Characterization and Evaluation of Bond Strength of Dental Polymer Systems Modified with Hydroxyapatite Nanoparticles — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Characterization and Evaluation of Bond Strength of Dental Polymer Systems Modified with Hydroxyapatite Nanoparticles
Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil;Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
,
Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil;Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
,
Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
,
Institute of Science and Technology, UFVJM, Diamantina, Brazil
,
Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil
,
Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
1 Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil;Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
2 Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil;Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
3 Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
4 Institute of Science and Technology, UFVJM, Diamantina, Brazil
5 Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil
6 Department of Dentistry, Federal University of Vales do Jequitinhonha and Mucuri, Diamantina, Brazil Advanced Biomaterial Center-BioMat, UFVJM, Diamantina, Brazil
The study modifies an adhesive system with hydroxyapatite nanoparticles as load, characteriz ing it and evaluate the effectiveness of its bond to dental structure. The middle thirds of healthy premolar tooth crowns were obtained, and each crown was sectioned vertically, resulting in two sections. The sections were divided into ten groups (n = 15), in which resin composite restorations were simulated: (G1E and G1D) conventional adhesive system (SAC); (G2E and G2D) SAC modified with HAP; (G3E and G3D) Primer modified with HAP; (G4E and G4D) monocomponent adhesive system; (G5E and G5D) self-etching adhesive system. The specimens were submitted to the microshear test and characterization technique. There was statistically significant difference (Kruskal-Wallis) between the groups (p < 0.01). G3 presented the highest bond strength to enamel (64.40 MPa, ±7.36) and dentin (39.59 MPa, ±21.46). The majority of specimens were found adhesive fractures. Bond strength to enamel and dentin of the primer modified with HAP of SAC showed higher values.
A. B. Matos, C. H. C. Saraceni, M. M. Jacobs and M. Oda, “Estudo de Resistência à Tracao de Três Sistemas Adesivos Associados a Resina Composta em Superfícies Dentinárias,” Pesquisa Odontológica Brasileira, Vol. 15, 2001, pp. 161-165. http://dx.doi.org/10.1590/S1517-74912001000200014
K. L. Van Landuyt, J. Snauwaert, J. De Munck, M. Peumans, Y. Yoshida, A. Poitevin, E. Coutinho, K. Suzuki, P. Lambrechts and B. Van Meerbeeka, “Systematic Review of the Chemical Composition of Contemporary Dental Adhesives,” Biomateriais, Vol. 28, 2007, pp. 3757-3785. http://dx.doi.org/10.1016/j.biomaterials.2007.04.044
G. Inoue, T. Nikaido, M. R. Foxton and J. Tagami, “The Acid-Base Resistant Zone in Three Dentin Bonding Systems,” Dental Materials Journal, Vol. 28, 2009, pp. 717721. <br/?http://dx.doi.org/10.4012/dmj.28.717
M. Sarr, A.W. Kane, J. Vreven, A. Mina, K.L. Van Landuyt, M. Peumans, P. Lambrechts, B. Van Meerbeek and J. De Munck, “Microtensile Bond Strength and Interfacial Characterization of 11 Contemporary Adhesives Bonded to Bur-Cut Dentin,” Operative Dentistry, Vol. 35, 2010, pp. 94-104. http://dx.doi.org/10.2341/09-076-L
T. Yoshikawa, N. Wattanawongpitak, E. Cho and J. Tagami, “Effect of Remaining Dentin Thickness on Bond Strength of Various Adhesive Systems to Dentin,” Dental Materials Journal, Vol. 31, 2012, pp. 1033-1038. http://dx.doi.org/10.4012/dmj.2012-143
N. B. Suryakumari, P. S. Reddy, L. R. Surender and R. Kiran, “In Vitro Evaluation of Influence of Salivary Contamination on the Dentin Bond Strength of One-Bottle Adhesive Systems,” Contemporary Clinical Dentistry, Vol. 2, 2011, pp. 160-164. http://dx.doi.org/10.4103/0976-237X.86440
R. N. Garcia, A. E .G. Alvarez, C. E. Dias, M. A. Mazaro, T. Firmo, H. Stuker and M. Giannini, “Bond Strength of Contemporary Restorative Systems to Enamel and Dentin,” Revista Sul-Brasileira de Odontologia, Vol. 8, 2011, pp. 60-67.
A. Peutzfeldt, “Resin Composites in Dentistry: The Monomer Systems,” European Journal of Oral Science, Vol. 105, 1997, pp. 97-116. http://dx.doi.org/10.1111/j.1600-0722.1997.tb00188.x
L. M. Cavalcante, L. F. J. Schneide, L. S. Silva, A. K. Bedran-Russo and L. A. F. Pimenta, “Efeito da Ciclagem Térmica na Microinfiltracao e Microtracao de Restauracoes de Resina Composta,” Revista da Faculdade de Odontologia-UPF, Vol. 14, 2009, pp. 132-138.
