Aiming to use lignocellulosic biomass as energy source, one of the process that may aggregate values is the densification process, which allows the production of bioenergy using solid fuels, mainly for reducing transportation costs. In this research, solid fuel from co-briquetting of wood residues from sawmill using commercial kraft lignin as binder was investigated. The effects of compression pressure (900, 1200 and 1500 PSI) and briquette formulation (varying wood and kraft lignin proportion) on the quality and characteristics of briquettes were evaluated. The main findings were that briquetting of wood residues with kraft lignin resulted in an improvement of bulk density, strength rupture modulus, low heating value (LHV) and high heating value (HHV). The briquettes using 4% and 6% of kraft lignin, and submitted to 1200 to 1500 PSI, presented higher bulk density and strength resistance, respectively. On the other hand, the heating values showed the highest results with the addition of 2% lignin at 900 PSI, being the legal range for additives in briquettes for many countries such as in European Union.
Luterbacher, J.S., Azarpira, A., Motagamwala, A.H., Lu, F., Ralph, J. and Dumesic, J.A. (2015) Lignin Monomer Production Integrated into the γ-Valerolactone Sugar Platform. Energy & Environmental Science, 8, 2657-2663. https://doi.org/10.1039/C5EE01322D
Chen, F., Li, N., Li, S., Li, G., Wang, A., Cong, Y., Wang, X. and Zhang, T. (2016) Synthesis of Jet Fuel Range Cycloalkanes with Diacetone Alcohol from Lignocellulose. Green Chemistry, 18, 5751-5755. https://doi.org/10.1039/C6GC01497F
Welfle, A.J. (2017) Balancing Growing Global Bioenergy Resource Demands—Brazil’s Biomass Potential and the Availability of Resources for Trade. Biomass and Bioenergy, 105, 83-95. https://doi.org/10.1016/j.biombioe.2017.06.011
Ji, H., Dong, C., Yang, G. and Pang, Z. (2018) Valorization of Lignocellulosic Biomass towards Multi-Purpose Fractionation: Furfural, Phenolic Compounds and Ethanol. ACS Sustainable Chemistry & Engineering, 6, 15306-15315. https://doi.org/10.1021/acssuschemeng.8b03766
Welfle, A., Thornley, P. and Röder, M. (2020) A Review of the Role of Bioenergy Modelling in Renewable Energy Research & Policy Development. Biomass and Bioenergy, 136, Article ID: 105542. https://doi.org/10.1016/j.biombioe.2020.105542
Huang, H., Liu, J., Liu, H., Evrendilek, F. and Buyukuda, M. (2020) Pyrolysis of Water Hyacinth Biomass Parts: Bioenergy, Gas Emissions, and By-Products Using TG-FTIR and Py-GC/MS Analyses. Energy Conversion and Management, 207, Article ID: 112552. https://doi.org/10.1016/j.enconman.2020.112552
Guo, Z., Wu, J., Zhang, Y., Wang, F., Guo, Y., Chen, K. and Liu, H. (2020) Characteristics of Biomass Charcoal Briquettes and Pollutant Emission Reduction for Sulfur and Nitrogen during Combustion. Fuel, 272, Article ID: 117632. https://doi.org/10.1016/j.fuel.2020.117632
World Bioenergy Association (2019) Global Bionergy Statistics 2019. World Bioenergy Association, Stockholm.
