This work investigates in-depth the effects of variation of the compositional ratio of the absorber layer in Cu(In,Ga)Se2 (CIGS) thin-film solar cells. Electrical simulations were carried out in order to propose the most suitable gallium double-grading profile for the high efficiency devices. To keep the model as close as possible to the real behavior of the thin film solar cell a trap model was implemented to describe the bulk defects in the absorber layer. The performance of a solar cell with a standard CIGS layer thickness (2 μm) exhibits a strong dependence on the front grading height (decreasing band gap toward the middle of the CIGS layer). An absolute gain in the efficiency (higher than 1%) is observed by a front grading height of 0.22. Moreover, simulation results show that the position of the plateau (the region characterized by the minimum band gap) should be accurately positioned at a compositional ratio of 20% Ga and 80% In, which corresponds to the region where a lower bulk defect density is expected. The developed model demonstrates that the length of the plateau is not playing a relevant role, causing just a slight change in the solar cell performances. Devices with different absorber layer thicknesses were simulated. The highest efficiency is obtained for a CIGS thin film with thicknesses between 0.8 and 1.1 μm.
Green, M.A., Emery, K., Hishikawa, Y., Warta, W. and Dunlop, E.D. (2017) Solar Cell Efficiency Tables (Version 51). Progress in Photovoltaics: Research and Applications, 25, 668-676. https://doi.org/10.1002/pip.2909
Green, M.A., Emery, K., Hishikawa, Y., Warta, W. and Dunlop E.D. (2015) Solar Cell Efficiency Tables (Version 46). Progress in Photovoltaics: Research and Applications, 23, 1-9. https://doi.org/10.1002/pip.2573
Niki, S., Contreras, M. Repins, I., Powalla, M., Kushiya, K., Ishizuka, S. and Matsubara, K. (2010) CIGS Absorbers and Processes. Progress in Photovoltaics: Research and Applications, 18, 453-466. https://doi.org/10.1002/pip.969
Liu, J., Zhuang, D., Luan, H., Cao, M., Xie, M. and Li, X. (2013) Preparation of Cu(In,Ga)Se2 Thin Film by Sputtering from Cu(In,Ga)Se2 Quaternary Target. Progress in Natural Science: Materials, 23, 133-138. https://doi.org/10.1016/j.pnsc.2013.02.006
Lincot D., Guillemoles, J.F., Taunier, S., Guimard, D., Sicx-Kurdi, J., Chaumont, A., Roussel, O., Ramdani, O., Hubert, C., Fauvarque, J.P., Bodereau, N., Parissi, L., Panheleux, P., Fanouillere, P., Naghavi, N., Grand, P.P., Benfarah, M., Mogensen, P. and Kerrec, O. (2004) Chalcopyrite Thin Film Solar Cells by Electrodeposition. Solar Energy, 77, 725-737. https://doi.org/10.1016/j.solener.2004.05.024
Kapur, V.K., Bansal, A., Le, P. and Asensio, O.I. (2003) Non-Vacuum Processing of CuIn1-xGaxSe2 Solar Cells on Rigid and Flexible Substrates Using Nanoparticle Precursor Ink. Thin Solid Films, 431-432, 53-57. https://doi.org/10.1016/S0040-6090(03)00253-0
Lippold, G., Neumann, H. and Schindler, A. (2001) Ion Beam Assisted Deposition of Cu(In,Ga)Se2 Films for Thin Film Solar Cells. Materials Research Society Symposia Proceedings, 668, H3.9.
