Selective Laser Melting of Novel SiC and TiC Strengthen 7075 Aluminum Powders for Anti-Cracks Application
- 1 Department of Materials Science and Engineering, UTBM, Belfort, France
- 2 Department of Materials Science and Engineering, UTBM, Belfort, France
Abstract
The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intricate metallic components, particularly in the case of aluminum alloys like Al-Si-Mg. Nevertheless, the production of high-strength AA7075 by SLM is challenging because of its susceptibility to heat cracking and elemental vaporization. In this study, AA7075 powders were mechanically mixed with SiC and TiC particles. Subsequently, this new type of AA7075 powder was effectively utilized in green laser printing to create solid components with fine-grain strengthening microstructures consisting of equiaxial grains. These as-printed parts exhibit a tensile strength of up to 350 MPa and a ductility exceeding 2.1%. Hardness also increases with the increasing content of mixed powder, highlighting the essential role of SiC and TiC in SLM for improved hardness and tensile strength performance.
- Yap, C.Y., Chua, C.K., Dong, Z.L., Liu, Z.H., Zhang, D.Q., Loh, L.E. and Sing, S.L. (2015) Review of Selective Laser Melting: Materials and Applications. Applied Physics Reviews, 2, 4. https://doi.org/10.1063/1.4935926
- Das, S., Fuesting, T.P., Danyo, G., Brown, L.E., Beaman, J.J. and Bourell, D.L. (2000) Physical Aspects of Process Control in Selective Laser Sintering of Metals. Materials & Design, 21, 63-73.
- Hao, L., Dadbakhsh, S., Seaman, O. and Felstead, M. (2009) Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development. Journal of Materials Processing Technology, 209, 5793-5801. https://doi.org/10.1016/j.jmatprotec.2009.06.012
- Yuan, J., Zuo, M., Sokoluk, M., Yao, G., Pan, S. and Li, X. (2020) Nanotreating High-Zinc Al-Zn-Mg-Cu Alloy by TiC Nanoparticles. Springer International Publishing, Cham, 318-323. https://doi.org/10.1007/978-3-030-36408-3_46
- Sokoluk, M., Yuan, J., Pan, S. and Li, X. (2021) Nanoparticles Enabled Mechanism for Hot Cracking Elimination in Aluminum Alloys. Metallurgical and Materials Transactions A, 52, 3083-3096. https://doi.org/10.1007/s11661-021-06302-9
- Todd, I. (2017) No More Tears for Metal 3D Printing. Nature, 549, 342-343. https://doi.org/10.1038/549342a
- Sokoluk, M., Cao, C., Pan, S. and Li, X. (2019) Nanoparticle-Enabled Phase Control for Arc Welding of Unweldable Aluminum Alloy 7075. Nature Communications, 10, 98. https://doi.org/10.1038/s41467-018-07989-y
- Pan, S., Jin, K., Wang, T., Zhang, Z., Zheng, L. and Umehara, N. (2022) Metal Matrix Nanocomposites in Tribology: Manufacturing, Performance, and Mechanisms. Friction, 1-39.
- Zhou, S.Y., Su, Y., Wang, H., Enz, J., Ebel, T. and Yan, M. (2020) Selective Laser Melting Additive Manufacturing of 7xxx Series Al-Zn-Mg-Cu Alloy: Cracking Elimination by Co-Incorporation of Si and TiB2. Additive Manufacturing, 36, Article ID: 101458. https://doi.org/10.1016/j.addma.2020.101458
- T.C. Zheng, S.H. Pan, N. Murali, B.B. Li, X.C. Li (2022) Selective Laser Melting of Novel 7075 Aluminum Powders with Internally Dispersed TiC Nanoparticles. Materials Letters, 319, Article ID: 132268. https://doi.org/10.1016/j.matlet.2022.132268
- Li, S.S., Qiu, F., Yang, H.Y., Liu, S., Liu, T.S., Chen, L.Y. and Jiang, Q.C. (2022) Strengthening of Dislocation and Precipitation for High Strength and Toughness Casting Al-Zn-Mg-Cu Alloy via Trace TiB2 + TiC Particles. Materials Science and Engineering: A, 857, Article ID: 144107. https://doi.org/10.1016/j.msea.2022.144107