Obernberger, I. and Thek, G. (2004) Physical Characterisation and Chemical Composition of Densified Biomass Fuels with Regard to Their Combustion Behavior. Biomass and Bioenergy, 27, 653-669. https://doi.org/10.1016/j.biombioe.2003.07.006
Ackom, E., Mabee, W.E. and Saddler, J.N. (2010) Industrial Sustainability of Competing Wood Energy Options in Canada. Applied Biochemistry and Biotechnology, 162, 2259-2272. https://doi.org/10.1007/s12010-010-9000-6
Miao, Z., Shastri, Y., Grift, T.E., Hansen, A.C. and Ting, K.C. (2011) Lignocellulosic Biomass Feedstock Supply Logistic Analysis. ASABE Conference Paper, Louisville, 7-10 August 2011, Articlr ID: 1110484. https://doi.org/10.13031/2013.37203
Karagiannidis, A. (2012) Waste to Energy: Opportunities and Challenges for Developing and Transition Economies, Green Energy and Technology. Springer Science & Business Media, London. https://doi.org/10.1007/978-1-4471-2306-4
Strezov, V. and Anawar, H. (2019) Renewable Energy Systems from Biomass: Efficiency, Innovation and Sustainability. CRC Press, Boca Raton. https://doi.org/10.1201/9781315153971
Kumar, A., Kumar, N., Baredar, P. and Shukla, A. (2015) A Review on Biomass Energy Resources, Potential, Conversion and Policy in India. Renewable and Sustainable Energy Reviews, 45, 530-539. https://doi.org/10.1016/j.rser.2015.02.007
Kaliyan, N. and Morey, R.V. (2009) Factors Affecting Strength and Durability of Densified Biomass Product. Biomass and Bioenergy, 33, 337-359. https://doi.org/10.1016/j.biombioe.2008.08.005
Ajiboye, T.K., Abdulkareem, S. and Anibijuwon, A.O.Y. (2016) Investigation of Mechanical Properties of Briquette Product of Sawdust-Charcoal as a Potential Domestic Energy Source. Journal of Applied Science and Environmental Management, 20, 1179-1188. https://doi.org/10.4314/jasem.v20i4.34
Samuelsson, R., Thyrel, M., Sjöström, M. and Lestander, T. (2009) Effect of Biomaterial Characteristics on Pelletizing Properties and Biofuel Pellet Quality. Fuel Processing Technology, 90, 1129-1134. https://doi.org/10.1016/j.fuproc.2009.05.007
Nilsson, D., Bernesson, S. and Hansson, P. (2011) Pellet Production from Agricultural Raw Materials—A Systems Study. Biomass and Bioenergy, 35, 679-689. https://doi.org/10.1016/j.biombioe.2010.10.016
Emerhi, E.A. (2011) Physical and Combustion Properties of Briquettes Produced from Sawdust of Three Hardwood Species and Different Organic Binders. Advances in Applied Science Research, 2, 236-246.
Chin, O.C. and Siddiqui, K.M. (2000) Characteristics of Some Biomass Briquettes Prepared under Modest Die Pressures. Biomass and Bioenergy, 18, 223-228. https://doi.org/10.1016/S0961-9534(99)00084-7
Ahn, B.J., Chang, H.S., Lee, S.M., Choi, D.H., Taek Cho, S.T., Han, G.S. and Yang, I. (2014) Effect of Binders on the Durability of Wood Pellets Fabricated from Larix kaemferi C. and Liriodendron tulipifera L. Sawdust. Renewable Energy, 62, 18-23. https://doi.org/10.1016/j.renene.2013.06.038
Rajaseevan, T., Srinivasan, V., Syed Mohamed Qafir, G. and Srithar, K. (2016) An Investigation on the Performance of Sawdust Briquette Blending with Neem Powder. Alexandria Engineering Journal, 55, 2833-2838. https://doi.org/10.1016/j.aej.2016.07.009
Zhang, G., Sun, Y. and Xu, Y. (2018) Review of Briquette Binders and Briquetting Mechanism. Renewable and Sustainable Energy Reviews, 82, 477-487. https://doi.org/10.1016/j.rser.2017.09.072
Lubwama, M., Yiga, V.A., Muhairwe, F. and Kihedu, J. (2020) Physical and Combustion Properties of Agricultural Residue Bio-Char Bio-Composite Briquettes as Sustainable Domestic Energy Sources. Renewable Energy, 148, 1002-1016. https://doi.org/10.1016/j.renene.2019.10.085
Boudet, A.M. (2000) Lignins and Lignification: Selected Issues. Plant Physiology and Biochemistry, 38, 81-96. https://doi.org/10.1016/S0981-9428(00)00166-2
Ekeberg, D., Gretland, K.S., Gustafsson, J., Braton, S.M. and Fredheim, G.E. (2006) Characterisation of Lignosulphonates and Kraft Lignin by Hydrophobic Interaction Chromatography. Analytica Chimica Acta, 565, 121-128. https://doi.org/10.1016/j.aca.2006.02.008
Boschetti, W.T.N., Carvalho, A.M.M.L., Carneiro, A.C.O., Santos, L.C. and Poyares, L.B.Q. (2019) Potential of Kraft Lignin as an Additive in Briquette Production. Nordic Pulp & Paper Research Journal, 34, 147-152. https://doi.org/10.1515/npprj-2018-0002
Boschetti, W.T.N., Lopes, A.C.P., Ribeiro, R.A., Reyes, R.Q. and Carneiro, A.C.O. (2019) Kraft Lignin as an Additive in Pine and Eucalyptus Particle Composition for Briquette Production. Revista árvore, 43, Article ID: e430201. https://doi.org/10.1590/1806-90882019000200001
Gouvêa, A.F.G., Carvalho, A.M.M.L. and Carneiro, A.C.O. (2018) Extração da Lignina Kraft de Eucalipto e Uso para Energia. Editora Appris, Paraná.
