Research Progress of Additive Manufacturing Technology in Energetic Material Field at Home and Abroad
- 1 Queen Mary University of London Engineering School, Northwestern Polytechnical University, Xi’an, China
Abstract
As a subversive manufacturing technology, additive manufacturing technology has many technical advantages such as high freedom of design and not limited by complex structure of parts. The application of additive manufacturing technology to the charge molding of energetic materials will subvert the traditional manufacturing concept of energetic materials, realize the advanced charge design concept, shorten the research and development time of weapons and equipment, and improve the comprehensive performance of weapons and equipment, which is of great significance for the rapid development of high-tech weapons and equipment. This paper analyzes the research progress of additive manufacturing technology in the field of energetic materials at home and abroad and puts forward some suggestions for future research of this technology.
- Mortaral, H.J., et al. (2009) Proposed Classification Scheme for Direct Writing Technologies. Rapid Prototyping Journal, 15, 299-309. https://doi.org/10.1108/13552540910979811
- Cesarano, J., Segalman, R. and Calvert, P. (1998) Robocasting Provides Moldless Fabrication from Slurry Deposition. Ceramics Industry, 148, 94-102.
- Mohamed, O.A., Masood, S.H. and Bhowmik, J.L. (2015) Optimization of Fused Deposition Modeling Process Parameters: A Review of Current Research and Future Prospects. Advances in Manufacturing, 3, 42-53. https://doi.org/10.1007/s40436-014-0097-7
- Wang, X., Jiang, M., Zhou, Z., et al. (2017) 3D Printing of Polymer Matrix Composite: A Review and Prospective. Composites Part B: Engineering, 110, 442-458. https://doi.org/10.1016/j.compositesb.2016.11.034
- Van Driel, C.A., Siraathof, M.H. and Vanlingen, J.N.J. (2017) Developments in Additive Manufacturing of Energetic Materials at TNO. In: 30th International Symposium on Ballistics, Destech Publications, Long Beach. https://doi.org/10.12783/ballistics2017/16867
- Mcciain, M.S., Gunduz, I.E. and Son, S.F. (2018) Additive Manufacturing of Ammonium Perchorate Composite Propellant with High Solids Loadings. Proceedings of the Combustion Institute, 37, 3135-3142. https://doi.org/10.1016/j.proci.2018.05.052
- Ronald, D.J. (2016) Solid Fuel Grain for a Hybrid Propulsion System of a Rocket and Method for Manufacturing Same. US, 9453479.
- Chandru, R.A., Balasubramanlian, N., Oommen, C., et al. (2018) Additive Manufacturing of Solid Rocket Propellant Grains. Journal of Propulsion and Power, 34, 1-4. https://doi.org/10.2514/1.B36734
- Monogarov, K.A., Fomenkov, I.V. and Pivkina, A.N. (2022) FDM 3D Printing of Combustible Structures: First Results. Mendeleev Communications, 32, 228-230. https://doi.org/10.1016/j.mencom.2022.03.025
- Gao, Y.C., Yang, W.T., Hu, R., et al. (2021) Validation of CL-20-Based Propellant Formulations for Photopolymerization 3D Printing. Propellants, Explosives, Pyrotechnics, 46, 1844-1848. https://doi.org/10.1002/prep.202100196
- Yang, W.T., Hu, R., Zheng, L., et al. (2020) Fabrication and Investigation of 3D-Printed Gun Propellants. Materials & Design, 192, Article 108761. https://doi.org/10.1016/j.matdes.2020.108761
- Fleck, J.T., Murray, K.A., Gunduz, E.I., et al. (2017) Additive Manufacturing of Multifunctional Reactive Materials. Additive Manufacturing, 17, 176-182. https://doi.org/10.1016/j.addma.2017.08.008