Preparation and process optimization of porous carbons using different carbon sources and activating agents are frequently and commonly reported in open literature. However, only scanty references are made on utilization of petroleum coke for conversion to high surface area porous carbon using KOH as the activating agent. Hence, the present work attempts a process optimization exercise to prepare high surface area porous carbon from Petroleum coke using chemical activation (KOH) utilizing design of experiments. The effect of activation temperature, petroleum coke to KOH ratio (KPR) and activation duration were assessed on the surface area and yield of the porous carbon. The process optimization was performed covering experimental parameters in the range of 500?C - 800?C, 2 - 5 and 30 - 120 min. The optimal process conditions for maximizing the yield and BET surface area was identified to be an activation temperature of 639?C, KPR of 4.5 and activation duration of 43 min, having BET surface area 1765 m 2 /g and yield of 89.8%. However, an attempt to maximize only the BET surface area, ignoring yield has resulted with a porous carbon with maximum surface area of 2061 m 2 /g, with the optimal process conditions being an activation temperature of 688?C, KPR of 3.8 and activation duration of 74 min, with the corresponding yield of only 77%. The characterization of porous carbon was performed using nitrogen adsorption isotherm, FT-IR and SEM analysis.
Suresh Kumar Reddy, K., Shoaibi, A.A. and Srinivasakannan, C (2012) A Comparison of Microstructure and Adsorption Characteristics of Activated Carbons by CO2 and H3PO4 Activation from Date Palm Pits. New Carbon Mater, 27, 344-351. https://doi.org/10.1016/S1872-5805(12)60020-1
Zhao, W., Fierro, V., Zlotea, C., Aylon, E., Izquierdo, M.T., Latroche, M. and Celzard, A. (2011) Optimization of Activated Carbon for Hydrogen Storage. Int J Hydrogen Energ, 36, 11746-11751. https://doi.org/10.1016/j.ijhydene.2011.05.181
Sentorun-Shalaby, C., Ucak-Astalioglu, M.G., Artok, L. and Sarici, C. (2006) Preparation and Characterization of Activated Carbons by One Step Steam Pyrolysis/Activation from Apricot Stones. Micropor Mesopor Mater, 88, 126-134. https://doi.org/10.1016/j.micromeso.2005.09.003
Hameed, B.H., Tan, I.A.W. and Ahmed, A.L. (2008) Optimization of Basic Dye Removal by Oil Palm Fiber-Based Activated Carbon Using Response Surface Methodology. J Hazardous Mater, 158, 324-332. https://doi.org/10.1016/j.jhazmat.2008.01.088
Pinto, F., Lopes, H., Andre, R.N., Gulyurtlu, I. and Cabrita, I. (2008) Effect of Catalyst in the Quality of Syngas and By-Products Obtained by Co-Gasification of Coal and Wastes. 2: Heavy Metals, Sulphur and Halogen Compounds Abatement. Fuel, 87, 1050-1062. https://doi.org/10.1016/j.fuel.2007.06.014
Marsh, H., Yan, D.S., O’Grady, T.M. and Wennerberg, A. (1984) Formation of Active Carbons from Cokes Using Potassium Hydroxide. Carbon, 22, 603-611. https://doi.org/10.1016/0008-6223(84)90096-4
Raymundo-Pinero, E., Azais, P., Cacciaguerra, T., Cazorla-Amoros, D., Linares-Solano, A. and Beguin, F. (2005) KOH and NaOH Activation Mechanisms of Mutiwalled Carbon Nanotubes with Different Structural Organization. Carbon, 43, 786-795. https://doi.org/10.1016/j.carbon.2004.11.005
Lee, S.H. and Choi, C.S. Chemical Activation of High Sulfur Petroleum Cokes by Alkali Metal Compounds. Fuel Process Technol, 64, 141-153. https://doi.org/10.1016/S0378-3820(00)00070-9
Rambabu, N., Azargoha, R., Dalai, A.K. and Adjaye, J. (2013) Fuel Processing Technology. 106, 501-510. https://doi.org/10.1016/j.fuproc.2012.09.019
Suresh Kumar Reddy, K., Shoaibi, A.A. and Srinivasakannan, C. (2012) Activated Carbon from Date Palm Seed: Process Optimization Using Response Surface Methodology. Waste Biomass Valor, 3, 149-156. https://doi.org/10.1007/s12649-011-9104-4