Stelte, W., Sanadi, A.R., Shang, L., Holm, J.K., Ahrenfeldt, J. and Henriksen, U.B. (2012) Recent Developments in Biomass Pelletization—A Review. BioResources, 7, 4451-4490. https://doi.org/10.15376/biores.7.3.4451-4490
Agrawal, A., Kaushik, N. and Biswas, S. (2014) Derivatives and Applications of Lignin—An Insight. The Scitech Journal, 1, 30-36.
Shyamalee, D., Amarasinghe, A.D.U.S. and Senanayaka, N.S. (2015) Evaluation of Different Binding Materials in Forming Biomass Briquettes with Sawdust. International Journal of Scientific and Research Publications, 5, 1-8.
Pereira, B.L.C., Carneiro, A.C.O., Carvalho, A.M.M.L., Vital, B.R., Oliveira, A.C. and Canal, W.D. (2016) Influência da adição de Lignina Kraft nas propriedades de pellets de Eucalipto. Revista Floresta, 46, 235-242. https://doi.org/10.5380/rf.v46i2.44936
Mousa, E.A., Ahmed, H.M. and Wang, C. (2017) Novel Approach towards Biomass Lignin Utilization in Ironmaking Blast Furnace. ISIJ International, 57, 1788-1796. https://doi.org/10.2355/isijinternational.ISIJINT-2017-127
Aamiri, O.B., Thilakaratne, R., Tumuluru, J.S. and Satyavolu, J. (2019) An “In-Situ Binding” Approach to Produce Torrefied Biomass Briquettes. Bioengineering, 6, Article No. 87. https://doi.org/10.3390/bioengineering6040087
Ház, A., Jablonsky, M., Šurina, I., Kačík, F., Bubeníková, T. and Ďurkovič, J. (2019) Chemical Composition and Thermal Behavior of Kraft Lignins. Forests, 10, Article No. 483.
Tumuluru, J.S., Wright, C.T., Hess, J.R. and Kenney, K.L. (2011) A Review of Biomass Densification Systems to Develop Uniform Feedstock Commodities for Bioenergy Application. Biofuels, Bioproducts and Biorefining, 5, 683-707. https://doi.org/10.1002/bbb.324
Rolim, S.G. and Piotto, D. (2019) Silviculture and Wood Properties of Natives Species of the Atlantic Forest of Brazil. Ed. Rupestre, Belo Horizonte, 164 p.
Lorenzi, H. (2002) árvores brasileiras: Manual de identificação e cultivo de plantas arbóreas nativas do Brasil. 4th Edition, Instituto Plantarum, Nova Odessa.
Lorenzi, H. (2002) árvores brasileiras: Manual de identificação e cultivo de plantas arbóreas nativas do Brasil. 2nd Edition, Instituto Plantarum, Nova Odessa.
Lorenzi, H. (2014) árvores brasileiras: Manual de identificação e cultivo de plantas arbóreas nativas do Brasil. 6th Edition, Instituto Plantarum, Nova Odessa.
Silva, C.E.S.S., Pace, J.H.C., Gomes, F.J.B., Carvalho, P.C.L., Reis, C.A., Latorraca, J.V.F., Rolim, S.G. and Carvalho, A.M. (2020) Comparison between Resistograph Analysis with Physical Properties of the Wood of Brazilian Native Tree Species. Floresta e Ambiente, 27, Article ID: e20190052. https://doi.org/10.1590/2179-8087.005219
TAPPI (Technical Association of the Pulp and Paper Industry) (1996) Standard Method T257 cm-85. Technical Association of the Pulp and Paper Industry, Atlanta.
