Solid polymeric electrolyte of poly(ethylene)oxide-50% epoxidized natural rubber-lithium triflate (PEO-ENR50-LiCF3SO3)
- 1
- 2
- 3
- 4
Abstract
A solid polymer electrolyte (SPE) films consist-ing of polyethylene oxide (PEO), 50% epoxi-dized natural rubber (ENR50) and LiCF3SO3 with various compositions of PEO-ENR50 and vari-ous weight percentage of LiCF3SO3 were pre-pared by solution casting technique. The poly-mer electrolyte films were characterized using DSC, XRD and AC impedance spectroscopy. The SPE with the PEO-ENR50 composition of 70-30 shows the highest conductivity of 4.2 × 10-5 Scm-1 at the 15 wt.% of LiCF3SO3 compared with the other composition of PEO/ENR50. This composition was then chosen to investigate the effect of LiCF3SO3 on the thermal property, structure and conductivity of the electrolyte. The highest room temperature conductivity of 1.4 × 10-4 Scm-1 was achieved at 20 wt.% of LiCF3SO3. The conductivity result is supported by the DSC and XRD analysis which showed the semi- crystalline nature of PEO turning to amor-phous state due to the increase in LiCF3SO3 content.
- Latif, F., Madzlan, A., Nasir, K., Abd, M.M.A. and Muhd, Z.Y. (2006) The role and impact of rubber in poly(methyl metacrylate)/lithium triflate. Journal of Power Sources, 159, 1401-1404.
- Dissanayake, M.A.K.L., Bandara, L.R.A.K., Karaliyadda, L.H., Jayathilaka, P.A.R.D. and Bokalawala, R.S.P. (2006) Thermal and electrical properties for SPE PEO9Mg(ClO4)2 incoprating nano porous Al2O3 filler. Solid State Ionics, 177, 343-346.
- Reddy, V.S.C., Wu, G.P., Zhao, C.X., Jin, W., Zhu, Q.Y., Chen, W. and Sun-il, M. (2007) Mesoporous silica (MCM-41) effect on PEO+LiAsF6 solid polymer elec-trolyte. Current Applied Physics, 7, 655-661.
- Scrosati, B., Croce, F., and Panero, S. (2001) Progress in lithium polymer battery R&D. Journal of Power Sources, 100, 93-100.
- Fenton, D.E., Parker, J.M. and Wright, P.V. (1973) Com-plexes of alkali metal ions with poly (ethylene oxide). Polymer, 14, 589.
- Kumar, B., Rodrigues, S.J. and Koka, S. (2002) The crys-talline to amorphous transition in PEO-based composite electrolytes: Role of lithium salts. Electrochimica Acta, 47, 4125-4131.
- Natesan, B., Karan, N.K., Rivera, M.B., Aliev, F.M. and Katiyar, R.S. (2006) Segmental relaxation and ion trans-port in polymer electrolyte films by dielectric spectros-copy. Journal of Non-Crystalline Solids, 352, 5205-5209.
- Fan, L., Dang, Z., Wei, G., Ce-Wen, N. and Li, M. (2003) Effect of nanosized ZnO on the electrical properties of (PEO)16LiClO4 electrolytes. Material Science and Engi-neering B, 99, 340-343.
- Mohapatra, S.R., Thakur, A.K. and Choudhary, R.N.P., (2008) Studies on PEO-based sodium ion conducting composite polymer films. Ionics, 14, 255-262.
- Xiong, H.M., Zhao, K.K., Zhao, X., Wang, Y.W. and Chen, J.S. (2003) Elucidating the conductivity enhance-ment effect of nano sized SnO2 fillers in hybrid polymer electrolyte PEO-SnO2-LiClO4. Solid State Ionics, 159, 89-95.
- Glasse, M.D., Idris, R., Latham, R.J., Linford, R.G. and Schlindwein, W.S. (2002) Polymer electrolytes based on modified natural rubber. Solid State Ionics, 147, 289-294.
- Idris, R., Glasse, M.D., Latham, R.J., Linford, R.G. and Schlindwein, W.S. (2001) Polymer electrolytes based on modified natural rubber for use in rechargeable lithium batteries. Journal of Power Sources, 94, 206-211.
- Benedict, T.J. Banumathi, S. Veluchamy, A. Gangadharan, R. Zulfihar, A.A. and Rajendran, S. (1998) Characteriza-tion of plastisized solid polymer electrolyte by XRD and AC Impedance methods. Journal of Power Sources, 75, 171-174.