A New Way to Improve Thermal Capacities of Lubricants for the Manufacture of Flint Glass Perfume Bottles: Part B—Thermal Analysis and Physico-Chemical Observations for the Different Lubrications at the Glass/Punch Interface
- 1
- 2
- 3
- 4
- 5
Abstract
In the hollow glass industry, more specifically in the luxury perfume glass bottle industry, the success of the forming process depends on controlling the thermal exchange at the glass/mold interface to prevent defects on the glass surface. This study concerns a new way to analyze the impact of lubrication on the glass/tool thermal exchanges. It combines the thermal analysis on the experimental Glass/Tool Interaction (GTI) platform in the TEMPO Laboratory (Valenciennes, France) and the Physico-Chemical measurements on the glass samples by the BCR Center (Mons, Belgium). Part B presents the analysis of the flint glass pressing cycles using different punch lubrication conditions (i.e., bare punch, swabbed punch, coated punch, and coated/swabbed punch). The thermal analysis permits us to rank the lubrication conditions in terms of their capacity to limit the thermal exchange at the punch/glass interface. We defined a new lu- bricating paste composition based on the Physico-Chemical observations of the lubrication transfer on the pressed glass. The GTI platform results proves that the new composition does not affect the insulating power of the lubricating paste and permits us to eliminate defects on the glass samples that are not accepted in industrial situations.
- C. J. Fellows and F. Shaw, “A Laboratory Investigation of Glass to Mould Heat Transfer during Pressing,” Glass Technology, Vol. 19, No. 1, 1978, pp. 4-9.
- P. Moreau, D. Lochegnies, S. Gregoire and J. César de Sa, “Analysis of Lubrification in Glass Blowing: Heat Trans- fer Measurements and Impact on Forming,” Glass Tech- nology : European Journal of Glass Science and Tech- nology, Part A, Vol. 49, No. 1, 2008, pp. 8-16.
- D. H?hne, B. Pitschel, M. Merkwitz, R. L?big, “Meas- urement and Mathematical Modelling of the Heat Trans- fer in the Glass Forming Process, in Consideration of the Heat Transfer Coefficients and Radiation Influences,” Glass Science and Technology, Vol. 76, No. 6, 2003, pp. 309-317.
- W. C. Dowling, H. V. Fairbanks and W. A. Koehler, “A Study of the Effect of Lubricants on the Adherence of Molten Glass to Heated Metals,” Journal of the American Ceramic Society, Vol. 33, No. 9, 1950, pp. 269-273.. doi:10.1111/j.1151-2916.1950.tb12797.
- J. Pech, G. Berthomé, M. Jeymond and N. Eustathopou- los, “Influence of Glass/Mould Interfaces on Sticking,” Glass Science Technology, Vol. 78, No. 2, 2005, pp. 54-62.
- P. Manns, W. D?ll, G. Kleer, “Glass in Contact with Mould Materials for Container Production,” Glastech. Ber Glass Science and Technology, Vol. 68, No. 12, 1995, pp. 389-399.
- K. D. Fischbach, K. Georgiadis, F. Wang, O. Dambon, F. Klocke, Y. Chen and A.Y. Yi, “Investigation of the Eff- ects of Process Parameters on the Glass-to-Mold Sticking Force during Precision Glass Molding,” Surface and Coatings Technology, Vol. 205, 2010, pp. 312-319. doi:10.1016/j.surfcoat.2010.06.049
- D. Rieser, G. Spie? and P. Manns, “Investigations on Glass-to-Mold Sticking in the Hot Forming Process,” Journal of Non-Crystalline Solids, Vol. 354, 2008, pp. 1393-1397.
- M. Falipou, C. Donnet, “Sticking Temperature Investiga- tions of Glass/Metal contacts—Determination of Influ- encing Parameters,” Glastech. Ber. Glass Science and Technology, Vol. 70, No. 5, 1997, pp. 137-145.
- G. de Vaucorbeil, “Le Choix des Matériaux pour les Moules de Verrerie,” Verre, Vol. 9, 2003, pp. 38-42.
- R. Guilbaut, D. Lochegnies, P. Moreau, “In and Outside Vision of Glass Blow and Blow,” in: D. Lochegnies and P. Moreau, Eds., Proceedings of the 2nd International Colloquium Modelling of Glass Forming and Tempering, Valenciennes, France, Presses Universitaires de Valen- ciennes, Valenciennes, 23-25 January, 2002, pp. 57-64.