The thermal activation of Ngwo clay from southeastern Nigeria for optimal leaching of alumina was investigated. The clay assayed 24.63% Al 2 O 3 and 52.15% SiO 2 , comprising mainly kaolinite mineral and free silica or quartz. The alumina locked up in the clay structure was rendered acid-soluble by thermal activation which transformed the clay from its crystalline nature to an amorphous, porous phase or metakaolinite. The clay samples were heated at calcination temperatures of 500 ° C, 600 ° C, 700 ° C, 800 ° C, and 900 ° C at holding times of 30, 60, and 90 minutes. Uncalcined clay samples and samples calcined at 1000 ° C (holding for 60 minutes) were used in the control experiments. After leaching the resulting clay calcines in 1 M hydrochloric acid solution at room temperature, it was observed that the clay calcines produced at 700 ° C (holding for 60 minutes) responded most to leaching. Samples calcined for 60 minutes also responded better than those held for 30 or 90 minutes. Based on activation energy studies, it was observed that calcines produced at 700 ° C (for 60 minutes) had both the highest leaching response (51.84% after 1 hour at leaching temperature of 100 ° C) and the lowest activation energy of 25.03 kJ/mol. It is concluded therefore that Ngwo kaolinite clay should be best calcined for alumina dissolution by heating up to 700 ° C and holding for 60 minutes at that temperature. The clay deposit has potential for use as alternative resource for alumina production in Nigeria where bauxite is scarce .
Hudson, K., Misra, C. and Wefers, K. (1997) Aluminium Oxide. In: Habashi, F., Ed., Handbook of Extractive Metallurgy, Volume II, Part 3: Light Metals, John Wiley & Sons, Inc., New York, 1062-1068.
Hudson, K., Misra, C. and Wefers, K. (1997) Bauxite, the Principal Alumina Raw Material. In: Habashi, F., Ed., Handbook of Extractive Metallurgy, Volume II, Part 3: Light Metals, John Wiley & Sons, Inc., New York, 1068-1072.
Hudson, K., Misra, C. and Wefers, K. (1997) Other Processes for Alumina Production. In: Habashi, F., Ed., Handbook of Extractive Metallurgy, Volume II, Part 3: Light Metals, John Wiley & Sons, Inc., New York, 1091-1094.
Hudson, L.K., Misra, C., Perrotta, A.J., Wefers, K. and Williams, F.S. (2011) Aluminum Oxide. In: Elvers, B., Ed., Ullman’s Encyclopedia of Industrial Chemistry, 7th Edition, Wiley-VCH, Weiheim, 40 p.
Habashi, F. (1995) Bayer’s Process for Alumina Production: A Historical Perspective. Bulletin of Historical Chemistry, 17-18, 15-19.
Habashi, F. (2005) A Short History of Hydrometallurgy. Hydrometallurgy, 79, 15-22. https://doi.org/10.1016/j.hydromet.2004.01.008
United States Geological Survey (USGS) (2013) Bauxite and Alumina. In: Lee, E., Bray, L.M., White and Miller, L.D., Coms., 2013 Minerals Yearbook, Advance Release, 13 p.
United States Geological Survey (USGS) (2015) Aluminium: Mineral Commodity Summaries. 16-17. (Compiled by E. Lee Bray) https://doi.org/10.3133/70140094
United States Geological Survey (USGS) (2015) Bauxite and Alumina: Mineral Commodity Summaries. 26-27. (Compiled by E. Lee Bray) https://doi.org/10.3133/70140094
United States Geological Survey (USGS) (2015) Bauxite and Alumina: Mineral Industry Surveys, First Quarter of 2015. 1-5. (Compiled by E. Lee Bray & Linda M. Barnes)
Schwarz, T. (1997) Distribution and Genesis of Bauxite on the Mambilla Plateau, SE Nigeria. Applied Geochemistry, 12, 119-131. https://doi.org/10.1016/s0883-2927(96)00058-3
Petters, S.W. (1993) Metallic and Nonmetallic (Industrial) Minerals. In: Adalemo, I.A. and Baba, J.M., Eds., Nigeria: Giant in the Tropics, Volume 1: A Compendium, Gabuno Pub. Ltd., Lagos, 61.
Obaje, N.G. (2009) Geology and Mineral Resources of Nigeria: Lecture Notes in Earth Sciences 120. Springer, London, 52, 118-119, 183-201. https://doi.org/10.1007/978-3-540-92685-6
Wright, J.B., Hastings, D.A., Jones, W.B. and Williams, H.R. (1985) Geology and Mineral Resources of West Africa. George Allen & Unwin Ltd., London, 35, 48-49, 87, 119, 145, 157. https://doi.org/10.1007/978-94-015-3932-6
Malomo, S. (2011) Framework and Opportunities for Sustainable Private Sector Participation in Solid Minerals Development in Ekiti State. Ekiti State Economic Development Summit.
Talabi, A.O., Ademilua, O.L., Ajayi, O.Z. and Ogunniyi, S.O. (2013) Preliminary Geophysical Evaluation of Orin Bauxite Deposit, Southwestern Nigeria. Journal of Emerging Trends in Engineering and Applied Sciences, 4, 432-437.
