A Combined Solar Photovoltaic Distributed Energy Source Appliance
- 1
Abstract
The paper has analysed the state-of-art technology for a solar photovoltaic distributed energy source appliance. The success of implementation of photovoltaic (PV) power project is increased when PV module system is integrated with building design process and is used as multi purpose appliance for use with building elements. The improvement in overall system efficiency of building integrated PV modules embedded in building façade is achieved by minimizing and capturing energy losses. A novel solar energy utilisation technology for generation of electric and thermal power is presented by integration of ventilation and solar photovoltaic device with the heating, ventilating and air conditioning (HVAC) system. The testing appliance named as photovoltaic duct wall was a wooden frame assembly of double wall with air ventilation: two adjacent glass coated PV modules, air column, plywood board filled with polystyrene and dampers. The measurement data is collected from various sensors to read measurements of solar intensity, ambient air temperature, room air temperature, electric power, surface temperatures of PV modules and plywood board, air velocities and air temperatures in the air column. The enhancement in the air velocity of the air column is fulfilled with an exhaust fan fixed in an outdoor room. The simulation model is used to perform the two dimensional energy analyses with applied one dimensional solution of steady state heat conduction equations. The bases of simulation model are conjugating energy travel paths with network boundary conditions of convection, radiation exchange, heat storage ca- pacity, thermal storage capacity and heat transport.
- H. Dehra, “A Numerical and Experimental Study for Generation of Electric and Thermal Power with Photo- Voltaic Modules Embedded in Building Fa?ade,” Ph.D. thesis, Concordia University, Montreal, August 2004.
- H. Dehra, “Mathematical Analysis of a Solar Thermosyphon,” International conference on Advances in Energy Research, Bombay, December 2007, p. 6.
- H. Dehra, “A 1-D/2-D Model for an Exterior HVAC Rectangular Duct with a Steady Solar Heat Flux generation,” The proceedings of the Second International Green Energy Conference, Oshawa, 25-29 June 2006, pp. 1240-1251.
- H. Dehra, “The Integration of Photovoltaic and Solar Ventilation Technologies into a Pre-Fabricated Outdoor Room,” An industry poster presented at proceedings of CIM Mining Conference & Exhibition, Montreal, 29 April -2 May 2007, pp. 424-431.
- H. Dehra, “On Solar Building Energy Devices,” The 18th IASTED International Conference on Modeling and Simulation, Montreal 30 May-1 June 2007, pp. 96-101.
- H. Dehra, “A Heat Transmission Model for a Telephone Line,” 21st Canadian Congress of Applied Mechanics, Ryerson University, Toronto, 3-7 June 2007, pp. 356-357.
- H. Dehra, “The Study of a Solar Cell Device under Illumination,” 21st Canadian Congress of Applied Mechanics, Department of Mechanical & Industrial Engineering, Ryerson University, Toronto, 3-7 June 2007, pp. 354-355.
- H. Dehra, “The Electrodynamics of A Pair of PV Modules with Connected Building Resistance,” The 3rd IASME/WSEAS International Conference on energy, environment, ecosystems and sustainable development, Agios Nikolaos, Crete Island, 24-26 July 2007, pp. 562-565.
- H. Dehra, “Ventilation Materials Characterisation of a Solar Panel Duct Wall,” International Conference on Advances and Trends in Engineering Materials and their Applications, Montréal, 6-10 August 2007, p. 537.
- H. Dehra, “The Effect of Heat and Thermal Storage Capacities ff Photovoltaic Duct Wall on Co-Generation of Electric and Thermal Power,” The Proceedings of Ameri- Can Institute of Chemical Engineers, Houston, 22-26 April 2007.
- H. Dehra, “A Unified Theory for Stresses and Oscil Lations,” Canadian Acoustical Associa-tion (CAA) Conference, Concordia University, Montréal, 9-12 October 2007, pp.132-133.
- H. Dehra, “The Entropy Matrix Generated Exergy Model For A Photovoltaic Heat Exchanger Under Critical Operating Conditions,” International Journal of Exergy, Vol. 5, No. 2, 2008, pp. 132-149.