ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss…
J. J. Chen, A. K. H. Kwan, P. L. Ng, L. G. Li, 1 1
Adoption of a low water/powder (W/P) ratio is the key to improve the strength and durability of concrete, which relies on a high packing density because fresh concrete requires excess water to offer flowability. To obtain a high packing density, powders with…
Yiming Yao, Erik Ström, Xin-Hai Li, Qin Lu
A composites of (Mo 0.9 Cr 0.1 )Si 2 + 15vol% ZrO 2 was prepared with powder metallurgy and Pressure- Less Sintering (PLS) method, aiming at applications of high temperature structural materials. Mechanical properties of the composites were assessed with hard…
Yiming Yao, Ola Lyckfeldt, Aurélien Tricoire, Aurélien Tricoire
This study is aiming at controlling the microstructure of plasma sprayed Al 2 O 3 -TiO 2 composite coatings using freeze granulated powders. As sprayed and sintered Al 2 O 3 + 3wt%TiO 2 powders were air plasma sprayed with industry process parameters and comp…
Hui Wang, Jieyu He, Hongyuan Sun
The diffusion of potassium sorbate incorporated into gelatin based antimicrobial film was measured. Fick’s second law was applied to investigate the mechanism of potassium sorbate released from the films. The mathematical model was established. The result sho…
Thankam Sreekumar Rajesh, Ravipudi Venkata Rao
Surface coating is a critical procedure in the case of maintenance engineering. Ceramic coating of the wear areas is of the best practice which substantially enhances the Mean Time between Failure (MTBF). EN24 is a commercial grade alloy which is used for var…
Ninghui Song, Min Guo, Lili Shi
A new method combining QuEChERS (quick, easy, cheap, effective, rugged and safe) and DLLME (dispersive liquid–liquid microextraction) for the simultaneous determination of residues of ten sulfonylurea herbicide in water using UPLC-MS/MS was developed and vali…
R. J. Gao, T. Ding, X. J. Duan
Sea urchin-like cuprous oxide with hollow glass microsphere as core was prepared using sodium sulfite as the reducing agent and sodium acetate-acetic acid as buffer solution in copper sulfate solution. Methyl orange was selected as degradation target for phot…
Elyor Bahriddinovich Saitov
The possibility of building of clusters of impurity atoms of Ni in silicon and controlling their parameters is currently investigated in the present research article. Our group develops a special technique for doping, the so-called “low-temperature doping” of…
Su Chen, Shuibin Yang, Dingjin Fan, Xuehong Liao
In this paper, CeVO 4 /FeVO 4 nanocomposites were prepared by direct feeding microwave synthesis method with nine water iron nitrate (Fe(NO 3 )3 • 9H 2 O), cerium nitrate hexahydrate (Ce(NO 3 )3 • 6H 2 O) and ammonium metavanadate (NH 4 VO 3 ) as ra…
Carla Macie, Arão Manhique, Rodrigues Manjate, Carvalho Madivate
Limestone has been used as a partial substitute for cement, due to its beneficial effect on mechanical properties of mortars and concretes. In the present research, we studied the effect of the mineralogical composition in mortars produced from limestone samp…
No articles in this issue.
Journal of Materials Science and Chemical Engineering (MSCE) is an international journal dedicated to the latest advancement of materials science and chemical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new iss… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).