The Effect of Glass Plate Thickness and Type and Thickness of the Bonding Interlayer on the Mechanical Behavior of Laminated Glass
- 1
- 2
Abstract
In this work the effect of the type of the bonding interlayer (polyvinyl butyral (PVB) or Ethyl Vinyl Acetate (EVA)), number of bonding layers, and the position and the thickness of the Glass plates on the maximum load capacity and absorbed energy by laminated glass. Furthermore, this investigation presents a mathematical model that relates the maximum force capacity of the glass laminated structure to the glass plate thickness, type and thickness of the inter-layer regardless the position of the fixed glass plate. Both practical work results and the theoretical model indicate that the maximum load capacity of laminated glass bonded with either PVB or EVA decreases as the interlayer thickness increases. Moreover, the maximum load capacity for the glasses bonded with EVA is greater than those for the PVB bonded ones under the same conditions. On the other hand, it was observed that that laminated glass absorbed energy increases with the increase of the interlayer thickness and the increase of glass plate thickness.
- R. Quenett, “The Mechanical Behavior of Laminated Safety Glass under Bending and Impact Stresses,” Manuskript-Eing, Forgetragen auf dem DVM-Tag, Wurzburg, 1967.
- J. A. Hooper, “On the Bending of Architectural Laminated Glass,” International Journal of Mechanical Science, Vol. 15, No. 4, 1973, pp. 309-333. doi:10.1016/0020-7403(73)90012-X
- Pilkington ACI, “A Practical and Theoretical Investigation into the Strength of Laminated Glasses under Uniformly Distributed Loading,” Laboratory Report and Discussion, Pilkington ACI Operations Pty. Ltd., 1971, p. 206.
- M. P. Linden, J. E. Minor, R. A. Behr and C. V. C. Vallabhan, “Evaluation of laterally Loaded Laminated Glass Units by Theory and Experiment,” Supplemental Report No. 1, Glass Research and Testing Laboratory, Texas Tech University, Lubbock, 1983.
- H. S. Norville, “Breakage Tests of Du Pont Laminated Glass Units,” Glass Research and Testing Laboratory, Texas Tech University, Lubbock, 1990.
- K. Uwe, “Measuring the delaminating Energy in Laminated Safety Glass,” Proceedings of Glass Processing, Finland, 17-20 June 2005, pp. 102-104.
- S. R. Nagalla, C. V. G. Vallabhan, J. E. Minor and H. S. Norville, “Stresses in Layered Units and Monolithic Glass Plates,” NTIS Accession No. PB86-142015/AS, Glass Research and Testing Laboratory, Texas Tech University, Lubbock, 1985.
- J. E. Minor and P. L. Reznik, “Failure Strength of Laminated Glass,” Journal of Structural Engineering ASCE, Vol. 116, No. 4, 1990, pp. 1030-1039. doi:10.1061/(ASCE)0733-9445(1990)116:4(1030)
- M. P. Linden, J. E. Minor and C. V. C. Vallabhan, “Evaluation of Laterally Loaded Laminated Glass Units by Theory and Experiment,” Glass Research and Testing Laboratory, Texas Tech University, Lubbock, 1984.
- B. Weller, “Experimental Study on Different Interlayer Materials for Laminated Glass,” Glass Processing Days, Finland, 2005, pp. 386-394.
- R. A. Behr and P. A. Kremer, “Dynamic Strains in Architectural Laminated Glass Subjected to Low Velocity Impacts From Small Projectiles,” Journal of Materials Science, Vol. 34, No. 23, 1999, pp. 5749-5756. doi:10.1023/A:1004702100357
- M. Y. Zang, Z. Lei and S. F. Wang, “Investigation of Impact Fracture Behavior of Automobile Laminated Glass by 3D Discrete Element Method,” Springer Verlag, Berlin, 2007.
- J. Belis, J. Depauw, D. Callewaer, D. Delincé and R. Van Impe, “Failure Mechanisms and Residual Capacity of Annealed Glass/SGP Laminated Beams at Room Temperature,” Journal of Materials Science, Vol. 16, No. 6, 2008, pp. 1866-1875.