Development of a Dynamic Modulus Prediction Model for Hot Mixture Asphalt and Study of the Impact of Aggregate Type and Its Electrochemical Properties

Abstract

The most famous model known in prediction of dynamic modulus for asphalt concretes is the Witczak and Hirsh models. These models didn’t use the mineralogical and chemical properties of aggregates. Witczak models used the passing or refusal percentage to sieve diameters and Hirsh model use d the volumetric analysis. All models developed until now considered that the aggregates were geotechnical conforming to standards. In this study the first mineralogical and chemical properties were considered through the percentage of silica in the rock source of aggregates and the electric aggregate particles charge zeta. Dynamic modulus values used for regression process are determined from complex modulus test on nine asphalt concretes mix designed with aggregate types (basalt of Diack, quartzite of Bakel and Limestone of Bandia). Between Twelve initial inputs , the statistical regression by exclusion process keeps only seven parameters as input for the model. The mineralogical model showed good accuracy with R 2 equal to 0.09. The student test on the model parameters showed that all the parameters included in the model were meaningful with good p inferior to 0.05. The Fisher test on the model showed the same result. The analysis of the sensitivity of the mineralogical model to zet a potential showed that the dynamic modulus increase s with the positive zeta-potentials and decrease s with the negative zeta-potentials. The analysis of the sensitivity of the mineralogical model to the silica showed that the dynamic modulus decreases with the increase of the silica.