Research ArticleOpen AccessGoogle Scholar indexed
The Theory and Experimental Study of the Self-Excited Oscillation Pulsed Jet Nozzle (Pipeline Pulsed Flow Generator)
College of Materials science and Engineering, Chongqing University, Chongqing, China
College of Materials science and Engineering, Chongqing University, Chongqing, China
- 1 College of Materials science and Engineering, Chongqing University, Chongqing, China
- 2 College of Materials science and Engineering, Chongqing University, Chongqing, China
Natural Resources·Volume 04 (2013)·Pages 395–403·Published 3 September 2013·DOI10.4236/nr.2013.45049
Copy link · social · email
Abstract
In this paper, the basic theories of the Self-excited Oscillation Pulsed Jet Nozzle ( SEOPJN ) invented by the au thors are introduced. Then, some experimental results are shown. According to the results, using tricorn bits as sembled the SEOPJN to drill oil well, the rate o f penetration (ROP) increases by 8% - 77%, and the rate of the footage for tricorn bit increas es by 6.7% - 44%. Although the test was conducted in the water, good result was got in nature gas transporta tion. The volume of gas transportation could be increased by the Self-excited Oscillation Pulsed generator while the gas pressure drop could be decreased, since it significantly reduced the pressure loss during gas transportation.
KeywordsSelf-Excited Oscillation Pulsed JetNozzleOil WellNatural Gas
- Z. F. Liao and D. S. Huang, “Nozzle Device for the Self-Excited Oscillation of a Jet,” Proceedings of the 8th International Symposium on Jet Cutting Technology, Durham, August 1986, pp. 195-201.
- Z. F. Liao and C. L. Tang, “Theoretical Analysis and Experimental Study of the Pulsed Jet Device,” Proceeding of 4th US Water Jet Conference, Berkeley, 26-28 August 1987, pp. 27-34.
- Z. F. Liao, et al., “Theory and Experimental Study of the Self-Excited Oscillation Pulsed Jet Nozzle,” Chinese Journal Mechanical Engineering, Vol. 16, No. 4, 2003, pp. 379-383. doi:10.3901/CJME.2003.04.379
- Z. F. Liao, C. L. Tang and G. H. Wang, “A New Type of Nozzle for Oil-Well Drill Bits,” Proceedings 10th International Symposium on Jet Cutting Technology, Netherlands, 31 October-2 November 1990, pp. 135-144.
- Z. F. Liao and C. L. Tang, “Pulsed Jet Nozzle for Oil-Well Jetting Drilling,” Proceedings of the 7th American Water Jet Conference, Seattle, 28-31 August 1993, pp. 537-548.
- C. L. Tang, X. H. Li and Z. F. Liao, “The Study of Oscillation Jet Nozzle with Flow control Oscillator,” Proceedings of the 9th American Water Jet Conference, Dearborn, 23-26 August 1997, pp. 27-34.
- C. L. Tang and Z. F. Liao, “The Application of the Airlift and the Self-Excited Oscillation Pulsed on Exploiting Beach Placer,” 14th International Conference on Jetting Cutting Technology, Brugge, 21-23 September 1998, pp. 375-386.
- C. L. Tang and Z. F. Liao, “The Theory and Experimental Study of Self-Excited Oscillation Pulsed Jet Nozzle,” Journal of China Coal Society, Vol. 12, No. 1, 1989, pp. 90-100.
- Z. F. Liao, D. S. Chen and Y. F. Kang, “The Pipeline Pulsing Flow Generator,” China Patent No. ZL200510057466.6, 2006.