Study on Key Joining Technology and Test Method of Steel/Al Hybrid Structure Body-in-White
- 1 Planning Technology Center, FAW-Volkswagen Automotive Co., Ltd., Changchun, China
- 2 Planning Technology Center, FAW-Volkswagen Automotive Co., Ltd., Changchun, China
- 3 Planning Technology Center, FAW-Volkswagen Automotive Co., Ltd., Changchun, China
Abstract
<div style="text-align:justify;"> Green and low carbon promote the application and development of light-weight materials in body-in-white. Large-scale die-casting Al alloy (DCAA) and high-strength thermo-formed steel sheet (TFSS) have put forward higher requirements for the application of joining technology of high-strength steel/Al dissimilar materials. Taking the new die-casting Al alloy body as an example, this paper systematically studies the progress of the latest joining methods of steel/Al dissimilar material with combination of two-layer plate and three-layer plate. By analyzing the joining technologies such as FSPR, RES, FDS and SPR, the technology and process characteristics of steel/Al dissimilar material joining are studied, and the joining technical feasibility and realization means of different material combination of the body are analyzed. The conditions of material combination, material thickness, material strength, flange height, preformed holes and joint spacing for achieving high-quality joining are given. The FSPR joining technology is developed and tested in order to meet with the joining of parts with DCAA and TFSS, especially for the joining of three-layer plates with them. It finds the method and technical basis for the realization of high quality joining of dissimilar materials, provides the early conditions for the application of large DCAA and TFSS parts in body-in-white, and meets the design requirements of new energy body. </div>
- Hörhold, R., Mueller, M., Merklein, M., et al. (2016) Mechanical Properties of an Innovative Shear-Clinching Technology for Ultra-High-Strength Steel and Aluminium in Lightweight Car Body Structures. Welding in the World, 60, 613-620. https://doi.org/10.1007/s40194-016-0313-0
- Han, L.J. and Lin, P.Y. (2019) Principles and Application of RES Welding Technology. China Welding, 28, 50-55. https://doi.org/10.12073/j.cw.20190128001
- Zhao, H., Han, L., Liu, Y.P., et al. (2022) Analysis of Joint Formation Mechanisms for Self-Piercing Riveting (SPR) Process with Varying Joining Parameters. Journal of Manufacturing Processes, 73, 668-685. https://doi.org/10.1016/j.jmapro.2021.11.038
- Namsu, P. Kim, S. and Kim, M. (2023) Self-Piercing Rivet Joining of Multi-Material Including CFRP: Experiments and FE Modeling. Composite Structures, 321, Article ID: 117341. https://doi.org/10.1016/j.compstruct.2023.117341
- Li, F., Sui, X.C. and Xu, P. (2015) Effects of Process Conditions on the Matched Cold-Pressing Joining Quality between Dissimilar Sheets. The International Journal of Advanced Manufacturing Technology, 76, 1837-1843. https://doi.org/10.1007/s00170-014-6414-2
- Karathanasopoulos, N., Pandya, K.S. and Mohr, D. (2021) Experimental and Numerical Investigation of the Role of Rivet and Die Design on the Self-Piercing Riveting Joint Characteristics of Al and Steel Sheets. Journal of Manufacturing Processes, 69, 290-302. https://doi.org/10.1016/j.jmapro.2021.07.049
- Kim, W.Y. (2014) Design of Helical Self-Piercing Rivet for Joining Al Alloy and High-Strength Steel Sheets. Transactions of the Ko-rean Society of Mechanical Engineers - A, 38, 735-742. https://doi.org/10.3795/KSME-A.2014.38.7.735
- Huang, Z.C., Zhou, Z.J. and Huang, W. (2010) Mechanical Behaviors of Self-Piercing Riveting Joining Dissimilar Sheets. Advanced Materials Research, 905, 3932-3935. https://doi.org/10.4028/www.scientific.net/AMR.97-101.3932
- Liu, Y.P., Ma, Y.W. and Lou, M. (2023) Flow Drill Screw (FDS) Technique: A State-of-the-Art Review. Journal of Manufacturing Processes, 103, 23-52. https://doi.org/10.1016/j.jmapro.2023.08.016
- Mori, K. Abe, Y. and Kato, T. (2013) Self-Pierce Riveting of Multiple Steel and Aluminium Alloy Sheets. Journal of Materials Processing Technology, 214, 2002-2008. https://doi.org/10.1016/j.jmatprotec.2013.09.007
- Abe, Y., Kato T., Mori, K., et al. (2008) Self-Piercing Riveting of High Tensile Strength Steel and Aluminium Alloy Sheets Using Conventional Rivet and Die. Journal of Materials Processing Technology, 8, 3914-3922. https://doi.org/10.1016/j.jmatprotec.2008.09.007