Research ArticleOpen AccessGoogle Scholar indexed
Glass-Reinforced Plastic Filled by Multiwall Carbon Nanotubes and Their Modified Forms
Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
Department of Physics of Biological Systems, Institute of Physics, NAS of Ukraine, Kyiv, Ukraine
Department of Nanoporous and Nanosized Carbon Materials, Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine
Department of Nanoporous and Nanosized Carbon Materials, Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine
Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
- 1 Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
- 2 Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
- 3 Department of Physics of Biological Systems, Institute of Physics, NAS of Ukraine, Kyiv, Ukraine
- 4 Department of Nanoporous and Nanosized Carbon Materials, Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine
- 5 Department of Nanoporous and Nanosized Carbon Materials, Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine
- 6 Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
- 7 Transportation and Logistics College, Ningbo University of Technology, Ningbo, China
Journal of Materials Science and Chemical Engineering·Volume 07 (2019)·Pages 26–35·Published 10 July 2019·DOI10.4236/msce.2019.77004
Copy link · social · email
Abstract
The effect of modifying the surface of multiwall carbon nanotubes (CNT’s) by oxygen and nitrogen on the strength characteristics of the fiberglass filled with them was investigated by testing for tension and bending. The method of obtaining nitrogen-containing nanostructures is developed. It was shown that in the epoxide system LR285-LH286 hydrophobic CNT’s (outgoing) at introducing into the catalyst polymerization of LH286, increase the strength with respect to unreinforced CNT’s by 48% - 54%. Oxidized CNT’s (200 A?h/kg) introduced into the resin LR285 increase the strength by 59%. The distribution of the filler particles in size, both in the epoxy resin and in the catalyst, depends on their concentration nonlinear, and correlates with the strength characteristics of the composite.
KeywordsFiberglassMultiwall Carbon NanotubesPolymer Composite Materials
- Kalgin, A.V., Kalinin, Yu.E., Kudrin, A.M., Maluchenkov, A.V., Panin, Yu.V. and Sytnikov, A.V. (2011) Prospects for the Development of the Production of Aircraft Parts Made of Composite Materials. VSTU Bulletin, 112, 147-149. (In Russian)
- Savin, S.P. (2012) The Use of Modern Polymer Composite Materials in the Construction of a Glider Aircraft of the MS-21 Family. News of the Samara Scientific Center of the Russian Academy of Sciences, 4, 1-4. (In Russian)
- Zazimko, V. (2017) The Use of Composite Materials as a Driver of the Branches of the Military Industrial Complex. New Defense Order. Strategies, 2, 56-58. (In Russian)
- Cowan, T., Acar, E. and Francolin, C. (2006) Analysis of Causes and Statistics of Commercial Jet Plane Accidents between 1983 and 2003. Mechanical and Aerospace Engineering Department University of Florida, ST1, 1-15.
- Tian, Y., Zhang, H. and Zhang, Z. (2017) Influence of Nanoparticles on the Interfacial Properties of Fiber-Reinforced-Epoxy Composites. Composites: Part A, 98, 1-8. https://doi.org/10.1016/j.compositesa.2017.03.007
- Scarselli, G., Corcione, C., Nicassio, F. and Maffezzoli, A. (2017) Adhesive Joints with Improved Mechanical Properties for Aerospace Applications. International Journal of Adhesion and Adhesives, 75, 174-180. https://doi.org/10.1016/j.ijadhadh.2017.03.012
- Lin, F., Yang, C., Zeng, Q.H. and Xiang, Y. (2018) Morphological and Mechanical Properties of Graphene-Reinforced PMMA Nanocomposites Using a Multiscale Analysis. Computational Materials Science, 150, 107-120. https://doi.org/10.1016/j.commatsci.2018.03.048
- Liang, M. and Wong, K.L. (2017) Study of Mechanical and Thermal Performances of Epoxy Resin Filled with Micro Particles and Nanoparticles. Energy Procedia, 110, 156-161. https://doi.org/10.1016/j.egypro.2017.03.121
- Irez, A.B., Bayraktar, E. and Miskioglu, I. (2017) Design and Mechanical-Physical Properties of Epoxy-Rubber Based Composites Reinforced with Nanoparticles. Procedia Engineering, 184, 486-496. https://doi.org/10.1016/j.proeng.2017.04.119
- Eesaee, M. and Shojaei, A. (2014) Effect of Nanoclays on the Mechanical Properties and Durability of Novolac Phenolic Resin/Woven Glass Fiber Composite at Various Chemical Environments. Composites: Part A, 63, 149-158. https://doi.org/10.1016/j.compositesa.2014.04.008
- Anbusagar, N.R.R., Palanikumar, K. and Giridharan, P.K. (2015) Study of Sandwich Effect on Nanoclay Modified Polyester Resin GFR Face Sheet Laminates. Composite Structures, 125, 336-342. https://doi.org/10.1016/j.compstruct.2015.02.016