TAPPI (Technical Association of Pulp and Paper Industry) (1997) Standard Method T264 om-97. Technical Association of the Pulp and Paper Industry, Atlanta.
TAPPI (Technical Association of Pulp and Paper Industry) (1991) Standard Method T15 os-58. Technical Association of the Pulp and Paper Industry, Atlanta.
TAPPI (Technical Association of Pulp and Paper Industry) (2002) Standard Method T211 om-93. Technical Association of the Pulp and Paper Industry, Atlanta.
Wallis, A.F.A., Wearne, R.H. and Wright, P.J. (1996) Chemical Analysis of Polysaccharides in Plantation Eucalypt Woods and Pulps. CRC Publications Committee, Australia.
Scandinavian Pulp and Paper and Board Testing Committee (2009) SCAN—Test Methods. Scandinavian Pulp, Paper and Board Testing Committee, Stockholm.
TAPPI (Technical Association of the Pulp and Paper Industry) (1991) Standard Method. UM 250 Acid-Soluble Lignin in Wood and Pulp. Technical Association of the Pulp and Paper Industry, Atlanta.
TAPPI (Technical Association of Pulp and Paper Industry) (1998) Standard Method T222 om-98. Technical Association of Pulp and Paper Industry, Atlanta.
Solar, R., Kacik, F. and Melcer, I. (1987) Simple Semi-Micro Method for the Determination of O-Acetyl Groups in Wood and Related Materials. Nordic Pulp & Paper Research Journal, 4, 139-141. https://doi.org/10.3183/npprj-1987-02-04-p139-141
Scott, R.W. (1979) Colorimetric Determination of Hexuronic Acids in Plant Materials. Analytical Chemistry, 51, 936-941. https://doi.org/10.1021/ac50043a036
Deutsches Institut Für Normung (DIN) (2011) DIN EN 15104. Determination of Total Content of Carbon, Hydrogen and Nitrogen—Instrumental Methods. CEN, Berlin.
Deutsches Institut Für Normung (DIN) (2010) DIN EN 14918. Determination of Calorific Value. CEN, Berlin.
Vital, B.R. (1984) Methods for Determining Wood Density. SIF Technical Report, Sistema de Informações Fiscais (SIF), Minas Gerais.
Associação Brasileira De Normas Técnicas (ABNT) (2009) Normas técnicas NBR ISO 11093-9, Papel e cartão-Ensaio de tubetes-Parte 9, Rio de Janeiro.
Filippetto, D. (2008) Briquetagem de resíduos vegetais: Viabilidade técnico—Econômica e potencial de mercado. PhD Thesis, Universidade Estadual de Campinas, São Paulo, 74 p.
Quirino, W.F. (2004) Briquetagem de resíduos ligno-celulosico. Laboratório de Produtos Florestais-LPF/IBAMA, Brasília, 10 p.
Moreno, A.I., Font, R. and Conesa, J.A. (2016) Physical and Chemical Evaluation of Furniture Waste Briquettes. Waste Management, 49, 245-252. https://doi.org/10.1016/j.wasman.2016.01.048
Shapiro, S.S. and Wilk, M.B. (1965) An Analysis of Variance Test for Normality (Complete Sample). Biometrika, 52, 591-611. https://doi.org/10.1093/biomet/52.3-4.591
Cochran, W.G. (1950) The Comparison of Percentages in Matched Samples. Biometrika, 7, 256-266. https://doi.org/10.1093/biomet/37.3-4.256
Santana, W.M.S., Calegario, N., Arantes, M.D.C. and Trugilho, P.F. (2012) Effect of Age and Diameter Class on the Properties of Wood from Clonal Eucalyptus. Cerne, 18, 1-8. https://doi.org/10.1590/S0104-77602012000100001
Trugilho, P.F., Bianchi, M.L., Rosado, S.C.S., Lima, J.T. and Napoli, A. (2012) Análise elementar da madeira de clones de Eucalyptus. Biomassa & Energia, 5, 53-58.