J. Perdigao, “Dentin Bonding—Variables Related to the Clinical Situation and the Substrate Treatment,” Dental Material, Vol. 26, 2010, pp. 24-37. http://dx.doi.org/10.1016/j.dental.2009.11.149
M. Sadat-shojai, M. Atai, A. Nodehi and L. N. Khanlar, “Hydroxyapatite Nanorods as Novel Fillers for Improving the Properties of Dental Adhesives: Synthesis and Application,” Dental Materials, Vol. 26, 2010, pp 471-482. http://dx.doi.org/10.1016/j.dental.2010.01.005
U. Lohbauer, A. Wagner, R. Belli, C. Stoetzel, A. Hilpert, H. D. Kurland, J. Grabow and F. A. Müller, “Zirconia Nanoparticles Prepared by Laser Vaporization as Fillers for Dental Adhesives,” Acta Biomaterialia, Vol. 6, 2010, pp. 4539-4546. http://dx.doi.org/10.1016/j.actbio.2010.07.002
M. A. Ribeiro, I. X. Ferreira, R. P. Lima, A. L. A. Mariz, J. G. F. Pompeu and C. H. V. Silva, “The Insertion Technique’s Infl Uence of Composite resin on the Microleakage in Occlusal Esthetic Restorations,” Revista Odontológica Clínico Científica, Vol. 9, 2010, pp. 345-348.
H. Zhang and B. W. Darvell, “Mechanical Properties of Hydroxyapatite Whisker-Reinforced Bis-GMA-Based Resin Composites,” Dental materials, Vol. 28, 2012, pp. 824-830. http://dx.doi.org/10.1016/j.dental.2012.04.030
V. C. Leitune, F. M. Collares, R. M. Trommer, D. G. Andrioli, C. P. Bergmann and S. M. Samuel, “The Addition of Nanostructure Hydroxyapatite to an Experimental Adhesive resin,” Journal of Dentistry, Vol. 41, No. 4, 2013, pp. 321-327. http://dx.doi.org/10.1016/j.jdent.2013.01.001
A. Akhavan, A. Sodagar, F. Motjahedzadeh and K. Sodagar, “Investigating the Effect of Incorporating nanosilver/Nanohydroxyapatite Particles on the Shear Bond Strength of Orthodontic Adhesives,” Acta Odontologica Scandinavica, Vol. 71, No. 5, 2013, pp. 1038-1042. http://dx.doi.org/10.3109/00016357.2012.741699
J. Vandiver, D. Dean, N. Patel, W. Bonfield and C. Ortiz, “Nanoscale Variation in suRface Charge of Synthetic Hydroxyapatite Detected by Chemically and Spatially Specific High-Resolution Force Spectroscopy,” Biomaterials, Vol. 26, 2005, pp. 271-283. http://dx.doi.org/10.1016/j.biomaterials.2004.02.053
A. S. Khan, K. R. Hassan, S. F. Bukhari, W. Ferranti and S. L. Rehmaniu, “Structural and in Vitro Adhesion Analysis of a Novel Covalently Coupled Bioactive Composite,” Journal of Biomedical Materials Research Part B, Vol. 100, 2012, pp. 239-248. http://dx.doi.org/10.1002/jbm.b.31945
Y. Zhang and Y. Wang, “Hydroxyapatite Effect on Photopolymerization of Self Etching Adhesives with Different Aggressiveness,” Journal of Dentistry, Vol. 40, 2012, pp. 564-570. http://dx.doi.org/10.1016/j.jdent.2012.03.005
J. K. Jekel, D. L. Katz and J. G. Elmore, “Epidemiology, Biostatistics, and Preventive Medicine,” Elsevier, Philadelphia, 2001.
P. Jacques and J. Hebling, “Influence of Autoclave Sterilization of Human Teeth on Dentin Bonding,” Pesquisa Brasileira em Odontopediatria e Clínica Integrada, Vol. 6, 2006, pp. 9-13.
M. H. Santos, M. Oliveira, L. F. P. Souza, H. S. Mansur and W. L. Vasconcelos, “Synthesis Control and Characterization of Hydroxyapatite Prepared by Wet Precipitation Process,” Materials Research, Vol. 7, 2004, pp. 1-6. http://dx.doi.org/10.1590/S1516-14392004000400017
C. S. Fowler, M. L. Swartz, B. K. Moore and B. F. Rhodes, “Influence of Selected Variables on Adhesion Testing,” Dental Materials, Vol. 8, 1992, pp. 265-269. http://dx.doi.org/10.1016/0109-5641(92)90097-V
J. Perdigao, “Effect of Substrate Age and Adhesive Composition on Dentin Bonding,” Operative Dentistry, Vol. 38, 2012.
Y. Liu, Y. Tan, T. Lei, Q. Xiang, Y. Han and B. Huang, “Effect of Porous Glass-Ceramic Fillers on Mechanical Properties of Light-Cured Dental Resin Composites,” Dental Materials, Vol. 25, 2009, pp. 709-715. http://dx.doi.org/10.1016/j.dental.2008.10.013
T. F. Boing, G. M. Gomes, C. Z. Grande, A. Reis, J. C. Gomes and O. M. M. Gomes, “Evaluation of the Degree of Conversion of a Composite Resin Using Different Surface Treatments before Final Curing,” Revista Dentística on line, Vol. 10, 2011.
