Research ArticleOpen AccessGoogle Scholar indexed
Control of Inclusions in 49MnVS3 Non-Quenched and Tempered Steel by Mg Treatment
Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
- 1 Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
- 2 Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
- 3 Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
- 4 Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
- 5 Center for Advanced Solidification Technology (CAST), School of Materials Science and Engineering, Shanghai University, Shanghai, China
Journal of Materials Science and Chemical Engineering·Volume 10 (2022)·Pages 47–54·Published 14 July 2022·DOI10.4236/msce.2022.107004
Copy link · social · email
Abstract
To explore the effect of different Mg contents on the morphology, composition, distribution, and deformation of sulfides in 49MnVS3 non-quenched and tem-pered steel, the inclusions were observed and counted by Zeiss metallographic microscope and scanning electron microscope, and the inclusions in the com-pressed samples were compared by Gleeble-3500 thermal simulation test ma-chine. Results showed that the size of sulfide in steel decreases and the distri-bution uniformity of sulfide are significantly improved with the increase of Mg content. The proportion of composite inclusions in steel increases obviously, and the proportion of individual MnS decreases. The composition of the included core is in accordance with the principle of Al 2 O 3 → Al 2 O 3 + MgO·Al 2 O 3 → MgO·Al 2 O 3 + MgO → MgO → MgO + MgS. After Gleeble compression, the aspect ratio of sulfide inclusions decreases, and the spindle ratio h increases significantly.
KeywordsMg TreatmentNon-Quenched and Tempered SteelSulfideComposite InclusionsGleeble
- Davim, J.P., Gaitonde, V.N. and Karnik, S.R. (2008) Investigations into the Effect of Cutting Conditions on Surface Roughness in Turning of Free Machining Steel by ANN Models, Journal of Materials Processing Technology, 205, 16-23. https://doi.org/10.1016/j.jmatprotec.2007.11.082
- Cerullo, M. (2014) Sub-Surface Fatigue Crack Growth at Alumina Inclusions in AISI 52100 Roller Bearings. Procedia Engineering, 74, 333-338. https://doi.org/10.1016/j.proeng.2014.06.274
- Zhang, T.S., Wang, D.Y. and Liu, C.W. (2014) Modification of Inclusions in Liquid Iron by Mg Treatment. Journal of Iron and Steel Research, International, 21, 99-103. https://doi.org/10.1016/S1006-706X(14)60130-8
- Shen, P. and Fu, J. (2019) Morphology Study on Inclusion Modifications Using Mg-Ca Treatment in Resulfurized Special Steel. Materials (Basel, Switzerland), 12, Article 197. https://doi.org/10.3390/ma12020197
- Liu, Y. and Zong, N. (2017) Effects of Al-Mg Alloy Treatment on Behavior and Size of Inclusions in SUH 409L Stainless Steel. Metallurgical Research & Technology, 115, Article No. 111. https://doi.org/10.1051/metal/2017085
- Fu, J., Yu, Y.G., Wang, A.R. and Chen, B.P. (2009) Inclusion Modification with Mg Treatment for 35CrNi3MoV Steel. Journal of Materials Science & Technology, 14, 53-56.
- Xie, J.B., Zhang, D. and Yang, Q.K. (2018) Exploration of Morphology Evolution of the Inclusions in Mg-Treated 16MnCrS5 Steel. Ironmaking & Steelmaking, 46, 564-573. https://doi.org/10.1080/03019233.2018.1492501
- Xu, J., Yang, Q.K. and Cheng, J. (2017) The Evolution and Thermodynamic Analysis of Inclusions in Gear Steel after Magnesium Treatment. Proceedings of the 2017 International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM), Advances in Engineering, Vol. 100, 511-515. https://doi.org/10.2991/icmeim-17.2017.86
- Sun, H., Wu, L.P. and Xie, J.B. (2020) Inclusions Modification and Improvement of Machinability in a Non-Quenched and Tempered Steel with Mg Treatment. Metallurgical Research & Technology, 117, Article No. 208. https://doi.org/10.1051/metal/2020021
- Lin, S.G., Yang, H.H. and Su, Y.H. (2019) CALPHAD-Assisted Morphology Control of Manganese Sulfide Inclusions in Free-Cutting Steels. Journal of Alloys and Compounds, 779, 844-855. https://doi.org/10.1016/j.jallcom.2018.11.290
- Yang, S., Wang, Q. and Zhang, L. (2012) Formation and Modification of MgO·Al 2 O 3 -Based Inclusions in Alloy Steels. Metallurgical and Materials Transactions B, 43, 731-750. https://doi.org/10.1007/s11663-012-9663-1