ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss…
Jiamin Jin, Weifan Bao
The results on the equilibrium pressure measurement of BaCO 3 + C = BaO + 2CO reaction and the demonstration of chemical state of iron proved that decomposition-generation cycle of BaCO3 and oxidation-reduction cycle of Fe in that reaction condition case were…
Erinda Ndreçka, Nikolla Civici, Ilir Gjipali, Filippo Niccolai, Stefano Ridolfi
In this paper we will consider the results of the investigation of ceramic shards from four Neolithic sites located in the south-east of Albania using different analytical methods. The sites of Vashtemi, Podgori, Dunavec and Maliq, situated at the plateau of…
Junjie Tang, Pengwei Shi, Hao Duan, Kwang-Yoon Kim, Minqi Xin
The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual…
Fuchuan Luo, Ying Yuan, Bin Tang, Jun Yang, Shuren Zhang
TiO2 filled polytetrafluoroethylene (PTFE) composite were fabricated for microwave circuit applications. PTFE/TiO2 composites were prepared by cold pressing and hot treating. The particle size of TiO2 varied from 5 μm to 11 μm.TiO2 powders with different size…
Bin Tang, Fuchuan Luo, De Zhou, Ying Yuan, Shuren Zhang
In this paper, a detailed study was carried out on the PTFE reinforced with TiO2 and CaTiO3. The filler content of ceramic powder was a fixed value of 61 wt% and the content of CaTiO3 in PTFE matrix varied from 0 wt% to 16 wt% with a step size of 4 wt%. The e…
Ying Yuan, Haodong Lin, Zehua Jiang, Zhifeng Chi, Minghao Yao, Shuren Zhang, 1 1, 1 1, 1 1, 1 1, 1 1, 1 1
In this work, the polytetrafluoroethylene (PTFE)-based composite substrates were manufactured by mixing, calendering, hot-pressing sintering. The composition of all the samples was PTFE, SiO2 and chopped E-glass fibers. The effects of content of E-glass fiber…
Keming Liu, Deping Lu, Kai Fu, Peilan Luo, Zhikai Huang, Wei Guo, Jiuming Yu, Jin Zou, Qiang Hu
This paper studied the microstructure evolution of a deformation-processed Cu-7Cr in situ composite prepared by thermo-mechanical processing. The longitudinal and transverse sectional microstructures were analyzed using an optical microscope and a scanning el…
Fangyi Mao, Yang Wang, Kang Fu, Junhong Jin, Shenglin Yang, Guang Li
Porous carbon nanofibers (PCNFs) were prepared through electrospinning, pre-oxidation and carbonization with polyacrylonitrile (PAN) as carbon precursor and polymethyl methacrylate (PMMA), CaCO3 as pore-forming agents. The structure, morphology, specific surf…
Yi Ding, Kang Fu, Yang Wang, Shenglin Yang, Junhong Jin, Guang Li
Heteroatoms doped Carbon materials have been proved as promising catalyst support material for oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC). In this paper, nitrogen-doped porous nanofibers (N-PCNF) were fabricated via cost eff…
William Ghann, Hany Sobhi, Hyeonggon Kang, Tulio Chavez-Gil, Fred Nesbitt, Jamal Uddin
Dye sensitized solar cell represents a promising method for the conversion of solar energy to electric energy. In the present work free N,N'-bis(salicyli-dene)ethylenediamine and its copper (II) complex were synthesized, characterized, and investigated for us…
No articles in this issue.
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).