ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss…
Chengjun Jiang, Lin Cheng, Guilin Cheng
The kinetics of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)-catalyzed aldol condensation of furfural with acetone was investigated under free solvent conditions from 50℃ - 90℃. The highest yield of 1,4-pentandien-3-on-1,5-di-furanyl catalyzed by DBU reached 98.0…
Lyuji Ozawa
The coil-EEFL lamps, which are operated with DC driving circuit, have studied. The figure of the merit of the coil-EEFL lamps is the quantum efficiency (η q ) that is given by the emitted visible photons by one moving electron in the FL lamp. The electrons in…
Shaoguang Dong, Junhuo Zhuang, Yaguang Zeng
Al-induced crystallization yields the larger grain and (111)-orientation planes of poly-Ge thin film grown on SiO 2 substrate, the (111)-orientation planes of poly-Ge thin film grown on SiO 2 substrate are very important for the superior performance electroni…
Byung-Geon Park
Eu 2+ , Dy 3+ -doped SrAl2O4 was prepared by a hydrothermal reaction through the process of calcination at lower temperature. The physicochemical properties of the SrAl 2 O 4 : Eu 2+ , Dy 3+ phosphor were characterized and compared to those of the SrAl 2 O 4…
Dan Wang, Changyuan Lu, Xingli Zou, Kai Zheng, Zhongfu Zhou, Xionggang Lu
The electrolytic production of nickel-copper alloy by electrochemical reduction of converter matte in molten salt has been investigated. The sintered solid porous pellets of Ni 3 S 2 , Cu2S and converter matte were electrolyzed at a voltage of 3.0 V in molten…
Miao Wang, Xu Yang, Xuan Wang, Xiaomei Wang, Ming Zhang, Dapeng Hao
The top-seeded infiltration and growth process (TSIG) is very effective method for the preparation of YBa 2 Cu 3 O 7-x (YBCO) bulk superconductors. In order to improve the levitation force of the samples, a series of single domain YBCO bulk superconductors wi…
Afolabi Ayeni, Shafiq Alam, Georges Kipouros
The redox reaction of gold III chloride in acid solutions has been electro-chemically investigated using a cyclic voltammetry technique. This paper emphasizes the current and potential sites at which gold III chloride is reduced in hydrochloric acid that is v…
Ran Guo, Xuemei Yi, Xiongzhang Liu, Qingda Li, Takahiro Nomura
Magnesium silicon nitride (MgSiN 2 ) was synthesized without any additives under a nitrogen gas flow (200 mL/min) using a nitriding method. The effects of temperature and holding time on its purity and morphology were investigated. A single-phase MgSiN 2 powd…
Mustapha Hidouri, Faycal Ben Tahar, Khaled Bouzouita
A study was performed to investigate the effect of some selected sintering additives on the densification and microstructure of fluorapatite (FAp, Ca 10 (PO 4 ) 6 F 2 ). The sintering aids, used for improving the material densification at lower than 1080℃ tem…
Guadalupe Canosa, Paula V. Alfieri, Carlos A. Giudice
Many protective treatments for low density wood are applied by impregnation to give waterrepellency and to control pathologies that usually have this substrate. The properties of Araucaria angustifolia, chemically modified by impregnation with methyltriethoxy…
No articles in this issue.
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).