H. Zhang and M. Zhang, “Effect of Surface Treatment of Hydroxyapatite Whiskers on the Mechanical Properties of Bis-GMA-Based Composites,” Biomedical Materials, Vol. 5, 2010.
B. Poptani, K. S. Gohil, J. Ganjiwale and M. Shukla, “Microtensile Dentin Bond Strength of Fifth with Five Seventh-Generation Dentin Bonding Agents after Thermocycling: An in Vitro Study,” Contemporary Clinical Dentistry, Vol. 3, 2012, pp. 167-171. http://dx.doi.org/10.4103/0976-237X.101079
A. O. Spazzin, B. Carlini Júnior, R. R. Moraes and M. F. Mesquita, “Bonding to Wet and Dry Dentin: Microtensile Bond Strength and Marginal Leakage,” Revista de Odontologia da UNESP, Vol. 37, 2008, pp. 91-96.
T. K. Vaidyanathan and J. Vaidyanathan, “Recent Advances in the Theory and Mechanism of Adhesive Resin Bonding to Dentin: A Critical Review,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 88, 2009, pp. 558-578. http://dx.doi.org/10.1002/jbm.b.31253
P. Senawongse, C. Harnirattisai, Y. Shimada and J. Tagami, “Effective Bond Strength of Current Adhesive Systems on Deciduous and Permanent Dentin,” Operative Dentistry, Vol. 29, 2004, pp. 196-202.
P. Banks and B. Thiruvenkatachari, “Long-Term Clinical Evaluation of Bracket Failure with a Self-Etching Primer: A Randomized Controlled Trial,” Journal of Orthodontics, Vol. 34, 2007, pp. 243-251. http://dx.doi.org/10.1179/146531207225022293
M. A. Montasser, J. L. Drummond, J. R. Roth, L. AlTurki and C. A. Evans, “Rebonding of Orthodontic Brackets. Part II, an XPS and SEM Study,” Angle Orthodontist, Vol. 78, 2008, pp. 537-44. http://dx.doi.org/10.2319/022707-102.1
A. Manabe, M. Kanehira, W. J. Finger, H. Hisamitsu and M. Komatsu, “Effects of Opacity and Oxygen Inhibition of Coating Resin Composites on Bond Strength to Enamel,” Dental Materials Journal, Vol. 28, 2009, pp. 552557. http://dx.doi.org/10.4012/dmj.28.552
C. Elliot, “Structure and Chemistry of the Apatites and other Calcium Orthophosphates: Studies in Inorganic Chemistry 18,” Elsevier Science, 1994.
T. Arao and N. Nakabayashi, “Effect of Miniaturized Dumbbell-Shaped Specimen to Identify Bonding of Resin to Bovine Dentin,” Journal Japanese of Dental Materials, Vol. 16, 1997, pp. 175-181.
H. Sano, T. Shono, H. Sonoda, T. Takatsu, B. Ciucchi and R. M. Carvalho, “Relationship between Surface Area for Adhesion and Tensile Bond Strength-Evaluation of a Microtensile Bond Test,” Dental Materials, Vol. 10, 1994, pp. 236-240. http://dx.doi.org/10.1016/0109-5641(94)90067-1
International Organization for Standardization. ISO/ TC106 (TR 11405): Dental Materials—Testing of Adhesion to Tooth Structure, Geneva, 2003.
B. D. Cullity and S. R. Stock, “Elements of X-Ray Diffraction,” Prentice Hall, New Jersey, 2001.
M. H. Santos and H. S. Mansur, “Low-Cost Processing Technology for the Synthesis of Calcium Phosphates/ Collagen Biocomposites for Potential Bone Tissue Engineering Applications,” Materials Research, Vol. 10, 2007, pp. 431-436. http://dx.doi.org/10.1590/S1516-14392007000400018
M. H. Santos, L. G. D. Heneine and H. S. Mansur, “Synthesis and Characterization of Calcium Phosphate/Collagen Biocomposites Doped With Zn2+,” Materials Science and Engineering C, Vol. 28, 2008, pp. 563-571. http://dx.doi.org/10.1016/j.msec.2007.07.002
D. L. Paiva, G. M. Lampman, G. S. Kriz and J. R. Vyvyan, “Introduction to Spectroscopy,” Cengage Learning, Estados Unidos, 2009.
T. S. Jafarzadeh Kashi, M. M. Erfan and D. C. Watts, “Effect of Water on HEMA Conversion by FT-IR Spectroscopy,” Journal of Dentistry of Tehran University of Medical Sciences, Vol. 4, 2007, pp. 123-129.