Glycidyl methacrylate (GMA) and maleic anhydride (MAH) are among the most extensively utilized reactive monomers for polymer blend modification. The matching degree between these monomers and polymer end groups directly determines the interface bonding quality and the comprehensive properties of the materials. In this paper, the differences in molecular structural characteristics, reaction thermodynamics, and reaction kinetics between GMA and MAH are systematically reviewed, with a particular focus on the differences in reaction efficiency and reaction mechanisms exhibited by the two monomers in polymer systems such as polyamide (PA), polyester (PBT/PLA/R-PET), polycarbonate (PC), polyolefins, and Acrylonitrile-Butadiene-Styrene (ABS). The interaction mechanisms and regulation strategies between these two monomers and processing aids (e.g., antioxidants, UV stabilizers, and flame retardants) are further investigated, while the reaction priority of their synergistic competition and optimized application schemes are clarified. Moreover, the application advances of GMA/MAH in fields such as automotive, electrical and electronic appliances, and packaging are summarized. Furthermore, current challenges in polymer systems—including insufficient monitoring of microscale reactions and poor compatibility with complex additive systems—are identified, and future directions such as the development of multifunctional composite compatibilizers and the optimization of green processing technologies are outlined. In turn, this work provides theoretical support and technical references for the precision selection, formulation optimization, and industrial application of GMA and MAH in polymer blend modification.
Jamaludin, N.A., et al . (2015) Mechanical and Thermal Properties of SEBS-g-MA Compatibilized PET/PC Nanocomposites. Journal of Applied Polymer Science , 132, Article No. 42356.
Duan, H., Tang, J.J., Li, C.H., et al . (2017) Influence of Compatibilizers on PC/R-PET Alloys. China Plastics Industry , 45, 31-35.
Shi, P., Tang, J. and Duan, H. (2021) Influence of Different Tougheners on the Properties of PC/PBT Alloy. Journal of Materials Science and Chemical Engineering , 9, 70-82. https://doi.org/10.4236/msce.2021.911005
Zhao, T., Yu, J., Pan, H., Zhao, Y., Zhang, Q., Yu, X., et al . (2023) Super-Tough Polylactic Acid (Pla)/Poly(butylene Succinate) (PBS) Materials Prepared through Reactive Blending with Epoxy-Functionalized PMMA-GMA Copolymer. International Journal of Biological Macromolecules , 251, Article ID: 126150. https://doi.org/10.1016/j.ijbiomac.2023.126150
Duan, H., Shi, P., Fan, Z., Liu, D. and Xia, Q. (2024) Enhancing PLA/PBAT Blends Properties with High Epoxy-Functional Polymer as a Compatibilizer. Journal of Physics : Conference Series , 2888, Article ID: 012009. https://doi.org/10.1088/1742-6596/2888/1/012009
Essabir, H., El Mechtali, F.Z., Nekhlaoui, S., Raji, M., Bensalah, M.O., Rodrigue, D., et al . (2020) Compatibilization of PA6/ABS Blend by SEBS-g-MA: Morphological, Mechanical, Thermal, and Rheological Properties. The International Journal of Advanced Manufacturing Technology , 110, 1095-1111. https://doi.org/10.1007/s00170-020-05888-5
Hu, L. and Vuillaume, P.Y. (2020) Reactive Compatibilization of Polymer Blends by Coupling Agents and Interchange Catalysts. In: Compatibilization of Polymer Blends , Elsevier, 205-248. https://doi.org/10.1016/b978-0-12-816006-0.00007-4
