Research ArticleOpen AccessGoogle Scholar indexed
Microstructure of Carbon Fiber and Carbon Reinforced Plastic
Department of Manufacture and Repair of Motor Vehicles and Road Cars, Moscow Automobile Road State Technical University (MADI), Moscow, Russia
Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
- 1 Department of Manufacture and Repair of Motor Vehicles and Road Cars, Moscow Automobile Road State Technical University (MADI), Moscow, Russia
- 2 Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
- 3 Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China
Journal of Materials Science and Chemical Engineering·Volume 01 (2013)·Pages 28–32·Published 30 October 2013·DOI10.4236/msce.2013.15006
Copy link · social · email
Abstract
This study is the investigation of the microstructure of different types of carbon fiber. They were compared with the carbonized and graphitized fibers. Results of structural researches have been presented. It was found that the damage varies from different pollution and the damage of the monofibers. The effect of the pollution of the monofiber was determined.
KeywordsCold Curing Epoxy MatrixCarbon FiberCarbon Reinforced PlasticMicrostructure
- V. I. Kostikov, “Constructional Materials on the Basis of Carbon in Modern Equipment—Chelyabinsk: Collection of Scientific Works,” Modern Problems of Production and Operation of Carbon Production, 2005, pp. 8-11.
- V. A. Zorin and N. I. Baurova, “Influence of External Factors on the Accuracy of Diagnosing of Road-Building Cars with Use of Carbon Fibers,” Construction and Road Cars, No. 1, 2009, pp. 50-51.
- N. I. Baurova, “Diagnostirovaniye and Repair of Cars about Application Polymeric Materials,” Tekhpoligraft-sentr, 2008, 280 p.