Research ArticleOpen AccessGoogle Scholar indexed
Estimation of road dust using BSNEs
Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
- 1 Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
- 2 Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
- 3 Department of Civil, Environmental and Natural Resources Engineering, Lule? University of Technology, Lule?, Sweden
Copy link · social · email
Abstract
Mining is a core industry in Sweden and plays an important role in the economic development throughout the country. Though the importance of mining dust has been well recognized, the quantification of dust production with regard to individual source activity has rarely been done in Sweden. Depending on the type of source activity, dust estimation method can be chosen from three alternatives: exposure profiling methods, back calculation method, and wind erosion prediction method. Also included in the paper is an example of experiment, which was executed on two unpaved roads in Lulea, Sweden by using exposure profiling method. The experiment concluded that dust emission due to vehicle transportation is strongly dependent on traveling speed and road bed material.
KeywordsRoad DustDust MeasurementBSNEs
- Fitz, D.R., Bumiller, K., Etyemezian, V., Kuhns, H. and Nikolich, G. (2005) Measurement of PM10 emission rate from roadways in Las Vegas, Nevada using a SCAMPER mobile platform with real-time sensors. The 14th International Emission Inventory Conference, Las Vegas, 12-14 April 2004.
- Kuhns, H., Etyemezian, V., Landwehr, D., MacDougall, C., Pitchford, M. and Green, M. (2001) Testing re-entrained aerosol kinetic emissions from roads (TRAKER): A new approach to infer silt loading on roadways. Atomospheric Environment, 35, 2815-2825. doi:10.1016/S1352-2310(01)00079-6
- Hussein, T., Johansson, C., Karlsson, H. and Hansson, H. (2008) Factors affecting non-tailpipe aerosol particle emissions from paved roads: On-road measurements in Stockholm, Sweden. Atmospheric Environment, 42, 688-702. doi:10.1016/j.atmosenv.2007.09.064
- Pirjola, L., Johansson, C., Kupiainen, K., Stojiljkovic, A., Karlsson, H. and Hussein, T. (2010) Road dust emissions from paved roads measurement using different mobile systems. Air & Waste Management Association, 60, 14221433. doi:10.3155/1047-3289.60.12.1422
- Edvardsson, K. (2010) Evaluation of dust suppressants for gravel roads: Methods development and efficiency studies. Doctoral Thesis in Civil Architectural Engineering, Stockholm.
- US EPA (1995) Compilation air pollutant emission factors. Report No. AP-42, US Environmental Protection Agency, Research Triangle Park, North Carolina.
- Simon, J. van D. and Edward, L.S. (2001) A field test of the wind erosion prediction system, 2001 ASAE Annual international meeting. Sacramento Convention Center, Sacramento.
- Fryear, D.W. (1986) Afield dust sampler. Journal of Soil and Water Conservation, 41, 117-120.
- Goossens, D. and Offer, Z.Y. (2000) Wind tunnel and field calibration of six aeolian dust samplers. Atmospheric Environment, 34, 1043-1057. doi:10.1016/S1352-2310(99)00376-3
- Goossens, D., Offer, Z.Y. and London, G. (2000) Wind tunnel and field calibration of five aeolian sand traps. Geomorphology, 35, 233-252. doi:10.1016/S0169-555X(00)00041-6
- Sharrat, B., Feng, G. and Wendling, L. (2007) Loss of soil and PM10 from agricultural fields associated with high winds on the Columbia Plateau. Earth Surface Processes and Landforms, 32, 621-630. doi:10.1002/esp.1425
- Pye, K. and Tsoar, H. (1990). Aeolian Sand and Sand Dunes. Unwin Hyman, London.