Research ArticleOpen AccessGoogle Scholar indexed
The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic
Department of Special Machinery, Bauman Moscow State Technical University, Moscow, Russia
Qingdao Advanced Marine Material Technology Co., Ltd, Qingdao, China
Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
Department of Special Machinery, Bauman Moscow State Technical University, Moscow, Russia
- 1 Department of Special Machinery, Bauman Moscow State Technical University, Moscow, Russia
- 2 Qingdao Advanced Marine Material Technology Co., Ltd, Qingdao, China
- 3 Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
- 4 Department of Special Machinery, Bauman Moscow State Technical University, Moscow, Russia
Journal of Materials Science and Chemical Engineering·Volume 01 (2013)·Pages 23–27·Published 30 October 2013·DOI10.4236/msce.2013.15005
Copy link · social · email
Abstract
This article presents the results of deformation-strength properties measurement and microstructural analysis of heterogeneous polymer matrix consisting of thermoset and thermoplastic polymers. Thermosetting material is a diamino-diphenil sulfon-cured epoxy oligomer. Polysulfone was used as thermoplastic material. Two different technological processes were used to obtain heterogeneous polymer matrix: the material was mixed in the block, or layered material was produced in which a layer of thermoplastic material alternated with a layer of epoxy oligomer.
KeywordsHeterogeneous MatrixPolysulfonEpoxy OlygomerInterphase BoundaryMicrostructurePolymer Composite Materials
- A. Muranov, G. Malysheva and A. Pilyugina, “The Polymeric Heterogeneous matrix for Composites,” ACM-TAA-2012, Werxham, 2012.
- M. Kerber and I. Gorbunova, “Binders for Polymeric Composite Materials,” Plastics, No. 12, 2010, pp. 14-21.