Slotted Hole Effect on Damage Mechanism of Gymnasium Building with RC Frame and Steel Roof
- 1 Oyu Tolgoi Project Team, Premium Industrial and Engineering LLC, Ulaanbaatar, Mongolia
- 2 Architectural Course, National Institute of Technology: Sendai College, Natori, Japa
- 3 Graduate School of Engineering, Tohoku University, Sendai, Japan
Abstract
On the 2011 off the Pacific Coast of Tohoku Earthquake, gymnasium buildings exhibited the unexpected structural damages, which prevented a use as evacuation shelters in during- and post-disaster periods. The major failure occurr ing on the connection between the RC column top and steel roof as well as the cracks in the RC column base w as observed during the emergent inspection. According to the earlier studies, it was implied that the presence of the slotted hole possibly deteriorates the seismic capacity; however, the length of slotted hole was fixed at a certain value. Facing this concern, this research attempts to clarify the influence of the slotted hole length through a comprehensive parametric study by pushover and seismic response analyses. In conclusion, it has been discovered that the slotted hole deteriorates the seismic capacity for the connection failure up to almost 50% of that without slotted hole. Moreover, the discrepancy of characteristics obtained by the static and dynamic analyses is originated by means of the presence of slotted hole. This slotted hole effect should be noted by structural engineers and researchers to provide the adequate seismic diagnosis and strengthening.
- [1] Joint Editorial Committee for the Report on the Great East Japan Earthquake Disaster (2014) Report on the Great East Japan Earthquake Disaster-Building Series Volume 3 Structural Damage to Steel Buildings and Structural Damage to Shell and Spatial Structures. Architectural Institute of Japan. (In Japanese)
- Japan Organization of Advancing Construction Technology (2015) Guideline of Seismic Diagnosis and Strengthening of RC Frame with Steel Roof. Gihodo Shuppan Co. Ltd., Tokyo. (In Japanese)
- Inaba, Y., et al. (2018) Cyclic Loading Tests on Steel Roof Bearings and Effects on Roof Responses. Journal of Structural and Construction Engineering (Transactions of AIJ), 83, 1129-1137. (In Japanese) https://doi.org/10.3130/aijs.83.1129
- Ito, K., Yamashita, T. and Watanabe, S. (2019) Cyclic Shear Loading Test and Strength Evaluation on Roof Bearings. Journal of Structural and Construction Engineering (Transactions of AIJ), 84, 649-657. (In Japanese) https://doi.org/10.3130/aijs.84.649
- Yamashita, T. and Wada, N. (2019) Study on Stability in Sliding of Bearings Supporting Large-Span Steel Roofs. Journal of Structural and Construction Engineering (Transactions of AIJ), 84, 1251-1258. (In Japanese) https://doi.org/10.3130/aijs.84.1251
- Shimada, Y., et al. (2020) Method of Reinforcement for Joints between Steel Roofs and RC Columns in Existing Buildings. Engineering Structures, 209, Article ID: 110255. https://doi.org/10.1016/j.engstruct.2020.110255
- Narita, K., Takeuchi, T. and Matsui, R. (2013) Seismic Performance of School Gymnasia with Steel Roofs Supported by Cantilevered RC Wall Frames. Journal of Structural and Construction Engineering (Transactions of AIJ), 78, 1895-1904. (In Japanese) https://doi.org/10.3130/aijs.78.1895
- Terazawa, Y., et al. (2015) Damage Control of Composite Gymnasium Structures with Energy-Dissipation Roof Bearings. Eighth International Conference on Behavior of Steel Structures in Seismic Areas, Shanghai, 1 June 2015, Paper ID 52.
- Kimura, T., Ohsaki, M. and Sato, K. (2020) Structural Optimization of Supporting Structure of School Gymnasium with Steel Roof for Seismic Response Reduction of Bearing Reaction Forces. Journal of Structural and Construction Engineering (Transactions of AIJ), 85, 61-71. (In Japanese) https://doi.org/10.3130/aijs.85.61
- Watanabe, S. and Yamashita, T. (2020) Earthquake Response Analysis of Steel Roof Gymnasiums Considering Nonlinear Restoring Force Characteristics of Lower Structure and Roof Bearings. Journal of Structural and Construction Engineering (Transactions of AIJ), 85, 209-218. (In Japanese) https://doi.org/10.3130/aijs.85.209