Research ArticleOpen AccessGoogle Scholar indexed
Stoneware Ceramic Synthesis with Iron Sand as a Filler Material
Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
Technical Implementation Unit of the Laboratory of the Agency for the Assessment and Application of Technology, Center for Creative Ceramics Industry Technology, Bali, Indonesia
Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
- 1 Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
- 2 Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
- 3 Technical Implementation Unit of the Laboratory of the Agency for the Assessment and Application of Technology, Center for Creative Ceramics Industry Technology, Bali, Indonesia
- 4 Department of Physics, Faculty of Mathematics and Natural Sciences, Udayana University, Badung, Indonesia
Journal of Materials Science and Chemical Engineering·Volume 07 (2019)·Pages 42–51·Published 5 August 2019·DOI10.4236/msce.2019.78006
Copy link · social · email
Abstract
In an effort to explore the use of natural resources, stoneware ceramics have been made using iron sand as a filler to replace quartz Kalimantan. The results showed that iron sand can be well used in making stoneware ceramics. This is shown by the measurement of water absorption which is less than 5% and has compressive strength slightly smaller compared to stoneware ceramics made with quartz as a filler.
KeywordsStoneware CeramicsIron SandQuartzPressure StrengthWater Absorption
- Budiyanto, W. (2014) Pengembangan Formula Badan Keramik Stoneware dengan Metode Line Blend, Kriya Keramik PPPPTK Seni Budaya, Sleman Yogyakarta.
- Oishi, T. (1986) Ceramics Body, Gifu Prefecture Ceramics Research Institute Nagoya, International Training Center. Japan International Cooperation Agency.
- Alexander, B. (2001) Panduan Praktis Kamus Keramik Untuk Praktisi, Perajin dan Industri. Milenia Populer, Australia—Indonesia, Jakarta.
- Mason, B. and Moore, C.B. (1982) Principles of Geochemistry. Ellis Horwod Limited, New York.
- Lawrence, W.G. and West, R.R. (1982) Ceramics Science for Potter. Chilton Book Company, Radnor.
- Miller, J.C. (1998) Statistics for Analytical Chemistry. Ellis Horwod Limited, New York.
- Sujana, G.A.P.P., Suardana, P. and Nugroho, T. (2019) The Effect of Firing Temperature on Water Absorption and Flexural Strength on the Preparation of Stoneware Ceramic (Coded-BL1P). Buletin Fisika, 20, 25-28.
- Sundari, K.N. (2010) Pengaruh Perlakuan Suhu Bakar pada Masa Bodi Keramik Stoneware Kode BL-1 Terhadap Parameter Penyusutan dan Peresapan Air. Majalah Ilmiah Pengkajian Industri, 4, 31-36.
- IS 13630 (2006) Indian Standard Ceramic Tiles—Methods of Test, Sampling and Basis for Acceptance: Part 2. Determination of Water Absorption and Bulk Density, Bureau of Indian Standards. Manak Bhavan, New Delhi.
- Hadi, S. (2016) Teknologi Bahan, ANDI Yogyakarta.
- Chicot, D. and Tricoteaux, A. (2010) Mechanical Properties of Ceramics by Indentation: Principle and Applications in Ceramic Materials. Sciyo, Cap. 7, 116-154.