Chen, D., Wang, H. and Li, Y. (2017) Reactive Compatibilization: Formation of Double-Grafted Copolymers by in Situ Binary Grafting and Their Compatibilization Effect. ACS Applied Materials & Interfaces , 9, 33091-33099. https://doi.org/10.1021/acsami.7b08699
Xu, P., Zhang, C., Niu, D., Yang, W., Chen, S., Liu, T., et al . (2023) Highly Toughened Poly(lactic Acid)/Poly(butylene Adipate-Terephthalate) Blends In -Situ Compatibilized by MMA-co-GMA Copolymers with Different Epoxy Group Content. International Journal of Biological Macromolecules , 243, Article ID: 125017. https://doi.org/10.1016/j.ijbiomac.2023.125017
Anjos, E.G.R.d., Marini, J., Montagna, L.S., Montanheiro, T.L.d.A. and Passador, F.R. (2020) Reactive Processing of Maleic Anhydride-Grafted ABS and Its Compatibilizing Effect on PC/ABS Blends. Polímeros , 30, No. 4. https://doi.org/10.1590/0104-1428.09220
Debbah, I., Krache, R., Aranburu, N., Fernández, M. and Etxeberria, A. (2018) Effect of SEBS-g-MAH Addition on the Mechanical, Rheological, and Morphological Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends. Journal of Elastomers & Plastics , 50, 611-633. https://doi.org/10.1177/0095244317753652
Duan, H., Shang, X., Wu, X., Ma, L., Xing, C. and Zhu, J. (2025) Epoxy-Based Chain Extenders in Polylactic Acid (PLA): A Comprehensive Review of Structure, Performance, and Challenges. Journal of Materials Science and Chemical Engineering , 13, 20-44. https://doi.org/10.4236/msce.2025.131003
Joynal Abedin, F.N., Fizal, A.N.S., Alkarkhi, A.F.M., Khalil, N.A., Ahmad Yahaya, A.N., Hossain, M.S., et al . (2024) Synergistic Reinforcement with SEBS-g-MAH for Enhanced Thermal Stability and Processability in GO/rGO-Filled PC/ABS Composites. Polymers , 16, Article No. 2554. https://doi.org/10.3390/polym16182554
Zeng, J.B., Li, K.A. and Du, A.K. (2015) Compatibilization Strategies in Poly(lactic Acid)-Based Blends. RSC Advances , 5, 32546-32565. https://doi.org/10.1039/c5ra01655j
Bubmann, T., Seidel, A., Ruckdäschel, H. and Altstädt, V. (2021) Transparent PC/PMMA Blends with Enhanced Mechanical Properties via Reactive Compounding of Functionalized Polymers. Polymers , 14, Article No. 73. https://doi.org/10.3390/polym14010073
Ryu, S.C., Kim, J.Y. and Kim, W.N. (2018) Relationship between the Interfacial Tension and Compatibility of Polycarbonate and Poly(acrylonitrile-butadiene-styrene) Blends with Reactive Compatibilizers. Journal of Applied Polymer Science , 135, Article No. 46418. https://doi.org/10.1002/app.46418
Zhang, W., Gomez, E.D. and Milner, S.T. (2017) Predicting Flory-Huggins χ from Simulations. Physical Review Letters , 119, Article No. 17801. https://doi.org/10.1103/physrevlett.119.017801
Yeung, C. and Herrmann, K.A. (2002) Molecular Dynamics Simulation of Reactive Compatibilization of Polymer Blends. Macromolecules , 36, 229-237. https://doi.org/10.1021/ma021229x
Zakizadeh, M., Jalali-Aarani, A. and Garmabi, H. (2025) Experimental Investigation and Molecular Dynamic Simulation of In -Situ Compatibilization of Biodegradable PLA/PBAT Blend as a Shape Memory Material. Journal of Polymers and the Environment , 33, 4713-4728. https://doi.org/10.1007/s10924-025-03677-3
Yan, Z., Ma, Z., Deng, J. and Luo, G. (2021) Mechanism and Kinetics of Epoxide Ring-Opening with Carboxylic Acids Catalyzed by the Corresponding Carboxylates. Chemical Engineering Science , 242, Article ID: 116746. https://doi.org/10.1016/j.ces.2021.116746