Sada, M.M. (2013) Mid-Term Report for the Minerals and Metals Sector. Ministerial Platform Presented by Minister, Ministry of Mines and Steel Development (MMSD).
Aliyu, A. (1996) Potentials of the Solid Minerals Industry in Nigeria. RMRDC, Abuja, 1-40, 63-83, 164-172.
Pabalkar, V.V. (1999) Nigerian Aluminium Industry: Scope and Prospects. Proceedings of the 16th Annual Conference of the Nigerian Metallurgical Society (NMS), Abuja, 3rd-5th November 1999, 1-7.
Okorie, B.A. (2000) The Metallurgical Industry and National Development. 2nd Annual NAMMES Conference Tagged “FUTO 2000”, Owerri, 16-17 March 2000, 8 p.
Adeniji, G. (2009) An Overview of Nigeria’s Solid Minerals Sector. Accenture Knowledge Event, 1-10.
Fejokwu, L.C. (1996) Nigeria: A Viable Black Power. Volume 2: Resources, Potentials and Challenges. Polcom Press, Lagos, 375-385.
Shackelford, J.F. (2015) Introduction to Materials Science for Engineers. 8th Edition, Pearson Higher Education Inc., Upper Saddle River, 71-72.
Attah, L.E. and Oden, M.I. (2010) Physico-Chemical Properties and Industrial Potential of Some Clay Deposits in Calabar Area, South Eastern Nigeria. Global Journal of Environmental Sciences, 9, 39-49.
Velde, B. (1995) Composition and Mineralogy of Clay Minerals. In: Velde, B., Ed., Origin and Mineralogy of Clays: Clays and the Environment, Springer, Verlag, 8-29. https://doi.org/10.1007/978-3-662-12648-6_2
Mark, U. and Onyemaobi, O.O. (2009) Assessment of the Industrial Potentials of Some Nigerian Kaolinitic Clay Deposits. International Research Journal in Engineering, Science & Technology, 6, 77-84.
Chakraborty, A.K. (2014) Phase Transformations of Kaolinite Clay. Springer, New Delhi, 3-12, 43-47, 185-206, 327-329. https://doi.org/10.1007/978-81-322-1154-9
Velde, B. (1992) Introduction to Clay Minerals: Chemistry, Origins, Uses and Environmental Significance. Chapman & Hall, London, 1-17, 55-82, 96.
Fahrenholtz, W.G. (2008) Clays. In: Shackelford, J.F. and Doremus, R.H., Eds., Ceramic and Glass Materials: Structure, Properties and Processing, Springer, New York, 111-133. https://doi.org/10.1007/978-0-387-73362-3_7
Kaolinite (2015) In Wikipedia. https://en.wikipedia.org/w/index.php?title=Kaolinite&oldid=693335566
Duval, D.J., Risbud, S.H. and Shackelford, J.F. (2008) Mullite. In: Shackelford, J.F. and Doremus, R.H., Eds., Ceramic and Glass Materials: Structure, Properties and Processing, Springer, New York, 27-39. https://doi.org/10.1007/978-0-387-73362-3_2
Lamberov, A.A., Sitnikova, E.Yu. and Abdulga, A.Sh. (2012) Kinetic Features of Phase Transformation of Kaolinite into Metakaolinite for Kaolin Clays from Different Deposits. Russian Journal of Applied Chemistry, 85, 892-897. https://doi.org/10.1134/S1070427212060109
Ghosh, A. and Ghosh, S. (2014) A Textbook of Metallurgical Kinetics. PHI Learning Private Ltd., Delhi, 1-10, 82-100, 151-185, 301-319.
Gupta, C.K. (2003) Chemical Metallurgy: Principles and Practice. Wiley-VCH Verlag GmbH & Co., Weinheim, 31-52, 459-499.
Rao, S.R.R. (2006) Hydrometallurgical Processes. In: Resource Recovery and Recycling from Metallurgical Wastes, Waste Management Series Volume 7, Elsevier Science, Oxford, Chapter 4, 71-108.
Brown, T.L., LeMay Jr., H.E., Bursten, B.E., Murphy, C.J. and Woodward, P.M. (2012) Chemistry: The Central Science. 12th Edition, Pearson Education Inc., New York, 512-655.
Al-Zahrani, A.A. and Abdul-Majid, M.H. (2009) Extraction of Alumina from Local Clays by Hydrochloric Acid Process. Engineering Science: Journal of King Abdulaziz University, 20, 29-41.
Al-Ajeel, A.W.A. and Al-Sindy, S.I. (2006) Alumina Recovery from Iraqi Kaolinitic Clay by Hydrochloric Acid Route. Iraqi Bulletin of Geology and Mining, 2, 67-76.
Ajemba, R.O. and Onukwuli, O.D. (2012) Determination of the Optimum Dissolution Conditions of Ukpor Clay in Hydrochloric Acid Using Response Surface Methodology. International Journal of Engineering Research and Applications, 2, 732-742.
Udeigwe, U., Onukwuli, O.D., Ajemba, R. and Ude, C.N. (2015) Kinetic Studies of Hydrochloric Acid Leaching of Alumina from Agbaja Clay. International Journal of Research in Advanced Engineering and Technology, 1, 64-72.