Investigation of the Potential of Using Liquid Rubbers in Rubber Industry
- 1 Anlas Tyre Company R&D Center, Düzce, Türkiye
- 2 Anlas Tyre Company R&D Center, Düzce, Türkiye
- 3 Department of Mechanical Engineering, Faculty of Engineering, Düzce University, Düzce, Türkiye
- 4 Anlas Tyre Company R&D Center, Düzce, Türkiye
Abstract
Along with the developing technology in the rubber industry, the use of natural and synthetic rubbers as well as liquid rubbers has increased significantly in recent years. The formulation of the tread compound, which directly affects the performance of a tire, is generally produced from natural and synthetic rubbers. Intensive scientific studies have been carried out on liquid rubbers because they reduce the consumption of process oils used in the tire production phase and increase dispersion. In this study, the rheological and physico-mechanical properties of rubbers developed using only liquid rubber (liquid isoprene and liquid SBR) with four different viscosities and without using process oil (Styrene Butadiene Rubber—SBR) were investigated. It has been observed that the rubber blends produced by adding four different liquid rubbers to the same recipe caused changes in rheological and physico-mechanical properties compared to the reference sample. It was observed that the minimum torque/viscosity (ML), maximum torque/viscosity (MH) and curing time (t90) in some of the formulas tested decreased significantly due to the use of liquid rubber.
- Yip, E. and Cacioli, P. (2002) The Manufacture of Gloves from Natural Rubber Latex. Journal of Allergy and Clinical Immunology, 110, S3-S14. https://doi.org/10.1067/mai.2002.124499.
- Njom, A., Mewoli, A., Ndengue, M., Ebanda, F., Nitidem, A., Otiti, S., Bang, Y., Belinga, L., Noah, P. and Ateba, A. (2022) Hybrid Composite Based on Natural Rubber Reinforced with Short Fibers of the Triumfetta cordifolia/Saccharum officinarum L.: Performance Evaluation. Journal of Minerals and Materials Characterization and Engineering, 10, 385-399. https://doi.org/10.4236/jmmce.2022.105027
- Hermann Ohouo, D., Honoré Kouakou, C., Olivier Boffoue, M., Eméruwa, E. and Traoré, B. (2022) Incorporation of Clay into Natural Rubber (Hevea) for the Production of Tile Adhesive. Open Journal of Composite Materials, 12, 30-40. https://doi.org/10.4236/ojcm.2022.121003
- Coran, A.Y. (1994) Vulcanization. Science and Technology of Rubber. Academic Press, New York, 339-385. https://doi.org/10.1016/B978-0-08-051667-7.50012-3.
- Kaewsakul, W., Sahakaro, K., Dierkes, W.K. and Noordermeer, J.W. (2012) Optimization of Mixing Conditions for Silica-Reinforced Natural Rubber Tire Tread Compounds. Rubber Chemistry and Technology, 85, 277-294. https://doi.org/10.5254/rct.12.88935.
- Öztürk, E. (2008) The Effect Of Accelerators On Vulcanization Of Different Rubber Compounds. Ph.D. Thesis, Sakarya University Institute of Science, Sakarya.
- Erol, D. (2011) Vehicle Tires. Journal of Vehicle Technologies, 3, 37-50.
- Akyüz, S. (2020) Production and Test Methods of Natural Rubber (NR)/Styrene Butadiene Rubber (SBR) Based Bushings. Master Thesis, Bursa Technical University Institute of Science, Bursa. https://www.kuraray.com/products/liquid-rubber
- Çeltik, F. (2020) Effect of Liquid Rubbers on The Thermal, Mechanical and Adhesion Properties of The Tire Skim Compound. Master Thesis, Kocaeli University Institute of Science, Kocaeli.
- Gruendken, M., Velencoso, M.M., Hirata, K. and Blume, A. (2020) Structure-Property Relationship of Low Molecular Weight “Liquid” Polymers in Blends of Sulphur Cured SSBR-Rich Compounds. Polymer Testing, 87, Article No. 106558. https://doi.org/10.1016/j.polymertesting.2020.106558
- Luxton, A. R. (1981) The Preparation, Modification and Applications of Nonfunctional Liquid Polybutadienes. Rubber Chemistry and Technology, 54, 596-626. https://doi.org/10.5254/1.3535822.