Tikekar, M.D., Delaney, K.T., Villet, M.C., Tree, D.R. and Fredrickson, G.H. (2022) A Phase Field Model for Dynamic Simulations of Reactive Blending of Polymers. Soft Matter , 18, 877-893. https://doi.org/10.1039/d1sm01686e
Lyu, Y., Yin, H., Chen, Y., Zhang, Q. and Shi, X. (2020) Structure and Evolution of Multiphase Composites for 3D Printing. Journal of Materials Science , 55, 6861-6874. https://doi.org/10.1007/s10853-020-04505-w
Zhou, Y.G., Zou, J.R., Wu, H.H. and Xu, B. (2019) Balance between Bonding and Deposition during Fused Deposition Modeling of Polycarbonate and Acrylonitrile-butadiene-Styrene Composites. Polymer Composites , 41, 60-72. https://doi.org/10.1002/pc.25345
Wang, Y., Li, Y., Wang, W., Lv, L., Li, C. and Zhang, J. (2019) Recycled Polycarbonate/Acrylonitrile-Butadiene-Styrene Reinforced and Toughened through Chemical Compatibilization. Journal of Applied Polymer Science , 136, Article No. 47537. https://doi.org/10.1002/app.47537
Hentati, F. and Masmoudi, N. (2024) The Impact of Injection Molding Process Parameters on Mechanical Properties and Microstructure of PC/ABS Blends Using Taguchi Approach. Polymer Bulletin , 81, 10659-10679. https://doi.org/10.1007/s00289-024-05212-1
Hentati, F., Hadriche, I., Masmoudi, N. and Bradai, C. (2019) Optimization of the Injection Molding Process for the PC/ABS Parts by Integrating Taguchi Approach and CAE Simulation. The International Journal of Advanced Manufacturing Tech nology , 104, 4353-4363. https://doi.org/10.1007/s00170-019-04283-z
Aparna, S., Purnima, D. and Adusumalli, R.B. (2016) Review on Various Compatibilizers and Its Effect on Mechanical Properties of Compatibilized Nylon Blends. Polymer - Plastics Technology and Engineering , 56, 617-634. https://doi.org/10.1080/03602559.2016.1233280
Duan, H., Zhu, C. and Fan, Z. (2023) Eliminating the Thermal Degradation of Polylactic Acid by the Modification of a Macromolecular Epoxy-type Chain Extender. Journal of Applied Polymer Science , 141, e54769. https://doi.org/10.1002/app.54769
Zhao, H., Hu, S., Xia, X., et al . (2021) Structure and Properties of Chain Extender-Compatibilized PBAT/PLA Blend Systems. Engineering Plastics Application , 49, 131.
Nishino, K., Shindo, Y., Takayama, T. and Ito, H. (2016) Improvement of Impact Strength and Hydrolytic Stability of PC/ABS Blend Using Reactive Polymer. Journal of Applied Polymer Science , 134, e44550. https://doi.org/10.1002/app.44550
Gao, T., et al . (2025) Research Progress in Modification of Polycarbonate. China Plastics , 39, 37.
Nagarajan, V., Mohanty, A.K. and Misra, M. (2017) Blends of Polylactic Acid with Thermoplastic Copolyester Elastomer: Effect of Functionalized Terpolymer Type on Reactive Toughening. Polymer Engineering & Science , 58, 280-290. https://doi.org/10.1002/pen.24566
Abdul Razak, N.C., Inuwa, I.M., Hassan, A. and Samsudin, S.A. (2013) Effects of Compatibilizers on Mechanical Properties of PET/PP Blend. Composite Interfaces , 20, 507-515. https://doi.org/10.1080/15685543.2013.811176
Vieyra, H., Molina-Romero, J.M., Calderón-Nájera, J.d.D. and Santana-Díaz, A. (2022) Engineering, Recyclable, and Biodegradable Plastics in the Automotive Industry: A Review. Polymers , 14, Article No. 3412. https://doi.org/10.3390/polym14163412
Li, S., Xiao, M., Wei, D., et al . (2009) Melt Grafting of Glycidyl Methacrylate-Styrene Multi-Monomer onto Powdered Polypropylene. Journal of East China University of Science and Technology ( Natural Science Edition ), 35, 44-50.
