Evaluation of SrBr<sub>2</sub> Hydration Reaction Rate with Repeated Cycling
- 1 Department of Earth Resources Engineering, Kyushu University, Fukuoka, Japan
- 2 Department of Earth Resources Engineering, Kyushu University, Fukuoka, Japan
Abstract
In this study, we evaluated the SrBr 2 hydration reaction rate on repeated cycling. It was estimated that hydrated SrBr 2 particles were expanded by hydration and condensed to form secondary particles; thus, the hydration reaction was reduced by repeated cycles. Using volumetric methods, we examined the effect of repetition on the reaction rate for 900 cycles during hydration and dehydration and analyzed the reaction rate using the unreacted core-shell model. From the experimental and calculated results, we confirmed that reaction rate decreased and the sample particles formed secondary particles after 900 repeated cycles. By analyzing the unreacted core-shell model, we found that the coefficient of H 2 O diffusion in the particles exponentially decreased with increasing repeated cycles. The value of the diffusion coefficient after 900 cycles was five times lower than that of the first cycle. To achieve stable repeated hydration cycles, technology to control the formation of secondary particles must be investigated.
- Edem N’Tsoukpoe, K., Le Pierrès, N., Liu, H. and Luo, L. (2009) A Review of Long-Term Sorption Solar Energy Storage. Renewable and Sustainable Energy Reviews, 13, 2385-2396. https://doi.org/10.1016/j.rser.2009.05.008
- Kokouvi, E.N., Holger, U.R., Armand, F.L., Kathrin, K., Beatriz, A.W., Thomas, S. and Wolfgang, K.L.R. (2015) A Review on the Use of Calcium Chloride in Applied Thermal Engineering. Applied Thermal Engineering, 75, 513-531. https://doi.org/10.1016/j.applthermaleng.2014.09.047
- Lahmidi, H., Mauran, S. and Goetz, V. (2006) Definition, Test and Simulation of a Thermochemical Storage Process Adapted to Solar Thermal Systems. Solar Energy, 80, 883-893. https://doi.org/10.1016/j.solener.2005.01.014
- Kato, Y., Yamashita, N. and Yoshizawa, Y. (1993) Study of a Chemical Heat Pump with Reaction System of Magnesium Oxide/Water. Kagaku Kogaku Ronbunshu, 19, 1213-1216.
- Kato, Y., Kobayashi, K. and Yoshizawa, Y. (1998) Durability to the Repetitive Reaction of Magnesium Oxide/Water Reaction System for a Heat Pump. Applied Thermal Engineering, 18, 85-92. https://doi.org/10.1016/S1359-4311(97)00058-6
- Lee, J., Ogura, H. and Sato, S. (2014) Reaction Control of CaSO4 during Hydration/Dehydration Repetition for Chemical Heat Pump System. Applied Thermal Engineering, 63, 192-199. https://doi.org/10.1016/j.applthermaleng.2013.10.043
- Kato, T. and Kobayashi, N. (2012) Output Characteristics Evaluation of Heat Upgrading Operation in a CaBr2/H2O Chemical Heat Pump. Japan Society of Energy and Resources, 33, 1-8.
- Kuwata, K., Esaki, T., Yasuda, M., Matsuda, T., Kobayashi, N., Shiren, Y. and Aman, Y. (2017) Durability of Thermochemical Heat Storage Demonstrated through Long-Term Repetitive CaCl2/H2O Reversible Reactions. Journal of Renewable and Sustainable Energy, 9, 024102. https://doi.org/10.1063/1.4978351
- Farcot, L., Pierrès, N.L. and Fourmigué, J.F. (2019) Experimental Investigation of a Moving-Bed Heat Storage Thermochemical Reactor with SrBr2/H2O Couple. Journal of Energy Storage, 26, 101009. https://doi.org/10.1016/j.est.2019.101009
- Esaki, T. and Kobayashi, N. (2016) Reaction Rate Characteristics of SrBr2 Hydration System for a Chemical Heat Pump Cooling Mode. Journal of Materials Science and Chemical Engineering, 4, 106-115. https://doi.org/10.4236/msce.2016.42012
- Esaki, T., Kuwata, K., Ichinose, A. and Kobayashi, N. (2017) Reaction Rate Analysis with Unreacted-Core Shell Model for a Chemical Heat Pump Cooling Mode with SrBr2 Hydration. Transactions of the JSME, 83, 1-9. (In Japanese)