Quantifying Corrosion Rate in Oil and Gas Wells by Measuring Alloying Constituents in Produced Water
- 1 Southern Area Oil Operation Technical Support Department, Saudi Aramco, Dhahran, KSA
- 2 Southern Area Oil Operation Technical Support Department, Saudi Aramco, Dhahran, KSA
- 3 Southern Area Oil Operation Technical Support Department, Saudi Aramco, Dhahran, KSA
Abstract
Most oil and gas wells worldwide are completed with low alloy carbon steel due to cost-effectiveness, despite its high susceptibility to corrosion. Corrosion in alloy steels occurs through galvanic or electrolytic reactions, resulting in the release of metallic ions. This release adversely affects the strength and integrity of production tubing. The current study focused on quantifying the amount of alloying constituents present in the produced waters of oil and gas wells using inductively coupled plasma-optical emission spectroscopy (ICP-OES) to calculate the corrosion rate on the production tubing. Two types of alloy steel tubing, API 5CT T-95 and API 5CT J55, were selected. The wells were chosen based on sweet and sour production. The levels of ions present in the produced water—Nickel, Chromium, Manganese, Molybdenum, and Iron—were measured. Ion dissolution was converted to corrosion rate using the exposed area of the tubing and the water flow rate. The study concluded that a very high corrosion rate occurs in sweet wells completed with T-95 metallurgy, whereas the corrosion rate in sour gas producers is significantly less compared to sweet producers. For the oil wells, although they are sour producers, a very low corrosion rate was observed with API 5CT J55 metallurgy. Furthermore, the study revealed that quantifying the alloying constituents in produced water is key to developing suitable corrosion projection approaches, predicting the service life of production tubing in gas and oil wells and metallic structures, and guiding production engineers to make informed decisions and timely responses to corrosion threats before failure.
- Ameh, E.S. and Ikpeseni, S.C. (2018) Pipelines Cathodic Protection Design Methodologies for Impressed Current and Sacrificial Anode Systems. Nigerian Journal of Technology , 36, 1072-1077. https://doi.org/10.4314/njt.v36i4.12
- Jubb, A.M., Engle, M.A., Chenault, J.M., Blondes, M.S., Danforth, C.G., Doolan, C., et al . (2020) Direct Trace Element Determination in Oil and Gas Produced Waters with Inductively Coupled Plasma-Optical Emission Spectrometry: Advantages of High-Salinity Tolerance. Geostandards and Geoanalytical Research , 44, 385-397. https://doi.org/10.1111/ggr.12316
- Turner, B. (2007) Macedonia. In: The Stateman ’ s Yearbook , Palgrave Macmillan UK, 810-813. https://doi.org/10.1007/978-1-349-74024-6_212
- Choi, H.J., Al-Tammar, J.I., Zbitowsky, R.L. and Ginest, N.H. (2010) Field Corrosion Investigation of API 5CT T-95 Carbon Steel Production Tubing in Sweet and Sour Gas Wells in Saudi Arabia. 13 th Middle East Corrosion Conference and Exhibition , Manama, 14-17 February 2010.
- Sammimi, A. (2012) Causes of Increased Corrosion in Oil and Gas Pipelines in the Middle East. International Journal of Basic and Applied Sciences , 1, 572-577.
- Agarwal, S., Kumar, S., Agarwal, M. and Kamal, M. (2015) Corrosion: A General Review. Internal Conference of Advance Research and Innovation , India, 17-18 November 2015, 181-183.
- Choudhary, S., Ogle, K., Gharbi, O., Thomas, S. and Birbilis, N. (2022) Recent Insights in Corrosion Science from Atomic Spectroelectrochemistry. Electrochemical Science Advances , 2, Article e2100196. https://doi.org/10.1002/elsa.202100196
- Engle, M.A., Reyes, F.R., Varonka, M.S., Orem, W.H., Ma, L., Ianno, A.J., et al . (2016) Geochemistry of Formation Waters from the Wolfcamp and “Cline” Shales: Insights into Brine Origin, Reservoir Connectivity, and Fluid Flow in the Permian Basin, USA. Chemical Geology , 425, 76-92. https://doi.org/10.1016/j.chemgeo.2016.01.025
- Thompson, M. and Walsh, J.N. (1989) Introduction. In: Handbook of Inductively Coupled Plasma Spectrometry , Springer, 1-15. https://doi.org/10.1007/978-1-4613-0697-9_1
- Blondes, M.S., Gans, K.D., Engle, M.A., Kharaka, Y.K., Reidy, M.E., Saraswathula, V., Thordsen, J.J., Rowan, E.L. and Morrissey, E.A. (2018) U.S. Geological Survey National Produced Waters Geo-Chemical Database (Ver. 2.3, January 2018). U.S. Geological Survey Data Release. https://doi.org/ https://doi.org/10.5066/F7J964W8
- Ogle, K. (2012) Atomic Emission Spectro Electrochemistry: A New Look at the Corrosion, Dissolution & Passivation of Complex Materials Corros. Mater , 37, 58-65.