Pereira, B.L.C., Carneiro, A.C.O., Carvalho, A.M.M.L., Colodette, J.L., Oliveira, A.C. and Fontes, M.P. (2013) Influence of Chemical Composition of Eucalyptus Wood on Gravimetric Yield and Charcoal Properties. BioResources, 8, 4574-4592. https://doi.org/10.15376/biores.8.3.4574-4592
Borges, A.C.P., Alves, C.T. and Torres, E.A. (2016) Torrefied Eucalyptus grandis. Characterization as a Biomass to Using in Industrial Scale. Chemical Engineering Transactions, 49, 283-288.
Morgan, T.J., Turn, S.Q., Sun, N. and George, A. (2016) Fast Pyrolysis of Tropical Biomass Species and Influence of Water Pretreatment on Product Distributions Biomass. PLoS ONE, 11, e0151368. https://doi.org/10.1371/journal.pone.0151368
Veiga, T.R.L.A., Lima, J.T., Dessimoni, A.L.A., Pego, M.F.F., Soares, J.R. and Trugilho, P.F. (2017) Different Plant Biomass Characterization for Biochar Production. Cerne, 23, 529-536. https://doi.org/10.1590/01047760201723042373
Silveira, E. (2018) Acoustic Field Influence in the Kinetics of Thermochemical Degradation during Biomass Torrefaction. PhD Thesis, Universidade de Brasília, Brasília, 131 p.
Silva, D.A., Eloy, E., Caron, B.O. and Trugilho, P.F. (2019) Elemental Chemical Composition of Forest Biomass at Different Ages for Energy Purposes. Floresta e Ambiente, 26, Article ID: e20160201. https://doi.org/10.1590/2179-8087.020116
Gomide, J.L., Colodette, J.L., Oliveira, R.C. and Silva, C.M. (2005) Caracterização tecnológica, para produção de celulose, da nova geração de clones de Eucalyptus do Brasil. Revista árvore, 29, 129-137. https://doi.org/10.1590/S0100-67622005000100014
Gomes, F.J.B., Colodette, J.L., Burnet, A., Batalha, L.A.R., Santos, F.A. and Demuner, I.F. (2015) Thorough Characterization of Brazilian New Generation of Eucalypt Clones and Grass for Pulp Production. International Journal of Forestry Research, 2015, Article ID: 814071. https://doi.org/10.1155/2015/814071
Demirbas, A. (2002) Relationships between Heating Value and Lignin, Moisture, Ash and Extractive Contents of Biomass Fuels. Energy Exploration & Exploitation, 20, 105-111. https://doi.org/10.1260%2F014459802760170420
Demirbas, A. (2003) Relationships between Lignin Contents and Fixed Carbons of Biomass Samples. Energy Conversion and Management, 44, 1481-1486. https://doi.org/10.1016/S0196-8904(02)00168-1
Demirbas, A. (2003) Relationships between Heating Value and Lignin, Fixed Carbon and Volatile Material Contents of Shells from Biomass Products. Energy Sources, 25, 629-635. https://doi.org/10.1080/00908310390212336
Demirbas, A. (2007) Effects of Moisture and Hydrogen Content on the Heating Value of Fuels. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 29, 649-655. https://doi.org/10.1080/009083190957801
Fahmi, R., Bridgwater, A.V., Darvell, L.I., Jones, J.M., Yates, N., Thain, S. and Donnison, I.S. (2007) The Effect of Alkali Metals on Combustion and Pyrolysis of Lolium and Festuca Grasses, Switchgrass and Willow. Fuel, 86, 1560-1569. https://doi.org/10.1016/j.fuel.2006.11.030
Tanger, P., Field, J.L., Jahn, C.E., Defoort, M.W. and Leach, J.E. (2013) Biomass for Thermochemical Conversion: Targets and Challenges. Frontiers in Plant Science, 4, Article No. 218. https://doi.org/10.3389/fpls.2013.00218
Araschi, J.C., Goveia, D., Dezjacomo, G. and Prates, G.A. (2019) Evaluation of Biomass Properties for the Production of Solid Biofuels. Floresta e Ambiente, 26, Article ID: e20180433. https://doi.org/10.1590/2179-8087.043318
Sommersacher, P., Bruneer, T. and Obenberger, I. (2012) Fuel Indexes: A Novel Method for the Evaluation of Relevant Combustion Properties of New Biomass Fuels. Energy & Fuels, 26, 380-390. https://doi.org/10.1021/ef201282y
Cherney, J.H. and Verma, V.K. (2013) Grass Pellet Quality Index: A Tool to Evaluate Suitability of Grass Pellets for Small Scale Combustion Systems. Applied Energy, 103, 679-684. https://doi.org/10.1016/j.apenergy.2012.10.050
Bezzon, G. (1994) Síntese de novos combustíveis sólidos a partir de resíduos agroflorestais e possíveis contribuições no cenário energético brasileiro. PhD Thesis, Universidade Estadual de Campinas, São Paulo, 137 p.
