Research ArticleOpen AccessGoogle Scholar indexed
Influence of Shot Peening on DIN 1.2714 Hot Work Tool Steel
Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
Indian Institute of Technology Bombay (IITB), Mumbai, India
Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
- 1 Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
- 2 Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
- 3 Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
- 4 Indian Institute of Technology Bombay (IITB), Mumbai, India
- 5 Kalyani Center for Technology and Innovation (KCTI), Bharat Forge Ltd., Pune, India
Journal of Materials Science and Chemical Engineering·Volume 05 (2017)·Pages 81–90·Published 4 January 2017·DOI10.4236/msce.2017.51012
Copy link · social · email
Abstract
S hot peening is one of the most popular surface enhancement technique used to improve fatigue performance of different materials. This paper focuses on to study the effect of different shot peening parameters on micro-structural and mechanical properties of DIN 1.2714 tool steel specimens. Shot peening treatments were carried out by varying shot size and peening intensity. X-ray stress analysis, micro-hardness testing and micro-structural analysis were performed to characterize these specimens. In addition, pin on disk wear testing was executed to recognize wear behavior of this shot peened tool steels. It was observed that along with compressive residual stress generation, shot peening also induces work hardening effect and modifies surface structure which are responsible for significant improvement in this tool steel.
KeywordsShot PeeningSurface Enhancement TechniquesTool Steel
- Kumar, H., Singh, S. and Kumar, P. (2013) Modified shot Peening Process—A Review. International Journal of Engineering Sciences & Emerging Technologies.
- Guagliano, M. and Vergani, L. (2015) Fatigue Crack Growth Behaviour of Nitride and Shot Peened Specimens. Via La Masa, 34-20158 Milano.
- Fouad, Y. and El Metwally, M.M. (2011) Effect of Shot Peening on High Cycling Fatigue of Al 2024-T4. International Conference on Advanced Materials Engineering, Singapore, 2011.
- Chang, S.-H., Lee, S.-C. and Tang, T.-P. (2008) Effect of Shot Peening Treatment on Forging Die Life. Materials Transactions, 49, 619-623. https://doi.org/10.2320/matertrans.MER2007622
- Abood, A.N., Saleh, A.H., Salem1, R.K., Kadhim1, G.A. and Abdullah, Z.W. (2013) Strain Life of Shot Peening AA 2024-T4. Journal of Materials Science Research, 2.
- Soady, K.A., Mellor, B.G., Shack-leton, J., Morris, A. and Reed, P.A.S. The Effect of Shot Peening on Notched Low Cycle Fatigue. School of Engineering Sciences, University of Southampton, UK.
- Vielma, A.T., Llaneza, V. and Belzunce, F.J. (2014) Shot Peening Intensity Optimization to Increase the Fatigue Life of a Quenched and Tempered Structural Steel. XVII International Colloquium on Mechanical Fatigue of Metals (ICMFM17).
- Farrahi, G.H. and Ghadbeigi, H. (2006) An Investigation into the Effect of Various Surface Treatments on Fatigue Life of a Tool Steel. Journal of Materials Processing Technology, 174, 318-324. https://doi.org/10.1016/j.jmatprotec.2006.01.014
- Harada, Y., Fukauara, K. and Kohamada, S. (2008) Effects of Microshot Peening on Surface Characteristics of High-Speed Tool Steel. Journal of Materials Processing Technology, 201. https://doi.org/10.1016/j.jmatprotec.2007.11.247
- Bhavar, V., Khot, S., Kattire, P. and Mehta, M. (2015) Effect of Deep Cryogenic Treatment (DCT) on AISI H13 Tool Steel. Proceedings of the 28th ASM Heat Treating Society Conference, Detroit, 20-22 October 2015.
- Zammit, A., Abela, S., Wagner, L., Mhaede, M. and Grech, M. (2013) Tribological Behaviour of Shot Peened Cu-Ni Austempered Ductile Iron. Wear, 302, 829-836. https://doi.org/10.1016/j.wear.2012.12.027
- Babic, M., Mitrovic, S., Adamovic, D., Dzunic, D. and Zivic, F. The Effect of Shot Peening on Tribological Behavior of Alloyed Steels. Faculty of Mechanical Engineering, Sestre Janjic 6, Kragujevac, Ser-bia.