Composition and Refractory Properties of Mixtures of Moroccan Silica-Alumina Geomaterials and Alumina
- 1 Department of Chemistry, Faculty of Science and Technology, University Hassan II Mohammedia, Casablanca, Morocco
- 2 Department of Earth Sciences, Geo-Materials and Geo-Environment Team (Geo M&E), Scientific Institute, University Mohammed V Agdal, Rabat, Morocco
- 3 Department of Chemistry, Faculty of Science and Technology, University Hassan II Mohammedia, Casablanca, Morocco
Abstract
Five mixtures (M1 to M5) of silica-alumina geomaterials and two varieties of alumina (A P and A R ) were used for the elaboration of mullite refractory materials between 1500 ℃ and 1600 ℃ . An X-ray diffraction (XRD) analysis showed that the refractory samples are composed of mullite, corundum and silica. The length of the mullite crystals was meas ured by a method of image analysis of scanning electron microscopy (SEM). Chemical and mechanical properties of these materials were investigated and correlated with their microstructure. Resistance towards Acid Attack test showed that the refractory samples present good resistance, as well as, the alumina powder A R obtained from waste of sil ica-alumina bricks proves to be efficient for an eventual use.
- M. Kolli, M. Hamidouche, G. Fantozzi and J. Chevalier, “Elaboration and Characterization of a Refractory Based on Algerian Kaolin,” Ceramics International, Vol. 33, No. 8, 2007, pp. 1435-1443. doi:10.1016/j.ceramint.2006.06.009
- B. Amrane, E. Ouedraogo, B. Mamen, S. Djaknoun and N. Mesrati, “Experimental Study of the Thermo-Mechanical Behaviour of Alumina-Silicate Refractory Materials Based on a Mixture of Algerian Kaolinitic Clays,” Ceramics International, Vol. 37, No. 8, 2011, pp. 3217-3227. doi:10.1016/j.ceramint.2011.05.095
- M. A. Sainz, F. J. Serrano, J. M. Amigo, J. Bastida and A. Caballero, “XRD Microstructural Analysis of Mullite Obtained from Kaolinite—Alumina Mixtures,” Journal of the European Ceramic Society, Vol. 20, No. 4, 2000, pp. 403-412. doi:10.1016/S0955-2219(99)00183-1
- J. Anggono, “Mullite Ceramics: Its Properties, Structure and Synthesis,” Jurnal Teknik Mesin, Vol. 7, No. 1, 2005, pp. 1-10.
- J. Poirier, “Les Céramiques Réfractaires, de l’Elaboration aux Propriétés d’Emploi,” Verres, Céramiques et Composites, Vol. 1, 2011, pp. 28-42.
- M. A. Sainz, F. J. Serrano, J. Bastidab and A. Caballero, “Microstructural Evolution and Growth of Crystallite Size of Mullite during Thermal Transformation of Kyanite,” Journal of the European Ceramic Society, Vol. 17, No. 11, 1997, pp. 1277-1284. doi:10.1016/S0955-2219(96)00231-2
- J. A. Santillan, H. B. Ramirez and R. C. Bradt, “Dense Mullite from Attrition Milled Kyanite and α-Alumina,” Journal of Ceramic Processing Research, Vol. 8, No. 1, 2007, pp. 1-11.
- C. Sadik, I. El Amrani and A. Albizane, “Silica-Alumina Refractory Synthesis Based on Moroccan Granitic Geo-Materials,” Journal of Chemical & Engineering, Vol. 7, No. 2, 2013 (in press).
- F. Sahnoune, M. Chegaar, N. Saheb, P. Goeuriot and F. Valdivieso, “Algerian Kaolinite Used for Mullite Formation App,” Clay Science, Vol. 38, No. 3-4, 2008, pp. 304-310. doi:10.1016/j.clay.2007.04.013
- M. L. Bouchetou, J. P. Ildefonse, J. Poirier and P. Daniellou, “Mullite Grown from Fired Andalusite Grains: The Role of Impurities and of the High Temperature Liquid Phase on the Kinetics of Mullitization and Consequences on Thermal Shocks Resistance,” Ceramics International, Vol. 31, No. 7, 2005, pp. 999-1005. doi:10.1016/j.ceramint.2004.10.015
- W. Pannhorts and H. Schneider, “The High-Temperature Transformation of Andalusite (Al2SiO5) into 3/2 Mullite (3Al2O3-2SiO2) and Vitreous Silica (SiO2),” Mining Magazine, Vol. 42, No. 322, 1978, pp. 195-198. doi:10.1180/minmag.1978.042.322.05