Wang, X., Sun, C., He, L., Liu, Y., Sun, Q., Dong, L., et al . (2024) Synthesis and Properties of a Novel Reactive and Low-Migration-Resistant Antioxidant and Its Application in Rubber Composites. ACS Omega , 9, 15401-15409. https://doi.org/10.1021/acsomega.3c10301
Al-Malaika, S. and Eddiyanto, E. (2010) Reactive Processing of Polymers: Effect of Bifunctional and Tri-Functional Comonomers on Melt Grafting of Glycidyl Methacrylate onto Polypropylene. Polymer Degradation and Stability , 95, 353-362. https://doi.org/10.1016/j.polymdegradstab.2009.11.006
You, B., Zhou, D., Liu, L., Zen, M. and Ren, X. (2013) Preparation of Hals-Functional Core-Shell Nanoparticles and Their Application in Poly(butylene Terephthalate). Polymer - Plastics Technology and Engineering , 52, 946-953. https://doi.org/10.1080/03602559.2013.763376
Kikuchi, T., Ohtake, Y. and Tanaka, K. (2012) Discoloration Phenomenon Induced by the Combination of Phenolic Antioxidants and Hindered Amine Light Stabilizers. Nippon Gomu Kyokaishi , 85, 283-288. https://doi.org/10.2324/gomu.85.283
Wang, X., Cheng, W. and Li, J. (2019) The Effect of Flame Retardants on the Flame Retardancy and Adhesion Properties of Bisphenol A Epoxy Resin. Development and Application of Materials , 34, 93-97.
Yang, X., Shi, J., Zhou, Y., et al . (2024) Enhancing the Flame Retardancy of Epoxy Resin via Phosphorus-Based Flame Retardant-Intercalated Mg-Al Hydrotalcite. Chinese Journal of Applied Chemistry , 41, No. 8.
Lin, K., Wang, L. and Deng, H. (2025) Preparation of Flame Retardant DOPO-BZA and Its Enhancement on Flame Retardancy of Epoxy Resin. Acta Materiae Compositae Sinica , 42, No. 11.
Zhang, C., Duan, H., Wan, C., Liu, C., Zhao, H. and Ma, H. (2022) Simultaneously Improving the Thermal Stability, Mechanical Properties and Flame Retardancy of Epoxy Resin by a Phosphorus/Nitrogen/Sulfur-Containing Reactive Flame Retardant. Materials Today Communications , 30, Article ID: 103108. https://doi.org/10.1016/j.mtcomm.2021.103108
Abbasi, A., Shakeri, A. and Abbasi, A. (2018) Synthesize and Characterization of Flame Retardant Copolyesters PET/Phosphorus Compound. Journal of Vinyl and Additive Technology , 25, 262-270. https://doi.org/10.1002/vnl.21688
Suwanniroj, A. and Suppakarn, N. (2022) Influence of Glycidyl Methacrylate Grafted Poly(butylene Succinate) (PBS-g-GMA) on Flame Retardancy and Mechanical Properties of Water Hyacinth Fiber/Ammonium Polyphosphate/Poly(butylene Succinate) Composites. Journal of Applied Polymer Science , 139, e53063. https://doi.org/10.1002/app.53063
Lee, H.I., Lee, H.K., Kim, D.S., Choi, S.J., Kim, S.H., Yoo, J.J., et al . (2014) Effects of the High Shear Rate Processing on the Thermal Properties of PC/ABS Blends. Polymer Korea , 38, 320-326. https://doi.org/10.7317/pk.2014.38.3.320
Song, L., Zhang, Q., Hao, Y., Li, Y., Chi, W., Cong, F., et al . (2022) Effect of Different Comonomers Added to Graft Copolymers on the Properties of PLA/PPC/PLA-g-GMA Blends. Polymers , 14, Article No. 4088. https://doi.org/10.3390/polym14194088
Wilkie, C.A. and Morgan, A.B. (2024) Fire Retardancy of Polymeric Materials. CRC Press.
Yan, J., Wang, C., Zhang, T., Xiao, Z. and Xie, X. (2024) Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers. Materials , 17, Article No. 5370. https://doi.org/10.3390/ma17215370
Song, Z., Liu, D., Xu, J., et al . (2014) Study on the Compatibility of High-Impact PET/PC Alloys. Plastics Industry , 42, 29-34.
Liu, R., Li, L., Yin, B., et al . (2010) Effect of E-MA-GMA on the Compatibility of PC/PET Blends. Synthetic Resins and Plastics , No. 1, 21-23.
Li, W., Wang, Y. and Wang, B. (2014) Effect of Transesterification Inhibition on the Properties of PC/PBT Blends. Plastics Manufacturing , No. 3, 74-80.