Efficiency of Coir Particle Board for Acoustic & Thermal Applications
- 1 IPIRTI, Tumkur Road, Bangalore, Karnataka, India
- 2 IPIRTI, Tumkur Road, Bangalore, Karnataka, India
- 3 IPIRTI, Tumkur Road, Bangalore, Karnataka, India
- 4 IPIRTI, Tumkur Road, Bangalore, Karnataka, India
- 5 IPIRTI, Tumkur Road, Bangalore, Karnataka, India
Abstract
Coir fibre is extracted from the husk of coconut and is used in products such as floor mats, door mats, brushes and mattresses and in many applications. Here coir fibres are used to make particle boards of densities 300, 400 and 500 kg/m 3 using UF resin to determine its efficiency for interior applications like acoustic and thermal properties and also tested for Indian standard 3129. Noise Reduction Coefficient (NRC) of all the boards decreases with an increase in density. Maximum sound absorption coefficient for all three densities was found in the frequency range of 2500 to 30,000 Hz. Among three densities, 300 kg/m 3 board shows the maximum absorption coefficient at frequency 3000 Hz. The thermal conductivity results of all three densities boards increase with an increase in density. Modulus of Rupture for all three densities were meeting the requirement of standard. Results reveal that particle board manufactured from coir fibre can be used for acoustic and thermal insulation applications.
- Verma, D., Gope, P.C., Shandilyal, A., Guptal, A. and Maheshwari, M.K. (2013) Coir Fibre Reinforcement and Application in Polymer Composites: A Review. Journal of Materials and Environmental Science, 4, 263-276.
- Lawniezak, M. and Zielinshes, S. (1961) Mechanical and Technological Properties of Flaxboard. Holz als Roh und Werkstoff, 19, 232-239. https://doi.org/10.1007/BF02612519
- Yang, H, Kim, D.-J. and Kim, H.-J. (2003) Rice Straw-Wood Particle Composite for Sound Absorbing Wooden Construction Materials. Journal of Bioresource Technology, 86, 117-121. https://doi.org/10.1016/S0960-8524(02)00163-3
- Mamatha, B.S., Nandanwar, A., Sujatha, D., Uday, D.N. and Kiran, M.C. (2014) Particle Board from Bagasse for Acoustic Panel. International Journal of Fundamental Applied Science, 3, 42-44.
- Tabarsaa, T., Jahanshahia, S. and Ashorib, A. (2011) Mechanical and Physical Properties of Wheat Straw Boards Bonded with a Tannin Modified Phenol-Formaldehyde Adhesive. Journal of Composites Part B: Engineering, 42, 176-180. https://doi.org/10.1016/j.compositesb.2010.09.012
- Karlinasari, L. and Hermawan, D. (2012) Acoustical Properties of Particle Boards Made from Betung Bamboo (Dendrocalamus asper) as Building Constructional Material. Journal of Bioresource Technology, 7, 5700-5709. https://doi.org/10.15376/biores.7.4.5700-5709
- Markiewicz, E., Paukszta, D. and Borysiak, S. (2012) Acoustic and Dielectric Properties of Polypropylene-Lignocellulosic Materials Composites. In: Polypropylene, Chapter 12, InTech, London, 193-216.
- Fatima, S. and Mohanty, A.R. (2011) Acoustical and Fire-Retardant Properties of Jute Composite Materials. Journal of Applied Acoustics, 72, 108-114. https://doi.org/10.1016/j.apacoust.2010.10.005
- Nandanwar, A., Kiran, M.C. and Varadarajulu, K.C. (2017) Influence of Density on Sound Absorption Coefficient of Fibre Board. Open Journal of Acoustics, 7, 1-9. https://doi.org/10.4236/oja.2017.71001
- Zhou, X.Y., Zheng, F., Li, H.G. and Lu, C.L. (2010) An Environment-Friendly Thermal Insulation Material from Cotton Stalk Fibers. Energy and Buildings, 42, 1070-1074. https://doi.org/10.1016/j.enbuild.2010.01.020
- Bekalo, S.A. and Reinhardt, H.W. (2010) Fibers of Coffee Husk and Hulls for the Production of Particleboard. Materials and Structures, 43, 1049-1960. https://doi.org/10.1617/s11527-009-9565-0
- Al-Ajlan, S.A. (2006) Measurements of Thermal Properties of Insulation Materials by Using Transient Plane Source Technique. Applied Thermal Engineering, 26, 2184-2191. https://doi.org/10.1016/j.applthermaleng.2006.04.006