Addition of Pyridine to Dye-Sensitized Solar Cell Including Fluorinated Oligomer Gel Electrolyte
- 1 Department of Electrical and Computer Engineering, Akashi College of Technology, Akashi, Japan
- 2 Akashi College of Technology, Akashi, Japan
Abstract
Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current density. Two kinds of ionic liquids were tested: imidazolium and pyrazolium systems. The two different stages of adding pyridine to the electrolyte were considered and the amount of pyridine was studied. It was found that the electrolyte including pyrazolium ionic liquids to which pyridine was added before the mixing with fluorinated oligomer showed the highest electric conductivity, short current density and open voltage. This resulted in the highest conversion efficiency of 4%. As the amount of pyridine increased, the fill factor and the open voltage were improved at first, and then the short current density increased. If the pyridine was added more, the short current density conversely decreased.
- O’Regan, B. and Gràtzel, M. (1991) A Low-Cost, High-Efficiency Solar Cell Based on Dye-Sensitized Colloidal TiO 2 Films. Nature, 353, 737-740. http://dx.doi.org/10.1038/353737a0
- Murai, S., Mikoshiba, S. and Hayase, S. (2007) Influence of Alkyl Dihalide Gelators on Solidification of Dye-Sensitized Solar Cells. Solar Energy Materials and Solar Cells, 91, 1707-1712. http://dx.doi.org/10.1016/j.solmat.2006.12.018
- Berginc, M., Krasovec, U.O., Jankovec, M. and Topic, M. (2007) The Effect of Temperature on the Performance of Dye-Sensitized Solar Cells Based on a Propyl-Methyl-Imidazolium Iodide Electrolyte. Solar Energy Materials and Solar Cells, 91, 821-828. http://dx.doi.org/10.1016/j.solmat.2007.02.001
- Li, B., Wang, L., Kang, B., Wang, P. and Qiu, Y. (2006) Review of Recent Progress in Solid-State Dye-Sensitized Solar Cells. Solar Energy Materials and Solar Cells, 90, 549-573. http://dx.doi.org/10.1016/j.solmat.2005.04.039
- Wei, T.C., Wan, C.C. and Wang, Y.Y. (2007) Preparation and Characterization of a Micro-Porous Polymer Electrolyte with Cross-Linking Network Structure for Dye-Sensitized Solar Cell. Solar Energy Materials and Solar Cells, 91, 1892-1897. http://dx.doi.org/10.1016/j.solmat.2007.07.005
- Kyokane, J., Shima, K. and Sawada, H. (2003) Electrical Properties of Fluorinated Gel Electrolytes Using High Ionic Conducting Solution and Its Application to Secondary Battery. Thin Solid Films, 438-439, 257-261. http://dx.doi.org/10.1016/S0040-6090(03)00794-6
- Kyokane, J. and Ohmukai, M. (2013) Dye-Sensitized Solar Cell with Fluorinated Gel Electrolyte: Effect of TiO 2 Particle Size on Performance. Advances in Nanoparticles, 2, 318-322. http://dx.doi.org/10.4236/anp.2013.24043
- Ohmukai, M. and Kyokane, J. (2013) Pt Deposition on Anode Enhances the Performance of Dye-Sensitized Solar Cell with Non-Cross-Linked Gel Electrolyte. Journal of Materials Science and Chemical Engineering, 1, 16-19.
- Ohmukai, M. and Kyokane, J. (2013) LiI Enhances the Performance of Dye-Sensitized Solar Cell with Fluorinated Oligomer Gel Electrolyte. Journal of Nano Energy and Power Research, 2, 135-138. http://dx.doi.org/10.1166/jnepr.2013.1018
- Ohmukai, M. and Kyokane, J. (2014) The Effect of Ionic Liquid to Dye-Sensitized Solar Cell with Fluorinated Oligomer Electrolyte. Materials Focus, 3, 75-77. http://dx.doi.org/10.1166/mat.2014.1151
- Koops, S.E., O’Regan, B.C., Barnes, P.R.F. and Durrant, J.R. (2009) Parameters Influencing the Efficiency of Electron Injection in Dye-Sensitized Solar Cells. Journal of the American Chemical Society, 131, 2808-2818. http://dx.doi.org/10.1021/ja8091278