Lyubchik, S.B., Benoit, R. and Beguin, F. (2002) Influence of Chemical Modifications of Anthracite on the Porosity of the Resulting Activated Carbons. Carbon, 40, 1287-1294. https://doi.org/10.1016/S0008-6223(01)00288-3
Hameed, B.H., Salman, J.M. and Ahmad, A.L. (2009) Adsorption Isotherm and Kinetic Modeling of 2, 4-D Pesticide on Activated Carbon Derived from Date Stones. J Hazardous Mater, 163, 121-126. https://doi.org/10.1016/j.jhazmat.2008.06.069
Gonen, F. and Aksu, Z. (2008) Use of Response Surface Methodology (RSM) in the Evaluation of Growth and Copper (II) Bioaccumulation Properties of Candida Utilis in Molasses Medium. J Hazardous Mater, 154, 731-738. https://doi.org/10.1016/j.jhazmat.2007.10.086
Otowa, T., Tanibata, R. and Itoh, M. (1993) Production and Adsorption Characteristics of MAXSORB: High Surface Area Active Carbon. Gas Sep Purif, 7, 241-245. https://doi.org/10.1016/0950-4214(93)80024-Q
Lillo-Rodenas, M.A., Cazorla-Amoros, D. and Linares-Solano, A. (2003) Understanding Chemical Reactions between Carbons and NaOH and KO: An Insight into the Chemical Activation Mechanism. Carbon, 41, 267-275. https://doi.org/10.1016/S0008-6223(02)00279-8
Chiang, Y.-C., Chen, Y.-J. and Wu, C.-Y. (2017) Effect of Relative Humidity on Adsorption Breakthrough of CO2 on Activated Fibers. Materials, 10, 1296-1309. https://doi.org/10.3390/ma10111296
Tan, I.A.W., Hameed, B.H. and Ahmad, A.L. (2008) Optimization of Preparation Conditions for Activated Carbons from Coconut Husk Using Response Surface Methodology. Chem Eng J, 137, 462-470. https://doi.org/10.1016/j.cej.2007.04.031
Adinata, D., Daud, W.M.W.A. and Aroua, M.K. (2007) Preparation and Characterization of Activated Carbon from Palm Shell by Chemical Activation with K2CO3. Bioresource Technol, 98, 145-149. https://doi.org/10.1016/j.biortech.2005.11.006
Zhao, W., Fierro, V., Zlotea, C., Aylon, E., Izquierdo, M.T., Latroche, M. and Celzard, A. (2012) Impact of Synthesis Conditions of KOH Activated Carbons on Their Hydrogen Storage Capacities. Int J Hydrogen Energy, 37, 14278-14284. https://doi.org/10.1016/j.ijhydene.2012.06.110
Wang, H., Gao, Q. and Hu, J. (2009) High Hydrogen Storage Capacity of Porous Carbons Prepared by Using Activated Carbon. J Am Chem Soc., 131, 7016-7022. https://doi.org/10.1021/ja8083225
Prahas, D., Kartika, Y., Indraswati, N. and Ismadji, S. (2008) Activated Carbon from Jackfruit Peel Waste by H3PO4 Chemical Activation: Pore Structure and Surface Chemistry Characterization. Chem Eng J, 140, 32-42. https://doi.org/10.1016/j.cej.2007.08.032
Baquero, M.C., Giraldo, L., Moreno, J.C., Suraz-Garcia, F., Martinez-Alonso, A. and Tascon, J.M.D. (2003) Activated Carbons by Pyrolysis of Coffee Bean Husks in Presence of Phosphoric Acid. J Anal Appl Pyrol, 70, 779-784. https://doi.org/10.1016/S0165-2370(02)00180-8
Hebeish, A., Ramadan, M.A., Abdel-Halim, E. and Abo-Okeil, A. (2011) An Effective Adsorbent Based on Sawdust for Removal of Direct Dye from Aqueous Solutions. Clean Techn Environ Policy, 13, 713-718. https://doi.org/10.1007/s10098-010-0343-z
Salam, J.M., Njoku, V.O. and Hameed, B.H. (2011) Bentazon and Carbofuran Adsorption onto Date Seed Activated Carbon: Kinetics and Equilibrium. Chem Engg J, 173, 361-368. https://doi.org/10.1016/j.cej.2011.07.066
Guo, J., Luo, Y., Chong Lua, A., Chi, R., Chen, Y., Bao, X. and Xiang, S. (2007) Adsorption of Hydrogen Sulphide (H2S) by Activated Carbons Derived from Oil-Palm Shell. Carbon, 45, 330-336. https://doi.org/10.1016/j.carbon.2006.09.016
El-Hendawy, A.A. (2009) An Insight into the KOH Activation Mechanism through the Production of Microporous Activated Carbon for the Removal of Pb2+ Cations. Appl Surf Sci, 255, 3723-3730. https://doi.org/10.1016/j.apsusc.2008.10.034