An Experimental Determination of Gross Calorific Value of Different Agroforestry Species and Bio-Based Industry Residues — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
An Experimental Determination of Gross Calorific Value of Different Agroforestry Species and Bio-Based Industry Residues
Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
,
Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
,
Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
,
Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
,
Laboratory of Agronomy and Applied Crop Physiology, Department of Agriculture, Crop Production & Rural Environment, University of Thessaly, Volos, Greece
,
Laboratory of Agronomy and Applied Crop Physiology, Department of Agriculture, Crop Production & Rural Environment, University of Thessaly, Volos, Greece
1 Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
2 Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
3 Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
4 Department of Biosystems Engineering, School of Agricultural Technology, Technological Educational Institute of Thessaly, Larissa, Greece
5 Laboratory of Agronomy and Applied Crop Physiology, Department of Agriculture, Crop Production & Rural Environment, University of Thessaly, Volos, Greece
6 Laboratory of Agronomy and Applied Crop Physiology, Department of Agriculture, Crop Production & Rural Environment, University of Thessaly, Volos, Greece
Solid biomass fuels are useful and cost effective renewable energy source. The energy content of biomass is determined by its calorific value. The objective of this study was to determine experimentally the gross calorific value (GCV) of different agroforestry species and bio-based industry residues that could be used by: a) companies specialized in processing raw biomass solid biofuel production, b) small-scale consumers (households, medium-sized residential buildings, etc.). The fuel samples used were from agricultural residues and wastes (rice husks, apricot kernels, olive pits, sunflower husks, cotton stems, etc.), energy crops and wetland herbs (cardoon, switchgrass, common reed, narrow-leaf cattail), and forest residues (populus, fagus, pinus). The GCV of the bio-mass samples was experimentally determined based on CEN/TS 14918:2005, and an oxygen bomb calorimeter was used (Model C5000 Adiabatic Calorimeter, IKA ? -Werke, Staufen, Germany). The GCV of different agroforestry species and residues ranges from 14.3 - 25.4 MJ ? kg – 1. The highest GCV was obtained by seeds and kernels due to higher unit mass and higher lipid content. Pinus sylvestris with moisture content 24.59% obtained the lowest GCV (13.973 MJ ? kg – 1).
Heinimö, J. (2008) Methodological Aspects on International Biofuels Trade: International Streams and Trade of Solid and Liquid Biofuels in Finland. Biomass Bioenergy, 32, 702-716. http://dx.doi.org/10.1016/j.biombioe.2008.01.003
Biomass Energy Center (2008) http://www.biomassenergycentre.org.uk
Asian Biomass Handbook (2008) http://www.jie.or.jp/biomass/AsiaBiomassHandbook
UNEP (2009) Converting Waste Agricultural Biomass into a Resource. United Nations Environmental Programme, Division of Technology, Industry and Economics, International Environmental Technology Centre, Osaka/Shiga.
OECD (2011) Toward Green Growth. OECD. http://www.oecd.org/greengrowth
Farrell, A.E. and Gopal, A.R. (2008) Bioenergy Research Needs for Heat, Electricity and Liquid Fuels. MRS Bulletin, 33, 373-380. http://dx.doi.org/10.1557/mrs2008.76
Ravindranath, N.H., Balachandra, P., Dasappa, S. and Usha Rao, K. (2006) Bioenergy Technologies for Carbon Abatement. Biomass Bioenergy, 30, 826-837. http://dx.doi.org/10.1016/j.biombioe.2006.02.003
Ragauskas, A.J., Williams, C.K., Davison, B.K., Britovsek, G., Cairney, J., Eckert, C.A., Frederick Jr. W.J., Hallett, J.P., Leak, D.J., Liotta, C.L., Mielenz, J.R., Murphy, R., Templer, R. and Tschaplinski, T. (2006) The Path Forward for Biofuels and Biomaterials. Science, 311, 484-489. http://dx.doi.org/10.1126/science.1114736
Hillring, B. (2006) World Trade in Forest Production and Wood Fuel. Biomass Bioenergy, 30, 815-825. http://dx.doi.org/10.1016/j.biombioe.2006.04.002
McKendry, P. (2002) Energy Production from Biomass (Part 1): Overview of Biomass. Bioresource Technology, 83, 37-46. http://dx.doi.org/10.1016/S0960-8524(01)00118-3
Binder, J.B. and Raines, R.T. (2009) Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals. Journal of the American Chemical Society, 131, 1979-1985. http://dx.doi.org/10.1021/ja808537j
Nussbaumer, T. (2003) Combustion and Co-Combustion of Biomass: Fundamentals, Technologies and Primary Measures for Emission Reduction. Energy & Fuels, 17, 1510-1521. http://dx.doi.org/10.1021/ef030031q
Van Loo, S. and Koppejan, J. (2002) Handbook of Biomass Combustion and Co-Firing. IEA Bioenergy Task, 32, 7-53.