Ramanathan, K., Contreras, M.A., Perkins, C.L., Asher, S., Hasoon, F.S., Keane, J., Young, D., Romero, M., Metzger, W., Noufi, R., Ward, J. and Duda, A. (2003) Properties of 19.2% Efficiency ZnO/CdS/CuInGaSe2 Thin-Film Solar Cells. Progress in Photovoltaics: Research and Applications, 11, 225-230. https://doi.org/10.1002/pip.494
Gabor, A.M., Tuttle, J.R., Albin, D.S., Contreras, M.A., Noufi, R. and Hermann, A.M. (1994) High-Efficiency CuInxGa1-xSe2 Solar Cells Made from (Inx,Ga1-x)2Se3 Precursor Films. Applied Physics Letters, 65, 198-200. https://doi.org/10.1063/1.112670
Marudachalam, M., Birkmire, R.W., Hichri, H., Schultz, J.M., Swartzlander, A. and Al-Jassim, M.M. (1997) Phases, Morphology, and Diffusion in CuInxGa1-xSe2CuInxGa1-xSe2 Thin Films. Journal of Applied Physics, 82, 2896-2905. https://doi.org/10.1063/1.366122
Pettersson, J., Platzer-Bjarkman, C., Zimmermann, U. and Edoff, M. (2011) Baseline Model of Graded-Absorber Cu(In,Ga)Se2 Solar Cells Applied to Cells with Zn1-XMgxO Buffer Layers. Thin Solid Films, 519, 7476-7480. https://doi.org/10.1016/j.tsf.2010.12.141
Lundberg, O., Edoff, M. and Stolt, L. (2005) The Effect of Ga-Grading in CIGS Thin Film Solar Cells. Thin Solid Films, 480, 520-525. https://doi.org/10.1016/j.tsf.2004.11.080
Lundberg, O., Bodegard, M., Malmstrom, J. and Stolt, L. (2003) Influence of the Cu(In,Ga)Se2 Thickness and Ga Grading on Solar Cell Performance. Progress in Photovoltaics: Research and Applications, 11, 77. https://doi.org/10.1002/pip.462
Burgelman, M., Nollet, P. and Degrave, S. (2000) Modelling Polycrystalline Semiconductor Solar Cells. Thin Solid Films, 361-362, 527-532. https://doi.org/10.1016/S0040-6090(99)00825-1
Ouédraogo, S., Zougmoré, F. and Ndjaka, J.M. (2013) Numerical Analysis of Copper-Indium-Gallium-Diselenide-Based Solar Cells by SCAPS-1D. International Journal of Photoenergy, 2013, 421076. https://doi.org/10.1155/2013/421076
Chirila, A., Buecheler, S., Pianezzi, F., Bloesch, P., Gretener, C., Uhl, A.R., Fella, C., Kranz, L., Perrenoud, J., Seyrling, S., Verma, R., Nishiwaki, S., Romanyuk, Y.E., Bilger, G. and Tiwari, A.N. (2011) Highly Efficient Cu(In,Ga)Se2 Solar Cells Grown on Flexible Polymer Films. Nature Materials, 10, 857-861. https://doi.org/10.1038/nmat3122
Jackson, P., Hariskos, D., Lotter, E., Paetel, S., Wuerz, R., Menner, R., Wischmann, W. and Powalla, M. (2011) New World Record Efficiency for Cu(In,Ga)Se2 Thin-Film Solar Cells beyond 20%. Progress in Photovoltaics: Research and Applications, 19, 894-897. https://doi.org/10.1002/pip.1078
Hashimoto, Y., Kohara, N., Negami, T., Nishitani, N. and Wada, T. (1988) Chemical Bath Deposition of Cds Buffer Layer for GIGS Solar Cells. Solar Energy Materials and Solar Cells, 50, 71-77.
Minemoto, T., Matsui, T., Takakura, H., Hamakawa, T., Negami, T., Hashimoto, Y., Uenoyama, T. and Kitagawa, M. (2001) Theoretical Analysis of the Effect of Conduction Band Offset of Window/CIS Layers on Performance of CIS Solar Cells using Device Simulation. Solar Energy Materials and Solar Cells, 67, 83-88. https://doi.org/10.1016/S0927-0248(00)00266-X
Parisi, A., Pernice, R., Rocca, V., Curcio, L., Stivala, S., Cino, A.C., Cipriani, G., Di Dio, V., Galluzzo, G.R., Miceli, R. and Busacca, A.C. (2015) Graded Carrier Concentration Absorber Profile for High Efficiency CIGS Solar Cells. International Journal of Photoenergy, 2015, Article ID: 410549. https://doi.org/10.1155/2015/410549
Pettersson, J., Torndahl, T., Platzer-Bjorkman, C., Hultqvist, A. and Edoff, M. (2013) The Influence of Absorber Thickness on Cu(In,Ga)Se2 Solar Cells with Different Buffer Layers. IEEE Journal of Photovoltaics, 3, 1376.