Eichler, P., Toledo, M., Vilares, M., Gomes, F., Lourega, R., Santos, G., Gomes, L. and Santos, F. (2017) Potential Assessment of Eucalyptus Grown for Biorefinery Processes. Agronomy Science and Biotechnology, 3, 1-11. https://doi.org/10.33158/ASB.2017v3i1p1
Duarte, A.P., Robert, D. and Lachenal, D. (2001) Eucalyptus globulus Kraft Pulp Residual Lignin. Part 2. Modification of Residual Lignin Structure in Oxygen Bleaching. Holzforschung, 55, 645-651. https://doi.org/10.1515/HF.2001.105
Zhou, X.-G. and Lu, X.-J. (2014) Structural Characterization of Kraft Lignin for Its Green Utilization. Wood Research, 59, 583-592.
Gordobil, O., Moriana, R., Zhang, L., Labidi, J. and Sevastyanova, O. (2016) Assesment of Technical Lignins for Uses in Biofuels and Biomaterials: Structure-Related Properties, Proximate Analysis and Chemical Modification. Industrial Crops and Products, 83, 155-165. https://doi.org/10.1016/j.indcrop.2015.12.048
Paula, L.E.R., Trugilho, P.F., Napoli, A. and Bianchi, M.L. (2011) Characterization of Residues from Plant Biomass for Use in Energy Generation. Cerne, 17, 237-246. https://doi.org/10.1590/S0104-77602011000200012
Paula, L.E.R., Trugilho, P.F., Rezende, R.N. and Assis, C.O. (2011) Produção e avaliação de briquetes de resíduos lignocelulósicos. Pesquisa Florestal Brasileira, 31, 103-112. https://doi.org/10.4336/2011.pfb.31.66.103
Protásio, T.P., Alves, I.C.N., Trugilho, P.F., Silva, V.O. and Baliza, A.E.R. (2011) Compactação de biomassa vegetal residual visando à produção de biocombustíveis sólidos. Pesquisa Florestal Brasileira, 31, 273-283. https://doi.org/10.4336/2011.pfb.31.68.273
Protásio, T.P., Bufalino, L., Tonoli, G.H.D., Couto, A.M., Trugilho, P.F. and Guimarães Júnior, M. (2011) Relação entre o poder calorífico superior e os componentes elementares e minerais da biomassa vegetal. Pesquisa Florestal Brasileira, 31, 122-133. https://doi.org/10.4336/2011.pfb.31.66.113
Brand, M.A. (2011) Energia de biomassa florestal. Interciência, Rio de Janeiro, 114 p.
Tan, Z. and Lagerlvist, A. (2011) Phosphorous Recovery from the Biomass Ash: A Review. Renewable and Sustainable Energy Reviews, 15, 3588-3602. https://doi.org/10.1016/j.rser.2011.05.016
Onukak, I.E., Mohammed-Dabo, I.A., Ameh, A.O., Okoduwa, S.I.R. and Fasanya, O.O. (2017) Production and Characterization of Biomass Briquettes from Tannery Solid Waste. Recycling, 2, Article No. 17. https://doi.org/10.3390/recycling2040017
Tomani, P., Axegard, P., Berglin, N., Lovell, A. and Nordgren, D. (2011) Integration of Lignin Removal into a Kraft Pulp Mill and Use of Lignin as a Biofuel. Cellulose Chemistry and Technology, 45, 533-540.