Gravalos, I., Kateris, D., Xyradakis, P., Gialamas, T., Loutridis, S., Augousti, A., Georgiades, A. and Tsiropoulos, Z. (2010) A Study on Calorific Energy Values of Biomass Residue Pellets for Heating Purposes. Proceedings of the 43rd FORMEC Conference on Forest Engineering: Meeting the Needs of the Society and the Environment, Padova, 11-14 July 2010.
Sotelo Montes, C., Silva, D.A., Garcia, R.A., Muñiz, G.I.B. and Weber, J.C. (2011) Calorific Value of Prosopis africana and Balanites aegyptiaca Wood: Relationships with Tree Growth, Wood Density and Rainfall Gradients in the West African Sahel. Biomass Bioenergy, 35, 346-353. http://dx.doi.org/10.1016/j.biombioe.2010.08.058
DD CEN/TS 14918 (2005) Solid Bio Fuels e Method for the Determination of Calorific Value.
Erakhrumen, A.A. (2009) Energy Value as a Factor of Agroforestry Wood Species Selectivity in Akinyele and Ido Local Government Areas of Oyo State, Nigeria. Biomass Bioenergy, 33, 1428-1434. http://dx.doi.org/10.1016/j.biombioe.2009.06.007
Telmo, C. and Lousada, J. (2011) The Explained Variation by Lignin and Extractive Contents on Higher Heating Value of Wood. Biomass Bioenergy, 35, 1663-1667. http://dx.doi.org/10.1016/j.biombioe.2010.12.038
Günther, B., Gebauer, K., Barkowski, W., Rosenthal, M. and Bues, C.-T. (2012) Calorific Value of Selected Wood Species and Wood Products. European Journal of Wood and Wood Products, 70, 755-757. http://dx.doi.org/10.1007/s00107-012-0613-z
Patel, B. and Gami, B. (2012) Biomass Characterization and Its Use as Solid Fuel for Combustion. Iranica Journal of Energy & Environment, 3, 123-128. http://dx.doi.org/10.5829/idosi.ijee.2012.03.02.0071
Núñez-Regueira, L., Proupin-Castiñeiras, J. and RodriguezAñón, J.A. (2002) Energy Evaluation of Forest Residues Originated from Eucalyptus globules Labill in Galicia. Bioresource Technology, 82, 5-13. http://dx.doi.org/10.1016/S0960-8524(01)00156-0
Boundy, B., Diegel, S.W., Wright, L. and Davis, S.C. (2011) Biomass Energy Data Book: Edition 4. Energy Efficiency and Renewable Energy, US Department of Energy. http://cta.ornl.gov/bedb
Bahadori, A., Zahedi, G., Zendehboudi, S. and Jamili, A. (2014) Estimation of the Effect of Biomass Moisture Content on the Direct Combustion of Sugarcane Bagasse in Boilers. International Journal of Sustainable Energy, 33, 349-356. http://dx.doi.org/10.1080/14786451.2012.748766
Sluiter, A., Hames, B., Ruiz, R., Scarlata, C., Sluiter, J. and Templeton, D. (2008) Determination of Ash in Biomass. National Renewable Energy Laboratory, Golden, CO.
Biedermann, F. and Obernberger, I. (2005) Ash-Related Problems during Biomass Combustion and Possibilities for a Sustainable Ash Utilization. Austrian Bioenergy Centre GmbH, Bios Bioenergiesysteme GmbH. http://www.bios-bioenergy.at/uploads/media/Paper-Biedermann-AshRelated-2005-10-11.pdf
Oosterhuis, D.M. and Jernstedt, J. (1999) Morphology and Anatomy of the Cotton Plant (Chapter 2.1). In: Smith, W.C. and Cothren, J.T., Eds., Cotton: Origin, History, Technology, and Production, John Wiley & Sons, Inc.
Ramos, P.A.B., Guerra, Â.R., Guerreiro, O., Freire, C.S.R., Silva, A.M.S., Duarte, M.F. and Silvestre, A.J.D. (2013) Lipophilic Extracts of Cynara cardunculus L. var. Altilis (DC): A Source of Valuable Bioactive Terpenic Compounds. Journal of Agricultural and Food Chemistry, 61, 8420-8429. http://dx.doi.org/10.1021/jf402253a
Shen, H., Fu, C., Xiao, X., Ray, T., Tang, Y., Wang, Z. and Chen, F. (2009) Developmental Control of Lignification in Stems of Lowland Switch-Grass Variety Alamo and the Effects on Saccharification Efficiency. BioEnergy Research, 2, 233-245. http://dx.doi.org/10.1007/s12155-009-9058-6
Miklovic, S. (2000) Typha angustifolia Management: Implications for Glacial Marsh Restoration. Restoration and Reclamation Review, 6, 1-11.
