Research ArticleOpen AccessGoogle Scholar indexed
Comprehensive Study on Machinability of Titanium Composite
Department of Production Engineering & Metallurgy, Technical College of Engineering, Sulaimani Polytechnic University, Kurdistan Region, Iraq
- 1 Department of Production Engineering & Metallurgy, Technical College of Engineering, Sulaimani Polytechnic University, Kurdistan Region, Iraq
Journal of Materials Science and Chemical Engineering·Volume 04 (2016)·Pages 1–7·Published 1 February 2016·DOI10.4236/msce.2016.42001
Copy link · social · email
Abstract
Metal framework composites have higher mechanical properties in examination to metals over an extensive variety of working conditions. This makes them an alluring alternative in swapping metals for different building applications. The present review is a study on the influence of composite titanium on the cutting parameters, mechanical behavior, reinforcements, structure and nanostructure. This review will provide an understanding into selecting the optimum machining parameters for machining titanium composites. It’s also an attempt to give brief explanation by suitably machining the titanium composite which can be made reasonable.
KeywordsTitanium CompositeReinforcementCutting SpeedFeed RateDepth of CutSurface FinishMachinability
- Jain, P.K., Soni, S.C. and Baredar, P.V. (2014) Review on Machining of Aluminium Metal Matrix Composites. Material Science Research India, 11, 114-120. http://dx.doi.org/10.13005/msri/110204
- Bejjani, R. (2012) Machinability and Modeling of Cutting Mechanism for Titanium Metal Matrix Composites. PhD Dissertation, Mechanical Engineering Department, Polytechnic School of Montreal, Montreal.
- Kuoa, C.L., Sooa, S.L., Aspinwalla, D.K., Thomasb, W., Bradley, S., Pearsonc, D., Saoubid, R. and Leahye, W. (2014) The Effect of Cutting Speed and Feed Rate on Hole Surface Integrity in Single-Shot Drilling of Metallic-Composite Stacks. Procedia CIRP, 13, 405-410. http://dx.doi.org/10.1016/j.procir.2014.04.069
- Bejjani, R., Balazinski, M., Shi, B., Attia, H. and Kishawy, H. (2011) Machinability and Chip Formation of Titanium Metal Matrix Composites. International Journal of Advance Manufacturing System, IJAMS, 13, 1.
- Zhu, J.H., Liaw, P.K., Corum, J.M. and McCoy Jr., H.E. (1999) High-Temperature Mechanical Behavior of Ti-6Al-4V Alloy and TiCp/Ti-6Al-4V Composite. Metallurgical and Materials Transactions A, 30, 1569-1578. http://dx.doi.org/10.1007/s11661-999-0094-9
- Qin, Y.-X., Lu, W.-J., Sheng, X.-F., Yang, Z.-F. and Zhang, D. (2003) Mechanical Properties of in Situ Synthesized Titanium Matrix Composites at Elevated Temperature. Materials Transactions, 44, 2282-2287. http://dx.doi.org/10.2320/matertrans.44.2282
- Xiao, L., Lu, W.J., Qin, J.N., Zhang, D., Wang, M.M., Zhu, F. and Ji, B. (2008) High-Temperature Tensile Properties of in Situ-Synthesized Titanium Matrix Composites with Strong Dependence on Strain Rates. Journal of Materials Research, 23, 3066-3074. http://dx.doi.org/10.1557/JMR.2008.0378
- Threrujirapapong, T., Kondoh, K., Imai, H., Umeda, J. and Fugetsu, B. (2009) Mechanical Properties of a Titanium Matrix Composite Reinforced with Low Cost Carbon Black via Powder Metallurgy Processing. Materials Transactions, 50, 2757-2762. http://dx.doi.org/10.2320/matertrans.MA200906
- Shnean, Z.Y. (2012) Mechanical and Physical Properties of High Density Polyethylene Filled with Carbon Black and Titanium Dioxide. Diyala Journal of Engineering Sciences, 5, 147-159.
- Fink, A. and Kolesnikov, B. (2005) Hybrid Titanium Composite Material Improving Composite Structure Coupling. Proceedings of the European Conference on Spacecraft Structures, Materials and Mechanical Testing 2005 (ESA SP-581), Noordwijk, 10-12 May 2005.