Crystallographic Study of the TiO<sub>2</sub> Obtained by Different Synthesis Methods
- 1 División de Investigación y Posgrado, Facultad de Ingeniería, Universidad Autónoma de Querétaro, Querétaro, México;CBTis 145, San Juan del Río, Querétaro, México
- 2 División de Investigación y Posgrado, Facultad de Ingeniería, Universidad Autónoma de Querétaro, Querétaro, México
- 3 División de Investigación y Posgrado, Facultad de Ingeniería, Universidad Autónoma de Querétaro, Querétaro, México
- 4 Centro de Física Aplicada y Tecnología Avanzada, UNAM Campus Juriquilla, Querétaro, México
- 5 División de Investigación y Posgrado, Facultad de Ingeniería, Universidad Autónoma de Querétaro, Querétaro, México
Abstract
In this work, the crystal structure of titanium dioxide was studied, and the effect of the different synthesis routes on the microstructure and morphology of the nanostructures was analyzed. Samples characterization was carried out by X-ray diffraction by powders (XRD) to determine the different crystalline phases contented in the samples and using scanning electron microscopy (SEM), the morphology and topology of all samples were studied. XRD results were analyzed through Eva provided by Bruker to determine the average crystallite size. The results portrayed here showed that all the synthesis process produced anatase nanostructures with an average crystallite size smaller than 27 nm. Synthesized powders presented similar morphologies in all cases and they were homogeneous in their chemical composition.
- K. Nakata and A. Fujishima, “TiO2 Photocatalysis: Design and Applications,” Journal of Photochemistry and Photobiology C: Photochemistry Reviews, Vol. 13, No. 3, 2012, pp. 169-189. http://dx.doi.org/10.1016/j.jphotochemrev.2012.06.001
- A. Narayan-Banerjee, “The Desing, Fabrication, and Photocatalytic Utility of Nanostructured Semiconductors: Focus on TiO2-Base Nanostructures,” Nanotechnology, Science and Applications, Vol. 4, 2011, pp. 35-65. http://dx.doi.org/10.2147/NSA.S9040
- J. Mo, Y. Zhang, Q. Xu, J. Joaquin-Lamson and R. Zhao, “Photocatalytic Purification of Volatile Organic Compounds in Indoor Air: A Literature Review,” Atmospheric Environment, Vol. 43, No. 14, 2009, pp. 2229-2246. http://dx.doi.org/10.1016/j.atmosenv.2009.01.034
- A. B. Corradi, F. Bondioli and B. Focher, “Conventional and Microwave-Hydrothermal Synthesis of TiO2Nanopowders,” Journal of the American Ceramic Society, Vol. 88, No. 9, 2005, pp. 2639-2641.
- T. Suprabha, H. G. Roy, J. Thomas, K. P. Kumar and S. Mathew, “Microwave-Assited Synthesis of Titania Nanocubes, Nanospheres and Nanorodsfor Photocatalytic Dye Degradation,” Nanoscale Research Letters, Vol. 4, No. 2, 2009, pp. 144-152. http://dx.doi.org/10.1007/s11671-008-9214-5
- Q. Geng and N. Chen, “Photocatalytic Degratation of a Gaseous Benzene-Toluene Mixture in a Circulated Photocatalytic Reactor,” Chemical Engineering & Technology, Vol. 34, No. 3, 2011, pp. 400-408. http://dx.doi.org/10.1002/ceat.201000195
- A. Jena, R. Vinu, S. A. Shivashankar and G. Madras, “Microwave Assisted Synthesis of Nanostructured Titanium Dioxide with High Photocatalytic Activity,” Industrial and Engineering Chemistry Research, Vol. 49, No. 20, 2010, pp. 9636-9643. http://dx.doi.org/10.1002/ceat.201000195
- M. Lira-Cantu, A. Chafiq, J. Faissat, I. Gonzalez-Valls and Y. Yu, “Oxide/Polymer Interfaces for Hybrid and Organic Solar Cells: Anatase vs. Rutile TiO2,” Solar Energy Materials & Solar Cells, Vol. 95, No. 5, 2011, pp. 1362-1374. http://dx.doi.org/10.1016/j.solmat.2010.12.028
- K. S. Brammer, C. J. Frandsen and S. Jin, “TiO2 Nanotubes for Bone Regeneration,” Trends in Biotechnology, Vol. 30, No. 6, 2012, pp. 315-322. http://dx.doi.org/10.1016/j.tibtech.2012.02.005
- G.-T. Pan, M.-H. Lai, R.-C. Juang, T.-W. Chung and T. C.-K. Yang, “Preparation of Visible-Light-Driven Silver Vanadates by a Microwave-Assited Hydrothermal Method for the Photodegradation of Volatile Organic Vapors,” Industrial and Engineering Chemistry Research, Vol. 50, No. 5, 2011, pp. 2807-2814. http://dx.doi.org/10.1021/ie1012932