the temperature data in degrees centigrade, the recorded data were automatically launched in Microsoft Excel by the PLX DAQ software, making the acquisition of the data. In the matter of preparing the test device, the drawings are presented in the 3D modeling software, cost tables of the materials used for assembly in Brazil. In terms of the heating system, a heating system was adopted that uses electromagnetic induction, the cost of materials related to the heating system design was also presented. Another relevant factor that contributes to the research and improvement of the prototype is the municipality, located in the Paraiba Valley region, located in the state of São Paulo, consisting of a fertile and relevant scenario of regional, national, international and multinational statistics, thus concluding the effectiveness for the mainly metallurgical industries. The results obtained were satisfactory and consistent, when they were created for the Jominy test device with the ability to submit small pieces for testing and mainly essential in the didactic point of view for a higher education institution of engineering and technology.
- Bradesco. Steel Sectorial Information. Economy in Day. https://www.economiaemdia.com.br/BradescoEconomiaEmDia/static_files/pdf/pt/monitores/ setorial/infset_mineracao_siderurgia.pdf
- Santos, R.O.B., Prado, P.H.C., Oliveira, L.V.M. and Gama, R.P. (2020) Metalloghaphic Analysis of SAE 1020 Steel Cavac Formation in a Turning Process per Computered Numerical Command. SODEBRAS, 15, 53-59. https://doi.org/10.29367/issn.1809-3957.15.2020.175.53
- Chiaverini, V. (1996) Steels and Cast Iron. 7th Edition. ABM, São Paulo.
- Gama, R.P. and Ribeiro, M.V. (2015) Effects of Cutting Fluid Application in the Performance of the Nimomic 80A Turning. Key Engineering Materials, 656-657, 243-250. https://doi.org/10.4028/www.scientific.net/KEM.656-657.243
- Thakur, A., Tak, M. and Mote, R.G. (2019) Electrochemical Micromachining Behavior on 17-4 PH Stainless Steel Using Different Electrolytes. Procedia Manufacturing, 34, 355-361. https://doi.org/10.1016/j.promfg.2019.06.177
- Yekinni, A.A., Agunsoye, J.O., Bello, S.A., Awe, I.O. and Talabi, S.I. (2014) Fabrication of End Quenched Machine: Hardenability Evaluation. Journal of Minerals and Materials Characterization and Engineering, 2, 107-113. https://doi.org/10.4236/jmmce.2014.22014
- Yanu, C.A., Sieliechi, J.M. and Ngassoum, M.B. (2020) Optimization of Ceramic Paste Viscosity Use for the Elaboration of Tubular Membrane Support by Extrusion and Its Application. Journal of Materials Science and Chemical Engineering, 8, 1-22. https://doi.org/10.4236/msce.2020.83001
- Giroto, L.G.F.F., Boaventura, G.A.S., Gama, R.P., et al. (2020) Development and Financial Analysis for the Elaboration Jominy Test Device: Conception of an Engineering Project from the Point of View Undergraduate Students. International Journal of Advanced Engineering Research and Science, 7, 331-336. https://doi.org/10.22161/ijaers.76.41
- Baldam, R. (2015) AutoCAD 2016: Utilizando Totalmente. Saraiva Educação SA.
- Aços Roman. SAE 4140 | Aço Cromo-MolibdênioRoman Steels SAE 4140 | Chrome Molybdenum Steel. https://aco.com.br/aco/sae-4140-cromo-molibdenio-cr-mo/
- Ferreira, C.R. (2004) Heat Treatment by Electromagnetic Induction of SAE 1045 Steel Rods for Geological Survey. Master Thesis, Federal University of Ouro Preto, Ouro Preto.
- do Carmo, T.A., Cabette, R.E.S. and Gomes, R.G. (2020) Prototype of Robotic Mechanical Prosthesis of Upper Limb at Low Cost. International Journal of Advanced Engineering Research and Science, 7, 22-26. https://doi.org/10.22161/ijaers.74.2