Swearingen, J. and Saltonstall, K. (2010) Phragmites Field Guide: Distinguishing Native and Exotic Forms of Common Reed (Phragmites australis) in the United States. Plant Conservation Alliance, Weeds Gone Wild. http://www.nps.gov/plants/alien/pubs/index.htm
ASAE (2001) Method of Determining and Expressing Fineness of Feed Materials by Sieving, ASAE S319.3. American Society of Agricultural Engineers, St. Joseph, 573-576.
Chang, R. (2000) Physical Chemistry for the Chemical and Biological Sciences. University Science Books, Sausalito, 74-117.
CEN/TS 14918:2005 (2005) Solidbio Fuels—Method for the Determination of Calorific Value, 66.
Hennessy, W. (2010) Review of Wood Fuel Testing Standards. CRL Energy Report No. 10-11013 for EECA, Wellington, 33.
CEN/TS 14774-1:2009 (2009) Solid Biofuels—Methods for the Determination of Moisture Content—Oven Dry Method Total Moisture—Reference Method, 12.
CEN/TS 14775:2004 (2004) Solid Biofuels—Method for the Determination of Ash Content, 12.
Haykiri-Acma, H. and Yaman, S. (2011) Comparison of the Combustion Behaviors of Agricultural Wastes under Dry Air and Oxygen. Proceedings of the World Renewable Energy Congress: Bioenergy Technology (BE), Linköping, 8-13 May 2011. http://dx.doi.org/10.3384/ecp11057251
Karaj, S. and Müller, J. (2010) Determination of Physical, Mechanical and Chemical Properties of Seeds and Kernels of Jatropha curcas L. Industrial Crops and Products, 32, 129-138. http://dx.doi.org/10.1016/j.indcrop.2010.04.001
Wannapeera, J., Worasuwannarak, N. and Pipatmanomai, S. (2008) Product Yields and Characteristics of Rice Husk, Rice Straw and Corncob during Fast Pyrolysis in a Drop-Tube/Fixed-Bed Reactor. Songklanakarin Journal of Science and Technology, 30, 393-304.
Poddar, S., Kamruzzaman, M., Sujan, S.M.A., Hossain, M., Jamal, M.S., Gafur, M.A. and Khanam, M. (2014) Effect of Compression Pressure on Lignocellulosic Biomass Pellet to Improve Fuel Properties: Higher Heating Value. Fuel, 131, 43-48. http://dx.doi.org/10.1016/j.fuel.2014.04.061
Valchev, I., Lasheva, V., Tzolov, T.Z. and Josifov, N. (2009) Silica Products from Rice Hulls. Journal of the University of Chemical Technology and Metallurgy, 44, 257-261.
Ludueña, L., Fasce, D., Alvarez, V.A. and Stefani, P.M. (2011) Nanocellulose from Rice Husk Following Alkaline Treatment to Remove Silica. BioResources, 6, 1440-1453.
Kludze, Η., Deen, Β. and Dutta, Α. (2013) Impact of Agronomic Treatments on Fuel Characteristics of Herbaceous Biomass for Combustion. Fuel Processing Technology, 109, 96-102. http://dx.doi.org/10.1016/j.fuproc.2012.09.043
Christian, D.G., Riche, A.B. and Yates, N.E. (2002) The Yield and Composition of Switch-Grass and Coastal Panic Grass Grown as a Biofuel in Southern England. Bioresource Technology, 83, 115-124. http://dx.doi.org/10.1016/S0960-8524(01)00201-2
Vamvuka, D., Topouzi, V. and Sfakiotakis, S. (2010) Evaluation of Production Yield and Thermal Processing of Switch-Grass as a Bio-Energy Crop for the Mediterranean Region. Fuel Processing Technology, 91, 988-996. http://dx.doi.org/10.1016/j.fuproc.2010.02.018
Mani, S., Tabil, L.G. and Sokhansanj, S. (2003) An Overview of Compaction of Biomass Grinds. Powder Handling and Processing, 15, 160-168.
Mani, S., Tabil, L.G. and Sokhansanj, S. (2004) Grinding Performance and Physical Properties of Wheat and Barley Straws, Corn-Stover and Switch-Grass. Biomass and Bioenergy, 27, 339-352. http://dx.doi.org/10.1016/j.biombioe.2004.03.007