Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses
School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
,
School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
,
Faculty of Science and Technology, Technological and Higher Education Institute of Hong Kong, Hong Kong, China
,
Faculty of Science and Technology, Technological and Higher Education Institute of Hong Kong, Hong Kong, China
,
School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
1 School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
2 School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
3 Faculty of Science and Technology, Technological and Higher Education Institute of Hong Kong, Hong Kong, China
4 Faculty of Science and Technology, Technological and Higher Education Institute of Hong Kong, Hong Kong, China
5 School of Fashion and Textiles, Hong Kong Polytechnic University, Hong Kong, China
Poly[R-3-hydroxybutyrate-co-(R-3-hydroxyvalerate)] (PHBVs) copolymers are promising biopolymers, which could substitute petroleum-based plastics for various applications. PHB and PHBV pellets were processed on a customized 3D printer via Fused Granular Manufacturing (FGM) approach modified with a Mahor screw extruder. To anticipate the behaviour of PHBVs when transformed using conventional thermo-mechanical shaping processes, thermal and mechanical analyses were carried out in order to better understand the effect of annealing temperature on their crystallization behaviour and mechanical properties of PHB polymer and PHBV copolymer. The objectives of the present work were to propose an experimental strategy to study the melting and crystallization events, crystalline structure changes, and mechanical performances of both PHB homopolymer and PHBV copolymer according to identical thermal annealing treatments. A monitoring of 3D printed PHB and PHBV structures was achieved by coupling Differential Scanning Calorimetry (DSC) and tensile tests.
Calignano, F., Manfredi, D., Ambrosio, E.P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L. and Fino, P. (2017) Overview on Additive Manufacturing Technologies. Proceedings of the IEEE, 105, 593-612. https://doi.org/10.1109/JPROC.2016.2625098
Valkenaers, H., Vogeler, F., Voet, A. and Kruth, J.P. (2013) Screw Extrusion-Based 3D Printing, a Novel Additive Manufacturing Technology. Proceedings of the 5th International Conference on Competitive Manufacturing, Stellenbosch, 30 January-1 February 2013, 97-103.
Shaik, Y.P., Schuster, J. and Shaik, A. (2021) A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes. Open Access Library Journal, 8, e7698.
Alexandre, A., Cruz Sanchez, F.A., Boudaoud, H., Camargo, M. and Pearce, J.M. (2020) Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers. 3D Printing and Additive Manufacturing, 7, 237-247. https://doi.org/10.1089/3dp.2019.0195
Volpato, N., Kretschek, D., Foggiatto, J.A. and da Silva Cruz, C.M.G. (2015) Experimental Analysis of an Extrusion System for Additive Manufacturing Based on Polymer Pellets. The International Journal of Advanced Manufacturing Technology, 81, 1519-1531. https://doi.org/10.1007/s00170-015-7300-2
Reddy, B.V., Reddy, N.V. and Ghosh, A. (2007) Fused Deposition Modelling Using Direct Extrusion. Virtual and Physical Prototyping, 2, 51-60. https://doi.org/10.1080/17452750701336486
Valkenaers, H., Vogeler, F., Ferraris, E., Voet, A. and Kruth, J.P. (2013) A Novel Approach to Additive Manufacturing: Screw Extrusion 3D-Printing. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, 8-10 October 2013, 235-238. https://doi.org/10.3850/978-981-07-7247-5-359
Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B.H., Sun, T.J. and Wang, A.-B. (2018) Screw Extrusion-Based Additive Manufacturing of PEEK. Materials & Design, 140, 209-221. https://doi.org/10.1016/j.matdes.2017.11.032
Whyman, S., Arif, K.M. and Potgieter, J. (2018) Design and Development of an Extrusion System for 3D Printing Biopolymer Pellets. The International Journal of Advanced Manufacturing Technology, 96, 3417-3428. https://doi.org/10.1007/s00170-018-1843-y
Reich, M.J., Woern, A.L., Tanikella, N.G. and Pearce, J.M. (2019) Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing. Materials, 12, Article 1642. https://doi.org/10.3390/ma12101642
Liu, X., Chi, B., Jiao, Z., Tan, J., Liu, F. and Yang, W. (2017) A Large-Scale Double-Stages-Crew 3D Printer for Fused Deposition of Plastic Pellets. Journal of Applied Polymer Science, 134, 45147. https://doi.org/10.1002/app.45147
Byard, D.J., Woern, A.L., Oakley, R.B., Fiedler, M.J., Snabes, S.L. and Pearce, J.M. (2019) Green Fab Lab Applications of Large-Area Waste Polymer-Based Additive Manufacturing. Additive Manufacturing, 27, 515-525. https://doi.org/10.1016/j.addma.2019.03.006
Wickramasinghe, S., Do, T. and Tran, P. (2020) FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polymers, 12, Article 1529. https://doi.org/10.3390/polym12071529
Ferretti, P., Leon-Cardenas, C., Santi, G.M., Sali, M., Ciotti, E., Frizziero, L., Donnici, G. and Liverani, A. (2021) Relationship between FDM 3D Printing Parameters Study: Parameter Optimization for Lower Defects. Polymers, 13, Article 2190. https://doi.org/10.3390/polym13132190
Dai, X.Y., Xing, Z.L., Yang, W., Zhang, C., Li, F., Chen, X., Li, C., Zhou, J.J. and Li, L. (2022) The Effect of Annealing on the Structure and Electric Performance of Polypropylene Films. International Journal of Polymer Science, 2022, Article ID : 5970484. https://doi.org/10.1155/2022/5970484
Bai, H.W., Wang, Y., Zhang, Z.J., Han, L., Li, Y.L., Liu, L., Zhou, Z.W. and Men, Y.F. (2009) Influence of Annealing on Microstructure and Mechanical Properties of Isotactic Polypropylene with β-Phase Nucleating Agent. Macromolecules, 42, 6647-6655. https://doi.org/10.1021/ma9001269
Bai, H.W., Luo, F., Zhou, T.N., Deng, H., Wang, K. and Fu, Q. (2011) New Insight on the Annealing Induced Microstructural Changes and Their Roles in the Toughening of Betaform Polypropylene. Polymer, 52, 2351-2360. https://doi.org/10.1016/j.polymer.2011.03.017
Kang, H.L., Wang, Z., Lin, N., Hao, X.M. and Liu, R.G. (2022) Influence of Drawing and Annealing on the Structure and Properties of Bio-Based Polyamide 56 Fibers. Journal of Applied Polymer Science, 139, e53221. https://doi.org/10.1002/app.53221
Marlin Firmware. http://marlinfw.org
El-Hadi, A., Schnabel, R., Straube, E., Müller, G. and Riemschneider, M. (2002) Effect of Melt Processing on Crystallization Behavior and Rheology of Poly(3-Hydroxybutyrate) (PHB) and Its Blends. Macromolecular Materials and Engineering, 287, 363-372. https://doi.org/10.1002/1439-2054(20020501)287:5%3C363::AID-MAME363%3E3.0.CO;2-D
Righetti, M.C. and Di Lorenzo, M. L. (2011) Melting Temperature Evolution of Non-Reorganized Crystals. Poly(3-Hydroxybutyrate). Thermochimica Acta, 512, 59-66. https://doi.org/10.1016/j.tca.2010.08.023
Ten, E., Jiang, L., M.P. and Wolcott, M.P. (2012) Crystallization Kinetics of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate)/Cellulose Nanowhiskers Composites. Carbohydrate Polymers, 90, 541-550. https://doi.org/10.1016/j.carbpol.2012.05.076
Modi, S., Koelling, K. and Vodovotz, Y. (2013) Assessing the Mechanical, Phase Inversion, and Rheological Properties of Poly-[(R)-3-Hydroxybutyrate-Co-(R)-3-Hydroxyvalerate] (PHBV) Blended with Poly-(l-Lactic Acid) (PLA). European Polymer Journal, 49, 3681-3690. https://doi.org/10.1016/j.eurpolymj.2013.07.036