Wadaa, T., Kohara, N., Nishiwaki, S. and Negami, T. (2001) Characterization of the Cu(In,Ga)Se2/Mo Interface in CIGS Solar Cells. Thin Solid Films, 387, 118-122.
Kuo, S.-Y., Hsieh, M.-Y., Hsieh, D.-H. and Kuo, H.-C. (2014) Device Modeling of the Performance of Cu(In,Ga)Se2 Solar Cells with V-Shaped Bandgap Profiles. International Journal of Photoenergy, 2014, Article ID: 186579. https://doi.org/10.1155/2014/186579
Schroeder, D.J., Hernandez, J.L. and Rockett, A.A. (1997) Point Defects and Hole Transport in Epitaxial CuIn1-xGaxSe2. Proceedings of the 11th International Conference on Ternary and Multinary Compounds, Salford, 8-12 September 1997, 749-752.
Song, S.H., Nagaich, K., Aydil, E.S., Feist, R., Haley, R. and Campbell, S.A. (2010) Structure Optimization for a High Efficiency CIGS Solar Cell. 35th IEEE Photovoltaic Specialists Conference, Honolulu, 20-25 June 2010, 2488-2492.
Song, J., Li, S.S., Huang, C.H., Crisalle, O.D. and Anderson, T.J. (2004) Device Modeling and Simulation of the Performance of Cu(In1-x,Gax)Se2 Solar Cells. Solid-State Electronics, 48, 73-79.
Paulson, P.D., Birkmire, R.W. and Shafarman, W.N. (2003) Optical Characterization of CuIn1-xGaxSe2 Alloy Thin Films by Spectroscopic Ellipsometry. Journal of Applied Physics, 94, 879-888. https://doi.org/10.1063/1.1581345
Hanna, G., Jasenek, A., Rau, U. and Schock, H.W. (2001) High Quality Baseline for High Efficiency, Cu(In1-x,Gax)Se2 Solar Cells. Thin Solid Films, 387, 71-72.
Wei, S.H. and Zunger, A. (1995) Band Offsets and Optical Bowings of Chalcopyrites and Zn-Based II-VI Alloys. Journal of Applied Physics, 78, 3846. https://doi.org/10.1063/1.359901
Gorji, N.E., Perez, M.D., Reggiani, U. and Sandrolini, L. (2012) A New Approach to Valence and Conduction Band Grading in CIGS Thin Film Solar Cells. International Journal of Engineering & Technology, 4, 573-576.
Herberholz, R., Nadenau, V., Rühle, U., Koble, C., Schock, H.W. and Dimmler, B. (1997) Prospects of Wide-Gap Chalcopyrites for Thin Film Photovoltaic Modules Solar. Energy Materials and Solar Cells, 49, 227-237.
Dullweber, T., Rau, U., Contreras, M.A., Noufi, R. and Schock, H.-W. (2000) Photogeneration and Carrier Recombination in Graded Gap Cu(In,Ga)Se2 Solar Cells. IEEE Transactions on Electron Devices, 47, 2249-2254.
Gloeckler, M. and Sites, J.R. (2005) Band-Gap Grading in Cu(In,Ga)Se2 Solar Cells. Journal of Physics and Chemistry of Solids, 66, 1891-1894. https://doi.org/10.1016/j.jpcs.2005.09.087
Lundberg, O., Bodegaerd, M., Malmstroem, J. and Stolt, L. (2003) Influence of the Cu(In,Ga)Se2 Thickness and Ga Grading on Solar Cell Performance. Progress in Photovoltaics, 11, 77-88. https://doi.org/10.1002/pip.462